XPrints

OFF5PRING

This is my contribution for the Easter design contest here on MakerWorld.&nbsp;It is a 2-Part print the Egg and the tiny printer. Feel free to download, share and post your makes:)The tiny Benchy is just the regular one but only 10mm in length.

Surprise Egg 3D Printer Easter Egg

holidays

testing/calibration

MoreanMan

Added these bars for additional support, as the first attempt of printing the original model I made came out brittle and snapped while cleaning. Printed vertically with supports. Snaps on and off really easy, I recommend adding a cloth to the interior so the screen has something soft between the cover and it.

Reinforced Steam Deck Blast Shield

gaming 

SuteRoozu

Sized up & sliced a file from a miniature to be wearable. Hopefully it works out for you too!

Hollow Knight Wearable Helmet Sliced

cosplay

T3D Objects

Hi, this is a plant pot with hearts which is a great gift for valentines day!

Valentine Hearts plant pot

planters

measuring

GlennovitS 3D

Need boxes to store and organize your bits and pieces - or just organize your messy drawer in your desk - then print some Gridfinity boxes! These are quick to print - yet sturdy enough for most usecases.These lite bins shows the grid in the bottom of the boxes, instead of a flat surface. This saves A LOT of filament and printtime in the long run! But if you for some reasons need a flat bottom in the boxes, please see my Classic Boxes.The Gridfinity system is made to fit into a grid as a base - and these boxes can be stacked if needed.<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/425849/2024-01-19_ec1bd933a0909.jpeg"></figure><h2>Types</h2>There are 2 variants of boxes in this collection - with different benefits for you. If in doubt, try one of each and see for yourself what you like the best.<ul><li>0.8 mm (the thin version - 0.8 mm walls - to save some filament)</li><li>1.2 mm (the stronger version - 1.2 mm walls - a little stronger for heavier items)</li></ul><h2>Sizes</h2>They are organized in folders (and Bambu Project files) with different size categories for you to easier find the size you need. Within each folder are alle sizes of boxes.Files are named by the default Gridfinity standard AxBxC-D<ul><li>A: Width of the box (each section is 42 mm)</li><li>B: Length of the box (each section is 42 mm)</li><li>C: Height of the box (each section is 7 mm - fx. 6 = 42 mm heigh)</li><li>D: Thickness of walls (0.8 mm or 1.2 mm to be filament friendly or stronger)</li></ul>Boxes come in sizes from 1x1 (42x42 mm) to 6x6 (252x252 mm)<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/425849/2024-01-19_5249119036c7c8.gif"></figure><h2>Want more Gridfinity? YES!</h2>To organize the boxes in a drawer or on the desk, use the baseplates for the Gridfinity system.Or maybe want a tray, pen holder, circular holder or more? - see my other projects!<a target="_blank" href="https://makerworld.com/en/u/1370313339/collections/427128" rel="nofollow noopener">https://makerworld.com/en/u/1370313339/collections/427128</a><h2>Print instructions</h2>These tips can maybe help<ul><li>Speed on first layer: 50% (or less) (To ensure good bed adhesion and perfect fit)</li><li>Supports: NO supports.</li></ul>&nbsp;Happy printing!And special thanks to Zack Freedman for starting the Gridfinity System!<h2>Want to show your support?</h2>You can see ALL my designs here on Printables - and you can become an active supporter. I would really appreciate it!⭐️ <a target="_blank" href="https://www.printables.com/@GlennovitS3D" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D</a> ⭐️

Gridfinity Box Lite - Filament friendly bins

gridfinity

michal0082

Hello friends, we have a remake of my model. Mickey and Minnie Mouse Valentines box. Printing is fully compatible with AMS Other Valentine models are here:<a target="_blank" href="https://makerworld.com/en/u/1621874954/collections/178953" rel="nofollow noopener">https://makerworld.com/en/u/1621874954/collections/178953</a>&nbsp;

Mickey and Minnie Mouse Valentines Box

gifts

Martin Kozak

<h3>Model</h3>Print profiles have been divided by color.&nbsp;<h3>Postprocessing</h3><ul><li>Remove supports (some parts have pre-modelled supports, some have slicer supports, some combination of both).</li><li>Use deburring tool to remove sacrificial bridging inside the holes.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/424155/2023-12-30_7f665c461fbba.jpg"></figure><ul><li>Please use 4pcs of M2 screws to join 50163_a (black) and 50163_b (dark grey) parts together. Inner gear must rotate freele in outer ring.</li><li>TPU beams are split into two halfs. Please gluew two and two rods together. Insert filament into center hole to reinforce the connection.</li></ul><h3>Assembly</h3><ul><li>See attached assembly guide.</li><li>Due to the printer tolerances and nature of FDM printing, sometimes you'll need to apply more strength to assemble, some parts will be little loose and need a glue to secure it in position and whole drive train will need a lubrication in order to make it work smoothly (PTFE lubrication or silicion oil in spray recommended).</li></ul>See my other upscaled creation:<ul><li><a target="_blank" href="https://makerworld.com/en/models/114353#profileId-122927" rel="nofollow noopener">https://makerworld.com/en/models/114353#profileId-122927</a></li><li><a target="_blank" href="https://makerworld.com/en/models/133466#profileId-144784" rel="nofollow noopener">https://makerworld.com/en/models/133466#profileId-144784</a></li></ul>&nbsp;

Compact Excavator 300 %

toys

bh_aragorn

This is a slim case for the Teenage Engineering series of Pocket Operators with numerical buttons that is inspired by the official Teenage Engineering CA-X case.&nbsp;I was looking for a slim case for my pocket operators, but all the cases I found on Printables, Thingiverse, etc., were too bulky for me. So, I modeled this case from scratch in Fusion 360 to be printable in one go with a multi-materials system (I used the Bambu Lab P1S with AMS) and without the need to print buttons separately. The buttons in this case are attached to the upper part of the case with thin bridges, so they don't fall out. You also don't have to break off the hanger tab at the top!&nbsp;The print comes in three parts: Upper, Lower, and Battery Cover. The Upper part of the case has supports modeled in, as well as support interface layers. The interface layers are meant to be printed with a support material (I tried PETG with limited success, don't have PLA support material yet). Eventually, I decided to try and scale down the support interface layers in the z-direction, so there are three “empty” layers above it, and that worked just fine for me (I selected all support interface layers and reduced their z-height to about 94%). The 3mf file for the Upper case is all set up to be printed with Orcaslicer on a Bambu Lab P1S with AMS and a 0.2mm nozzle, just using PLA.&nbsp;If you're printing this with my 3mf file, you'll have to carefully release the buttons first before tearing out the rest of the supports. I used a dental pick to gently pry them off the support interface while holding the rest of the button down with my finger. The buttons are attached with a thin bridge to the main Upper case, so be careful or you'll rip out the buttons altogether (had that happen, too – you can glue them back on with superglue, but it's not pretty).&nbsp;If you're setting up your print from scratch, make sure to either use support material for the interface layers (they will show up as “PETG (#)” in your slicer) or reduce their z-height a bit, so there's a space between the top layer of the interface and the bottom layer of the actual parts.The actual supports should be set up to be printed with a single perimeter, two bottom and top layers, and 4% infill, I used aligned rectilinear pattern.&nbsp;You can play around with the top surface patterns to get a different “look” of the case. I really liked the Hilbert Curve pattern, but it messed up the pocket operator logo at the top. I eventually ended up with Octagram Spiral, and I think it looks great!&nbsp;Choose your own colors for the pocket operator logo, the button text, and the button cover for the record button. I just mirrored the colors of the official case because I had one already. Now all my POs look similar, see picture.&nbsp;The Lower part of the case is a straightforward print – I printed it with tree supports on build plate only (there are some locking tabs that have 90º overhangs, so supports are necessary for a clean print so the case closes tightly after printing). The lower part will snap onto the upper part. You may have to slightly bend the sides out of the way to thread the 1/8" jacks of the PO through the Lower part.&nbsp;The Battery Cover is printed from TPU, so it's flexible and can be removed to change batteries. It fits snugly, so it doesn't fall off.I'm including the Fusion 360 file in case you'd like to edit the design yourself (e.g., remove the slots for the hanger tab etc.)Let me know in the comments how it goes – would love to see your pictures!&nbsp;

Pocket Operator Slim Case (inspired by official TE silicon case)

music

giamma933

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Matte Scarlet Red Transmission Distance: 2PLA BambuLab Basic blue silk Transmission Distance: 3.5PLA BambuLab Basic Jade White Transmission Distance: 4&nbsp;Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Scarlet RedAt layer #12 (1.04mm) swap to blue silAt layer #20 (1.68mm) swap to Jade White for the rest.&nbsp;

Spiderman hueforge painted final 

decorations

ARTICAT

Check out another amazing addition to your kitchen, PEPPER SEED REMOVER:<a target="_blank" href="https://makerworld.com/en/models/143388#profileId-155917" rel="nofollow noopener">https://makerworld.com/en/models/143388#profileId-155917</a>&nbsp;&nbsp;Summary:Elevate your kitchen organization with our 3D printed Kitchen Utensil Holder.This versatile stand is designed to elegantly hold wooden spoons, cooking utensils, and even hot pot lids, bringing both style and functionality to your culinary space.&nbsp;Features:Multi-Functional Design: Accommodates various kitchen tools and pot lids.Stylish and Durable: Enhances your kitchen decor while providing a durable solution.Easy Access: Keep essential utensils within reach for seamless cooking.&nbsp;Transform your cooking experience with this practical and chic Kitchen Utensil Holder - where form meets function! 💡🍳✨

Kitchen Utensil Holder

organization

OlleMark

Updates:2023-12-19 - Made the allen keys easier to remove2023-12-22 - Added space for the PTFE comb and added space for the A1 standard nozzle wiper.2023-12-25 - Added more labelbodys for the a1 standard.2023-12-28 - Added slightly more space for the A1 standard nozzle wiper..Introducing my small accessory box for the a1 series that fits all of the a1 accessories with a lid that locks in place. A bunch of different labels have been provided to fit your needs. :).Designed to be as compact as possible and with a similar lid deisgn as my other accessory boxes you can just slide the lid on the underside when the box is in use and then put it back when the box is being stowed away. The lid has a new locking mechanism i have been working on and can easely be released by pressing both of the release “buttons” on each side..I have provided a blank lid and label if that is your preference :).I printed the lid and label with 1mm top and bottom thickness to avoid any infill and the bottom of the box is printed with 0.6mm bottom thickness and 1mm top thickness with 15% gyroid infill. Everything else is stock bambulabs settings.

Small A1 Series Accessory Box

prints for the printer

Stag 3D

<h3>How to play:</h3><ol><li>Setup the base on a flat surface and place the Tetra Balance block onto it.</li><li>Take it in turns with your opponent to place the blocks onto the Tetra Balance piece. You can place the blocks with one hand only and once you have chosen a bloke you cannot change it.</li><li>Repeat until the tower eventually falls. </li><li>If you cause the tower to fall your opponent wins. </li></ol>&nbsp;