Xena 2001

briankstan

Deathstar “Moon” Wall Art. (hueforge)&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Sky Blue Transmission Distance: 4 PLA+ White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #9 (0.8mm) swap to Sky Blue At layer #14 (1.2mm) swap to White for the rest.

Starwars Deathstar "Moon" 

Hue Forge

Ahrenp

Tool storage mounts (for BXA tools and MT3 tools) that fit on the back of the chip tray for a King Canada KC1236 lathe along with a tool post dial indicator holder. For BXA size tools holders and tool posts. Inspired by other models I've seen, but none of them fit properly so I made my own.&nbsp;The indicator holder is for a standard 2-1/4" diameter lug back dial indicator (AGD2). Designed for a 3/8"-16 UNC stud installed in the top hole with a nut for tool height adjustment. The indicator is mounted with a 1/4"-20 UNC x 3/4" long screw (an M6 x 18 or similar should work as well). Both holes are dimensioned as the tap drill size for the two imperial threads listed above. I would recommend running a tap down into these holes before installing the screw/threaded rod but it may be possible to install them directly and have them form their own threads.

Lathe BXA Tool Post Accessories

Tools

dragons

packNsnap

You can scale as big as will fit, but DO NOT scale Z height.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Blue At layer #9 (0.8mm) swap to Orange At layer #16 (1.36mm) swap to Jade White for the rest.

Hue Forge

Tools

dragons

Hue Forge - Comercial