WyoBombTech

Kit Crafters

<p>This <strong>Swivel Fidget Toy</strong> is an easy to print and assemble toy that&#39;s both satisfying to use and hear.</p><p>&nbsp;</p><p>There&#39;s a nice audible click when the swivel part snaps into position on the base. It can swivel into 3 different positions in a rotation or you can click it back and forth.</p><p>&nbsp;</p><p>The files provided support either 6mm diameter magnets or 5mm magnets. Both 2mm and 3mm thick magnets work. Both profiles are <strong>100% infill</strong> to make the toy feel more hefty in your hand!</p><p>&nbsp;</p><p>Here are the supported magnet sizes:</p><ul><li>6x2mm</li><li>6x3mm</li><li>5x2mm</li><li>5x3mm</li></ul><p>When printing the Swivel, different filaments and calibrations may make it too loose or too tight for the magnet to fit. I recommend changing the <strong>X-Y hole compensation</strong> to make it closer to being too loose so that the magnet can be inserted and super-glued if needed. The uploaded profiles have <u>0.095 mm</u> for the X-Y hole compensation that I find works very well with Bambu Lab PLA.</p><p>&nbsp;</p><p>Here&#39;s what the setting looks like in Bambu Studio:</p><p><img src="https://makerworld.bblmw.com/makerworld/draft/162725/2023-11-04_5b222f1a15cd.png"></p><p>&nbsp;</p><p>My prototypes use <a target="_blank" href="https://www.amazon.com/260Pcs-Refrigerator-Magnets-Fridge-Whiteboard/dp/B07XRQ44VC/ref=sr_1_3?crid=3MG27ATZ9CZ64&amp;keywords=6x2mm+magnets&amp;qid=1699161422&amp;sprefix=6x2mm+magn%2Caps%2C136&amp;sr=8-3" rel="nofollow noopener">these 6x2mm magnets</a>, <a target="_blank" href="https://www.amazon.com/FINDMAG-Refrigerator-Magnets-Premium-Whiteboard/dp/B08M3GHMWN/ref=sr_1_4?crid=3CZD5H0QGJJ6G&amp;keywords=5x2mm+magnets&amp;qid=1699203020&amp;sprefix=5x2m%2Caps%2C171&amp;sr=8-4" rel="nofollow noopener">these 5x2mm magnets</a>, as well as <strong>Bambu PLA Matte</strong> and Basic. Enjoy and make sure to put your magnets in the right orientations!</p>

Swivel - Fidget Toy

Magnet stuff

Joker 3D

<p>Started to print all the Super Mario Brothers Character & really liked this STAR model BUT needed it with 2 colors (Yellow&black for the eyes) - so made a remix. Thanks @ReProps from printables for great model!</p><p>&nbsp;</p><p>Added a Stand for it.<br><br>Print in 3 Colors: Yellow for the Body, Black for the eyes & Gold for the stand.<br><br>Enjoy!</p>

Super Star [SUPER MARIO]

For Jax

Grimdar

Milk Crate

Maybe

SPStudio

<h4><strong>I update, revise and improve my design for my fixes very often. Please only use my Print Profile (Labelled as Designer or SPStudio) to ensure this fix is updated & work well.</strong><span style="color:#E14747;"><strong> Profile with Non-Designer tags may be of poor functionality or non updated model.</strong></span></h4><p>Click on <span style="color:#E14747;"><strong>Like</strong></span> if this model helped you in some way. It is very important and will help increase the exposure of this design to more people who might need it. Cheers!</p><p>&nbsp;</p><p>&nbsp;</p><blockquote><p><strong>Announcement</strong></p><p>New and Improved V2 Versions for the Ams Buffer Fix <a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">Before Buffer</a> and <a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">After Buffer</a> have just been released. Do check them out in my profile to see what are the improvement. Thank you for your continuous support.</p><figure class="image image_resized" style="width:33.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2023-12-21_db335e9276f41.jpg"></figure></blockquote><h2> </h2><blockquote><p><strong>Update 13 Nov 04:45am SGT</strong>: I have just released new fixes to supplement the existing fixes. I would recommend you to install these fixes to help further improve the Ams and Printer system. You can get them in my Profile. </p><p>&nbsp;</p><p>Ams Buffer Ptfe Right Guide Mount Fix & Extruder Ams Filament Pull Back Fix  & The Smooth 4 Way Splitter </p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2023-11-21_dcf79fcacc4fa.png"></figure></blockquote><p>&nbsp;</p><p><a target="_blank" href="https://makerworld.com/en/models/56906#profileId-58572" rel="nofollow noopener">A completely brand new design update For Ams Filament Pull Back Error have been launched. It's well designed & precisely measured compared to this V1. Get it by clicking here or search for Ams Filament Pull Back Fix V2 Upgraded. </a></p><p>&nbsp;</p><p><span style="color:#E14747;"><strong>Important Note</strong></span>: This new design is used to replace this older version. You can choose to use any of the version or try 1 then if it doesn't work very well then try the other one, but <strong>please do not use both new and old model together</strong>. It will make things worse.</p><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2023-11-04_9ffdaf00db085.png"></figure><p>&nbsp;</p><p>&nbsp;</p><p>If you prefer to try out the Og Version one, Please read on.</p><p>This is suitable for all Bambu Printer series.</p><p>&nbsp;</p><p>&nbsp;</p><blockquote><p><strong>Quick update:</strong> New installation video updated. For those who tried this fix and it didn't work or work well, please check & ensure the fix is not pressing on any of the Ams wiring harness when you reassembled the Ams there are 3 gaps in total and its designed in such a way that sufficient space to allow all wiring cables to pass <span style="color:#E14747;">underneath</span> the gaps and not be press / pinched on the fix after reassembly.</p></blockquote><h2> </h2><h2>Introduction</h2><p>Failed to pull back filament error can be caused by multiple different variables & factors. This is a part of an series of Ams fixes that i have designed which can complement each other when used together. I do suggest you install all my fixes together for the 0ptimal effect to help your filament travel properly across the entire system which in turn can help improve, reduce or remove any potential Ams errors.</p><p>&nbsp;</p><p><strong>I have grouped all fixes into their respective Collection for ease of searching what to install.</strong></p><p>&nbsp;</p><p><span style="color:#E14747;"><strong>V2 Collection are improvements done on the shortcoming of V1 Collection. </strong></span>Feel free to try <strong>V2 Collection</strong> and if it doesn't work properly then you can try the<strong> V1 Collection</strong>. You can easily find each of the <strong>Collection</strong> by clicking on the Collections tab on my profile.</p><p>&nbsp;</p><p>Unfortunately there isn't a single fix that can 100% work for everyone. What works for others, may not work for you but my fixes is definately a great place to start and have worked for majority of the users. My fixes are precisely measured then modelled. A <strong>Proper Fix</strong> would have the highest chance to reduce or solve the error.</p><p>&nbsp;</p><figure class="image image_resized" style="width:81.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-09_cd9c426e40212.jpg"></figure><h2> </h2><h2><strong>If you are too bored to read the entire lengthy write up explaining the need for this fix, here is the TL:DR.</strong></h2><p><strong>What is this?</strong><br>Ams Fix Failed To Pull Back Filament Retraction Error will correct the internal Ptfe tubes angle inside the Ams and maintain a nearly straight Ptfe feeding into the Ams motor to reduce friction and pressure.</p><p>&nbsp;</p><p>Koen Burkink's <a target="_blank" href="https://www.facebook.com/groups/bambulabofficialusers/posts/1075261490084536/?comment_id=1075391176738234&notif_id=1697488005459532&notif_t=group_comment_follow" rel="nofollow noopener">post</a> / founding of the possible cause for Slot 3 (and possibly 2) Ptfe tube not a straight enough feed to the filament hub inside the Ams and causing failure in pulling the filament out. So i have did some measurement and i realised that all 4 Ptfe tube in the Ams bend at certain degree and not 100% straight into the feeder thus i have made this simple but very effective solution. </p><p>&nbsp;</p><p>&nbsp;</p><p><strong>Who needs this fix? </strong><br>1) Constantly having errors like Failed To Pull Out Filament and similar related</p><p>2) The Ams motor sounds like struggling when move filament in and out of the Ams to the Extruder, like a lot of friction when moving.</p><p>3) Ams cannot load or unloading properly. (Not including Spool being too light or a break of filament in the Ams)</p><p>4) Having a constant struggle on any of your Ams slots, people complained about Slot 2 and 3 but this fix is designed to fix all of 4 slots for Failed To Retract / Pull Out Filament Error.</p><p>&nbsp;</p><p>&nbsp;</p><p><strong>Have this fix been tested?</strong></p><p>Yes on 1 X1C, 1 P1P and 2 P1S about 67300 retractions with 0 error so far. Many other users have tested and most feedbacks have been really positive. </p><p>&nbsp;</p><p>&nbsp;</p><p><strong>Why use this fix?</strong></p><p>This is ez to print but yet its measurement is very precise. I have taken measurements down to millimeters in degree to confirmed the proper angle to move the internal Ptfe to allow filament to pass through smoothly and then printed multiples models to ensure that my fix works by properly aligning the internal Ptfe tube to reduce and possibility even eliminating the dreadful Failed To Pull Out Filament Error or similar related problems. </p><p>&nbsp;</p><p>The angle and Accuracy of the hole that the Ptfe Pass through is very precisely measured, the design is also well supported and made in such a way that it will not move inside the Ams while the filament move through it. </p><p>&nbsp;</p><p>If a fix is “Free hanging without support”  likely wont be a permanent solution as it will allow the Ptfe to move during printing, which totally goes against the purpose of this fix of holding the Ptfe in place. </p><p>&nbsp;</p><p>&nbsp;</p><h2>Installation Video</h2><figure class="media"><div data-oembed-url="https://youtu.be/Wl5Kq3Ndhmc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Wl5Kq3Ndhmc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><p>&nbsp;</p><h2>Important Notes:</h2><p>&nbsp;</p><p>NOTE 1: The Ptfe Tube is supposed to be tight and snug for the proper angle accuracy. Plz make sure you installed it correctly as per the video instruction.</p><p>&nbsp;</p><p>NOTE 2: Does not fit Hydra Ams</p><p>&nbsp;</p><p>Note 3: Do note that the orientation during install should be as per video and images. if your Ptfe tube is bent at a different angle it means you are installing it wrongly.</p><p>&nbsp;</p><p>Note 4: You are required to properly assembled the Ams including the 2 screws that you unscrewed during the disassembly as this model require everything to be tight and snug for it to work properly.</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><h2>What Mod / Fixes / Enhancement do i offer?</h2><p><span style="color:#E14747;"><strong>Please don't download the wrong one. </strong></span>Only those in the photos below is designed by me who painstakingly took a lot of time to measure carefully and design just to get it working. #SupportOriginal Love you guys for all the support so far!</p><p>&nbsp;</p><p>- <a target="_blank" href="https://makerworld.com/en/models/47982" rel="nofollow noopener">Ams FIX Failed To Retract Filament Error (a preventive measure and solve the bay 2 and 3 error and prevent bay 1 and 4 to have any possibility of having an error due to tension and friction)</a> <strong>(Updated design on the 2nd photo below, try 1 then if it doesn't works properly for you then install the other one.)</strong></p><p>&nbsp;</p><figure class="image image_resized" style="width:74.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_2e40f9b49d622.jpg"></figure><p>&nbsp;</p><p><a target="_blank" href="https://makerworld.com/en/models/56906" rel="nofollow noopener">(BRAND NEW) Ams Filament Pull Back Fix V2 Upgraded - Completely New Design Upgrade For Ams Filament Pull Back ERROR! Precisely Measured</a></p><p>&nbsp;</p><figure class="image image_resized" style="width:75.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_9c729f1a3501a.webp"></figure><p>&nbsp;</p><p><a target="_blank" href="https://makerworld.com/en/models/52782" rel="nofollow noopener">- Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a></p><p>&nbsp;</p><figure class="image image_resized" style="width:75.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_14c8811c47696.webp"></figure><p>&nbsp;</p><p><a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">- V2 Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a></p><p>&nbsp;</p><figure class="image image_resized" style="width:76.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_6194006084695.jpg"></figure><p>&nbsp;</p><p><a target="_blank" href="https://makerworld.com/en/models/53037" rel="nofollow noopener">- Ams Fix - Stack the Ams on tp (Using a carefully measured holder to hold the Ptfe in a curved angle that will allow filament to go through with the least possible amount of friction when the Ams is stacked on tp of the printer)</a></p><p>&nbsp;</p><figure class="image image_resized" style="width:77.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_e6ff2df6c7873.jpg"></figure><p>&nbsp;</p><p><a target="_blank" href="https://makerworld.com/en/models/58543" rel="nofollow noopener">- Ams Buffer Ptfe Right Guide Mount Fix will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder.</a></p><p>&nbsp;</p><figure class="image image_resized" style="width:78.46%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_f95cf24ce5c9e.jpg"></figure><p>&nbsp;</p><p><a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">- V2 Ams Buffer Right Ptfe Guide Mount - The Fix For Failed To Pull Back Filament a newly improved fix designed to replaced the V1 This will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder. ez Installation. No screws needed!</a></p><p>&nbsp;</p><figure class="image image_resized" style="width:79.5%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_6ddf689393292.jpg"></figure><p>&nbsp;</p><p><a target="_blank" href="https://makerworld.com/en/models/63021" rel="nofollow noopener">- Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a></p><p>&nbsp;</p><figure class="image image_resized" style="width:82.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_4c9e59fa5529e.jpg"></figure><p>&nbsp;</p><p><a target="_blank" href="https://makerworld.com/en/models/103987" rel="nofollow noopener">- V2 Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a></p><p>&nbsp;</p><figure class="image image_resized" style="width:81.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_69d2ccb8ac279.jpg"></figure><p>&nbsp;</p><p><a target="_blank" href="https://makerworld.com/en/models/67779" rel="nofollow noopener">- The Smooth 4 Way Splitter. Look No Further. Combined with Ams Hub Lite together with this small attachment, you will have the Smooth 4 Way Splitter.</a></p><p>&nbsp;</p><figure class="image image_resized" style="width:83.64%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2023-11-19_96f9eed020e9b.gif"></figure><p>&nbsp;</p>

AMS Fix Failed To Pull Back Filament Error

AMS FIXES

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3><span style="color: hsl(0,0%,100%)">Introduction</span></h3></td></tr><tr><td><p>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed:<br>So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..</p><p>That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.</p><p>As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.</p><p>&nbsp;</p><p>Thanks,<br><strong>Ben Levi</strong></p><p><a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)</p><p>&nbsp;</p></td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2><p>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).</p><ul><li>Easy installation</li><li>Dual LED strip<br>installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td><p>&nbsp;</p><figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2><p>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:</p><figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><p style="text-align: center"><strong>Printing Time</strong></p></td><td>70~85 print hours - including color switching!</td></tr><tr><td><p style="text-align: center"><strong>Printer</strong></p></td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td><p style="text-align: center"><strong>Filament</strong></p></td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul><p>* Feel free to choose your own colors.</p></td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure><p>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. <strong>Click on the pictures to enlarge.</strong></p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p>&nbsp;</p><h2>Printing settings</h2><p>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.</p><p>Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results <strong>(click to enlarge):</strong></p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure><p>Please note that you will find in also wonderful print profiles from the community too :)</p><h2> </h2><h2>Assembly instructions</h2><p>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:</p><h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3><p>Please print x2 Button insert.stl files and assemble as the photo below:</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg"></p><p>&nbsp;</p><h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project.<br>please make sure to choose: “white” and “Strip-USB Button” options.<br> </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files:<br><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2><span style="color: hsl(0,0%,100%)">Changelog</span></h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items<br> </li></ul></td></tr></tbody></table></figure>

BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

TO MAKE