Wise Works

Pathfinder.Ant

可扩展性四轴飞行器框架：尽量使用高韧性材料，例如ABS+等

可扩展性四轴飞行器框架

Drones

Vincent B.

Modular hexagonal Trellis for house plant that does not require glue. Easy to assemble without tools.&nbsp;Parts available in three different pre scaled sizes:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/599029/2024-02-23_1757d3fe3ee5d.png"></figure><ul><li>stakes with varying amounts and locations of connectors</li><li>hexagonal sections with varying amounts and locations of connectors</li><li>X connectors (two needed per side)</li></ul>Assemble:<ul><li>layout your design before printing in the slicer to make sure you have the right parts for your design. For hexagons that connect on 3 sides you will need to use flat connecters for one of the sides. (don't mix different sizes)</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/599029/2024-02-23_0943686fe71e4.png"><img src="https://makerworld.bblmw.com/makerworld/draft/599029/2024-02-23_d47ac657d26e5.png"><ul><li>take your first part and add a X connector to each empty space</li></ul><figure class="image image_resized" style="width:52.73%;"><img src="https://makerworld.bblmw.com/makerworld/draft/599029/2024-02-23_3ac7bc50e1141.jpg"></figure><ul><li>take the part you want to connect to it and flip it, so it is upside down compared to the part you want to connect it to</li></ul><figure class="image image_resized" style="width:53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/599029/2024-02-23_3f1c399dfa709.jpg"></figure><ul><li>with the first part laying on a table line up the empty connector spots with the connectors on the first part</li></ul><figure class="image image_resized" style="width:53.59%;"><img src="https://makerworld.bblmw.com/makerworld/draft/599029/2024-02-23_c1b6550681889.jpg"></figure><ul><li>push down on the new part till it is lying flat on the table (you can use a mallet if the connectors are tight, but you shouldn't have to)</li></ul><figure class="image image_resized" style="width:54.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/599029/2024-02-23_3ee3081c6296.jpg"></figure><ul><li>repeat for each new part till you have a finished trellis</li></ul>Things to keep in mind:<ul><li>If your trellis needs to be very stiff glue the pieces together at the connectors. A small drop of superglue or even wood glue should work fine.</li><li>You can always scale up the parts if you want a bigger trellis but make sure they are all scaled the same amount. Scaling down the trellis may result in weak or improperly fitting connections especially if you use a bigger nozzle to print it.</li><li>You can use multiple stakes if you want a bigger trellis. You could even bridge multiple pots of plants together with the right design.</li><li>A UV resistant filament will lengthen the life of the print if you intend to use it for a plant that requires direct sunlight. You may notice color fading with some filaments left in direct sunlight.</li><li>If you run into a situation where the part you need isn't available reach out and I can add it, or you can always model your own. I'm sure I missed some combinations of connectors. (If you do make your own models that work with mine, please post a remix. I would love to see your cool designs.)</li></ul>

Modular Hexagon House Plant Trellis (with multiple sizes)

Plants

HpInvent

The mini Phone Pillow: Crafted to resemble a cozy cushion, this unique accessory is actually made from durable plastic. Its plush design provides a comfortable resting place for your device, seamlessly blending functionality with style.&nbsp;The model was roughly sized to the dimensions of an iPhone 15 Pro Max. However, the pillow is usable for any phone and easy to scale. Here&#39;s the workflow I use for most size adjustments in the slicer:First, take the phone you want to adjust the model to. Roughly measure the width and depth of the phone and note down these values. Then simply load the model into the slicer or open my profile there. Right-click on the build plate and select Add primitive -&gt; Cube to add a cube. Now scale this cube using the Scale function in the slicer to match the measured width and depth of your phone. Next, scale the actual pillow model to fit the size so that the cube you just created fits perfectly into the opening. Finally, delete the cube; it was only used to simulate the phone.&nbsp;Due to many requests for commercial licenses for my 3D models I created a patreon page. You can become a member to get permission for commercial use or just want to support my work : <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener">https://www.patreon.com/user?u=79128277</a>  There you can also find exclusive Models for Patreon Subscribers only ;) If you Just want to give a one time Support you can buy me a coffe here ;)  <a target="_blank" href="https://buymeacoffee.com/hpinvent" rel="nofollow noopener">https://buymeacoffee.com/hpinvent</a>&nbsp;Here is a small Sneak Peak of a coming Bathroom Set  More Information about the launch date and early acces can be found on my Patreon. <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485155/design/2024-06-14_835436fae26ee.png"></a>&nbsp;Also check out my other Designs!I have a bunch more stuff in my profile!! <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a><a target="_blank" href="https://makerworld.com/en/models/428498" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485155/design/2024-04-18_7588ba5642a27.png"></a><a target="_blank" href="https://makerworld.com/en/models/426994" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485155/design/2024-04-15_b0f8912a15393.png"></a><a target="_blank" href="https://makerworld.com/en/models/427979" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485155/design/2024-04-15_b1e75bac7bd51.png"></a><a target="_blank" href="https://makerworld.com/en/models/416941" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485155/design/2024-04-08_ebe2de8bae1b3.png"></a><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485155/design/2024-03-06_ea517b7dbe741.png"></a><a target="_blank" href="https://makerworld.com/en/models/394559" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485155/design/2024-03-27_3b061a50c97b7.png"></a> <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485155/design/2024-03-08_a8a626fc04c78.png"></a>  &nbsp;&nbsp;&nbsp;Happy printing!&nbsp;

The mini Phone Pillow

Phone stands

musicalbigfoot

Bring the Jurassic to your jewelry box with these Stegosaurus dinosaur earrings, perfect for those who appreciate a hint of whimsy in their daily attire. These earrings showcase an eye-catching gradient that blends up to four colors, enhancing the distinct silhouette of the Stegosaurus with its iconic plated back. The design is inspired by modern vector-style art, providing a simplified yet striking depiction of this well-loved dinosaur. With symmetry in design, these earrings present the same delightful image on each side, crafted for style and comfort during everyday wear.&nbsp;Optimal Layer Changes:This model should be 10 layers at 0.08mm layer height. Color swaps should happen on layers 4, 6, and 8 for optimal results.&nbsp;Assembly: Apply super glue to one side and attach the opposite side. Optionally apply a tiny dab of glue on the extremities will keep the tiny bits together. Feel free to go wild with the earring hardware - leave a comment showing your works of art!&nbsp;Note: The original profile that was uploaded includes a ‘hole punch’ negative object on each earring body - these holes were meticulously placed in order to maintain balance, if you notice your earrings are hanging off-center then check your hole punch object placement!

Stegosaurus - Dino Earrings / Series 1

Earrings

Eternity Labs

I made this because I am a scientist and secrretly I want superpowers - These coasters are engineered to be different to the average bit of plastic you see on makerworld.&nbsp;Features: <ul><li>holes in the top surface to stop the coaster sticking to the bottom of your drink</li><li>Channels underneath the coaster to stop it sticking to the bar counter, and to allow liquids to flow under it. </li></ul>I hope you like my design - This is No.1 in a series of fun Lab safety coasters. I will make more if these prove to be popular! &nbsp;In truth I would never cross lab safety, but its fun to dream about falling into a vat of toxic waste, being bitten by a radioactive spider or even being the last son of Krypton!&nbsp;I hope you enjoy this model.&nbsp;Consider giving me a boost if this model was useful!&nbsp;Ways to support me &amp; access to commercial licences:&nbsp;<a target="_blank" href="https://www.patreon.com/Eternity3D" rel="nofollow noopener">https://www.patreon.com/Eternity3D</a> - Free membership available for some .stl access, paid membership needed to resell prints of my designs.&nbsp;One Time Direct support - <a target="_blank" href="https://buymeacoffee.com/eternity3d" rel="nofollow noopener">https://buymeacoffee.com/eternity3d</a>

I Want Super Powers - Coaster - Style No.1 

Coasters

chremmler

Gridfinity Utility Knife Blade Storage. Made for 6x2 magnets. The Wedge is holding the blades in place, no matter how may are left. You can pull it out to take blades out or refill and put it back in. Because of the wedge design it stays in place. Container sits flush to other Gridfinity containers. Wedge is printed with a ca. 0,10mm gap. It works perfect with my printer Set-up but you might need to tweak the scale in width depending on your printer set-up. No Supports needed since steepest angle is 45°.

Gridfinity Utility Knife Blade Storage

Gridfinity

Canadian Gamer

Puzzle Box Lid - R2D2&nbsp;This is a custom lid that works with the base of my puzzle gift box which can be found here: <a target="_blank" href="https://makerworld.com/en/models/446736#profileId-353234" rel="nofollow noopener">https://makerworld.com/en/models/446736#profileId-353234</a> I wanted a way to be able to gift a puzzle, but for that person to know what the puzzle should look like when they put it together. So this is a 100x100mm Hueforge built into the lid of my puzzle gift box. The bottom of the box will easily hold a puzzle that is 200x200mm. You can find the R2D2 puzzle here: <a target="_blank" href="https://makerworld.com/en/models/481427#profileId-393249" rel="nofollow noopener">https://makerworld.com/en/models/481427#profileId-393249</a>&nbsp;As well as my other puzzles and lids in this puzzle collection here: <a target="_blank" href="https://makerworld.com/@CanadianGamer/collections/988102" rel="nofollow noopener">https://makerworld.com/@CanadianGamer/collections/988102</a>&nbsp;-----------------------------------&nbsp;If you&#39;re looking for a commercial license to sell my prints, or to make a custom puzzle &amp; lid design request, please head over to my Patreon where those options are available: <a target="_blank" href="https://www.patreon.com/CanadianGamer3DPrintsEDM" rel="nofollow noopener">https://www.patreon.com/CanadianGamer3DPrintsEDM</a>&nbsp;-----------------------------------&nbsp;***IMPORTANT***&nbsp;If you slice my print profile you may get a warning about floating regions. You can ignore this, its due to the fact that we transition from 10% infill to 100% infill in the model.&nbsp;My print profile for this lid has built in adaptive layers, so the lid itself will print with 10% infill at 0.2mm layer heights, but when it starts to print the hueforge topper, it will switch to 100% infill at 0.08mm layer heights. The Colour swaps are built into my print profile.&nbsp;If you slice the STL yourself, you will need to set up the file and are responsible for your layer heights, colour swaps, and infill.&nbsp;R2D2 Puzzle Box Lid - Printing Instructions&nbsp;Swap Instructions:Start with BlackAt 3.24mm swap to Marine BlueAt 3.80mm swap to SilverAt 4.20mm swap to Ivory White for the rest.

Puzzle Box Lid - R2D2

Star wars

WindyEle

You can create your own custom keychain, you use the Customize button and choose icon and text:<ol><li>choose icon;</li><li>insert your name;</li><li>if you like change font and length of keychain;</li><li>discover your keychain.</li></ol>The customizer on makerworld doesn&#39;t support “Chewy” font, than I use Openscad.You need to install the specific font “Chewy” in windows for all users and You can download font at this <a target="_blank" href="https://fonts.google.com/specimen/Chewy" rel="nofollow noopener">link</a>. Copy and paste the code into Openscad from the customizer.With Openscad you can use all the fonts you have installed on windows (for all users).&nbsp;You can customize the colors on Bambu Studio:<figure class="image image_resized" style="width: 59.09%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480322/design/2024-05-31_ab4126df0f5a4.jpg"></figure>&nbsp;

Keychain with icons and text customizable

Keychains

madd0g

Easy to print solid Holder to mount your echo show 5 on a wall.Use 20x10x2mm magnets

Echo Show 5 Wall Mount

Home stuff

Josh-3D

IntroA Case/Stand for your Nintendo Switch, to make it look like a Retro TV!&nbsp;I remember this old TV my dad had when I was a kid, and something struck me, that I wanted that for my Nintendo Switch! A Retro TV styled case to stick it in, for a little added fun when I&#39;m not playing at the big screen. Comes with lots of handy spaces too, to tuck secrets in!&nbsp;The front panel uses magnets to keep secure. There&#39;s a pathway too, to allow for a USB-C cable for power and what have you.&nbsp;There&#39;s a secondary profile included, which has a stand for the TV, to lean it at a more comfortable viewing angle. Not required, but might be desired!<figure class="image image_resized" style="width:29.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_939e426832faf.png"></figure>UpdateAdded a print profile for the original switch! I don&#39;t have an original Switch myself, but a user here helped test the fit and looked good! Will update it if any issues crop up though. I printed a copy to make sure it still prints good and the buttons fit, and they do! Enjoy!&nbsp;Community SpotlightCheck out the <a target="_blank" href="https://makerworld.com/en/models/415649#profileId-317808" rel="nofollow noopener">accessories </a>made by <a target="_blank" href="https://makerworld.com/en/@SteveKeller" rel="nofollow noopener">@SteveKeller</a>! In particular Steve has done a remix of the volume/power buttons for the original, and so make sure to check those out, as I&#39;m willing to bet they&#39;ll have an improved fit (I don&#39;t have the original, so wasn&#39;t able to fully test the fit myself) Lots of other cool stuff too! &nbsp;Tools &amp; AssemblyFeatured Filament:Bambu PLA Basic BrownBambu PLA Metal Iridium GoldBambu PLA Matte Charcoal&nbsp;Tools needed:Hex DriverDrill bit (For clearing out holes on the front panel, for the knobs)&nbsp;Hardware needed:2 M3x8 screws (For the knobs)2 M3x10 screws (For the back)8 4mmx6mm magnets <a target="_blank" href="https://www.amazon.com/dp/B075PMYRFT" rel="nofollow noopener">(Here&#39;s an amazon link to the magnets needed)</a>&nbsp;On the front panel, clear out the holes for the knobs, so you can feed the M3x8 screws in. The holes were capped so the insets on the back side would print cleaner. Once the holes are clear, use M3x8 screws to attach the knobs<figure class="image image_resized" style="width:37.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_be95abb54b4eb.png"></figure>On the back, secure it using 4 M3x10 screws.<figure class="image image_resized" style="width:49.38%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_a4165b1b7550f.png"></figure>Insert the 3 buttons, making sure they line up length-wise. There will be an additional piece to insert in, to help secure the buttons in place when the switch isn&#39;t installed and the front panel isn&#39;t in.<figure class="image image_resized" style="width:50.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_26af293c328f3.png"></figure>Lastly, insert the 8 magnets into the front panel and main case. Be careful with the orientation of the magnets as you insert them! They are press fit and are a one way operation. The fit is very tight, so you wont be able to pull them out once they&#39;re in. Because they are very tight, it&#39;ll seem tough getting them in, but you can do it! I recommend using a tool or something that you can put the magnet on, to help aid in pushing it in.-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Retro TV - Nintendo Switch Case

Nintendo Switch

Hiko 3D

Pumpkin is part of the keycap set created for Halloween 🙀☠<a target="_blank" href="https://emojipedia.org/halloween" rel="nofollow noopener">🎃</a><a target="_blank" href="https://emojipedia.org/es/zombi" rel="nofollow noopener">🧟</a>👻&nbsp;You can create it to decorate your keyboard, you can mix filaments of different colors!! ⌨🎨&nbsp;I recommend not using such high speeds and only need supports on the internal part. &nbsp;This design and many more can be found on my patreon 👈&nbsp;---&nbsp;ESP:&nbsp;&nbsp;&nbsp;Pumpkin es parte del conjunto de teclas creado para Halloween 🙀☠<a target="_blank" href="https://emojipedia.org/halloween" rel="nofollow noopener">🎃</a><a target="_blank" href="https://emojipedia.org/es/zombi" rel="nofollow noopener">🧟</a>👻&nbsp;Puedes crearlo para decorar tu teclado, puedes mezclar filamentos de diferentes colores!! ⌨🎨&nbsp;Recomiendo no usar velocidades tan altas y solo necesita soportes en la parte interna.&nbsp;Este diseño y muchos más los puedes encontrar en mi patreon 👈&nbsp;&nbsp;&nbsp;&nbsp;

Pumpkin keycap - Halloween

Halloween

Jorge Rui

After the release of the final version of the <a target="_blank" href="https://makerworld.com/en/models/469851#profileId-385684" rel="nofollow noopener">Ergo Mouse</a>, which breaks away from the original bamboo lab model&#39;s aesthetics as well as my previous designs, I&#39;m excited to introduce a more refined model featuring generative design. Though this version is merely inspired by automatic generation techniques, it allows for precise control of wall angles, reducing the need for extensive supports. Like the base &#34;Ergo Mouse&#34; model, this version doesn&#39;t require a flat base for printing. However, I recommend using <a target="_blank" href="https://shrsl.com/4ctbi" rel="nofollow noopener">standard or galaxy PLA</a>; Matte PLA tends to have more challenging supports to remove, which can leave marks on the piece. I hope you like it :)&nbsp;Affiliated links for Bambu Lab Material if you want to help a little:<ul><li><a target="_blank" href="https://shrsl.com/4k6e8" rel="nofollow noopener">Galaxy PLA</a></li><li>PLA CF</li><li><a target="_blank" href="https://shrsl.com/4ctbi" rel="nofollow noopener">Normal PLA</a></li></ul>and part of the success on getting the mouse without that flat bottom, and almost without any support scars is the use of Gold PEI build plate, this plate, don&#39;t know why, has a stronger grip when compared to the black one, and they have it for all printers.<ul><li><a target="_blank" href="https://shrsl.com/4jqpm" rel="nofollow noopener">Gold PEI Plate</a> </li></ul>&nbsp;You can get more information on the parent project <a target="_blank" href="https://makerworld.com/en/models/469851#profileId-385684" rel="nofollow noopener">Ergo Mouse</a>,Like the parent project, this mouse uses the <a target="_blank" href="https://shrsl.com/4cpnv" rel="nofollow noopener">wireless mouse kit from bambu lab</a><figure class="image image_resized" style="width: 49.48%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-30_36c3c434cfc4d.png"></figure><h2><a target="_blank" href="https://youtu.be/9TkudRs2iG8" rel="nofollow noopener">Video do assemble the Bambu Lab Wireless Mouse kit with this “skin”</a></h2><blockquote>A Message to you:Hello! I trust everyone is in good spirits.  I&#39;m contacting you because I&#39;m encountered increasing difficulties displaying my work on Facebook and, more so, on Reddit. Although I&#39;m utilizing this platform and others, I&#39;m seeking alternative methods to show my work.  A <a target="_blank" href="https://makerworld.com/en/@Kardes.Design" rel="nofollow noopener">community member</a> (<a target="_blank" href="https://makerworld.com/en/@Kardes.Design" rel="nofollow noopener">Kardes.Design</a>) suggested an abominations called &#34;TikTok&#34;, which I admit I&#39;ve previously attempted with limited success.  Nevertheless, I&#39;m willing to try again to share my development journey and updates. For TikTok users, you can find me at: <a href="www.tiktok.com/@designrepcom" rel="nofollow">www.tiktok.com/@designrepcom</a>.  Your support in sharing would be greatly valued. <a target="_blank" href="https://www.tiktok.com/@designrepcom/video/7375077366575516961?is_from_webapp=1&amp;sender_device=pc&amp;web_id=7374868727643145761" rel="nofollow noopener">And here a tiny clip for this project</a></blockquote><h2> </h2><h2>Context</h2>This mouse has been constructed in a completely different manner from previous versions, with a particular focus on functional and ergonomic aspects. Think of it as a study rather than the final product. Nevertheless, I have decided to release it for those interested in experimenting. What to expect:<ul><li>Optimal comfort level for a hand size within the 90th percentile, which includes most adult male hands.</li><li>Perfect button actuation. Given the button layout in this kit, as well as the limitations imposed by 3D printing, this will be the most suitable key configuration and should work with most printing configurations.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_ad7df10e8eacf.png"><figcaption>A little bit of the design process - Prototype creation (2th iteration on the make)</figcaption></figure><ul><li>I have included a version with specific material for support. Especially for those with an AMS system, this is one of the materials that should always be loaded.<ul><li>It is true that it is somewhat expensive, but if used only on the interface layer, this material will allow for many prints, as only a small amount is used on the contact zone. The advantage is an almost perfect interface zone. Bambu Lab currently offers &#34;<a target="_blank" href="https://shrsl.com/4ctb1" rel="nofollow noopener">Support for PLA</a>,&#34; which is a relatively elastic material with very low adhesion to the piece&#39;s walls. <a target="_blank" href="https://shrsl.com/4jh25" rel="nofollow noopener">PVA</a>, which is water-soluble, can also be used and allows for even superior results. Both are excellent options. The downside is that the printing will take much longer to complete, and the purging effect will consume some of the precious support material.</li></ul></li></ul><blockquote>You can also try using PETG as a support material. Since the melting temperatures of the two materials are similar, they are incompatible (they don&#39;t &#34;fuse&#34; together), which is beneficial for support structures. However, PVA or the specific support material allows for superior results, and in terms of configurations, everything is automated in Bambu Studio.</blockquote>&nbsp;This uses the <a target="_blank" href="https://shrsl.com/4cpnv" rel="nofollow noopener">wireless mouse kit from bambu lab</a><figure class="image image_resized" style="width: 326.094px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-25_94087291ff26c.png"></figure>&nbsp;This was the 1st study, so I will not be making the usual render images this time. Instead, I will share the print to show how clean it comes out. Still available to print, see instruction on the bottom (Ergo Mouse I1.3mf). <figure class="table"><table style="border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_8cd86a130ffdf.png"></figure></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_de1638e12ebd6.png"></figure></td></tr></tbody></table></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_111ea882c522d.png"></figure><blockquote>And since these things don&#39;t come out of nowhere, there is a whole development process needed to make everything go smoothly. Contrary to popular belief, it’s not enough to just know how to use a 3D modeling tool and slicing software; these are just tools in an industrial design process, which is itself part of product design. And you know what? It&#39;s something everyone should try. Simply printing pieces that others have made is just one part of the experience, a small part, not bad, but only a fraction of the experience, if you like to print you should try create something.So, I invite everyone to give it a try. Start by taking the first step: create a simple model using the CAD tool of your choice, or make a clay sculpture, or a model of what you want (I often start with these). What matters is to begin. You already have one thing mastered: printing. Now, just take one more step to become a creator.Jorge Rui</blockquote>&nbsp;

Ergo Mouse - Snake edition

Mouse kit

HangarDesigns

Philadelphia Eagles floating logo sign. THIS IS A MULTI-PART LOGO, that means it does not require an AMS/MMU! This is so the texture of the textured plate will be on the front of all the parts of the sign and to help achieve a 3 dimensional look as all the colors are different thicknesses. The different components (if large enough) are modeled with connecting pins to achieve a press fit, but a bit of CA glue doesn't hurt (ProTip- if CA glue cures without an accelerator, it may leave a smoky residue. If you apply a thin coat of WD-40 and wipe away, this residue will disappear). &nbsp;The base is modeled with an integrated hangar, kickstand, and standoff feet. &nbsp;The holes in the logo and base are designed to accept TPU adapters that allow the acrylic rods (with slight manufacturing diameter deviations) to be installed and removed easily, while remaining secure. These adapters can be found here <a href="https://www.printables.com/model/618429-tpu-bushing-for-floating-logo-signs" rel="nofollow">https://www.printables.com/model/618429-tpu-bushing-for-floating-logo-signs</a>. The inserts are designed with a 2 degree draft angle to lock them in place once installed. I generally print these in clear TPU or a matching color TPU if I have it. I included the F3D file in case you want to change the design to fit any dowel you may have (or print). The dowels I use- <a href="https://www.amazon.com/dp/B09SKYYS5X?psc=1&ref=ppx_yo2ov_dt_b_product_details." rel="nofollow">https://www.amazon.com/dp/B09SKYYS5X?psc=1&ref=ppx_yo2ov_dt_b_product_details.</a>&nbsp;If you like this design, think about buying me a coffee (let's be honest- it's going towards filament)- https://www.buymeacoffee.com/thehangardesigns

NFL Philadelphia Eagles Floating Logo Sign

DesignCraft

This adapter system wraps the edges of a MIKA3D 1kg 193x65mm cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Features:<ul><li>Reusable</li><li>MIKA3D nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Print this model twice for a single spool</li><li>Affix one spool ring adapter on each side of the MIKA3D spool</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

MIKA3D Bambu Lab AMS Cardboard Spool Adapter Ring

Cardboard Spool adapters

jpbruce

This is a small Christmas tree ornament, shaped like the X1Carbon Printer (or P1S if you switch the colours) with a working door.The model is printed in parts and then assembled:<ul><li>the Logo is part of the main body,</li><li>the lid is separate and uses a friction-fit,</li><li>the screen is separate and glued in,</li><li>the door is separate and uses a friction fit on the hinge.</li></ul>&nbsp;Please install the door as I show in the description of my similar model here: <a target="_blank" href="https://makerworld.com/en/models/68257" rel="nofollow noopener">https://makerworld.com/en/models/68257</a>

X1Carbon Christmas Tree Ornament

Christmas

ThreeD-Michael

<figure class="table" style="height:330.43px;width:90%;"><table class="ck-table-resized" style="background-color:rgb(255, 255, 255);border:1px solid rgb(230, 77, 77);"><colgroup><col><col></colgroup><tbody><tr><td style="border:1px solid rgb(230, 77, 77);padding:0.4em;vertical-align:top;width:50%;">Please also check out my latest design, a Long Range Dog Whistle at 7,000 Hz. Please download <a target="_blank" href="https://makerworld.com/en/models/376609" rel="nofollow noopener">here</a>.<figure class="image"><a href="https://makerworld.com/en/models/376609" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/718574/2024-03-17_9c74b40b64648.png"></a></figure></td><td style="border:1px solid rgb(230, 77, 77);padding:0.4em;vertical-align:top;width:50%;">I have also developed real Ultrasonic dog whistles at 20,000 Hz and above, which you can find <a target="_blank" href="https://makerworld.com/en/@ThreeDMichael/collections/876023" rel="nofollow noopener">here</a>.<figure class="image"><a href="https://makerworld.com/en/@ThreeDMichael/collections/876023" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/718574/2024-03-17_2788bf9fc9fc9.png"></a></figure></td></tr></tbody></table></figure>WARNING: This is a dog whistle and not a toy! It's very loud which can harm the ears, so please protect your ears and don't use it near other people or animals!&nbsp;This dog whistle produces a very loud tone of about 12 kHz. It may seem quiet to you, but that's because humans (especially in old age) perceive higher sounds less loudly or not at all - unlike many animals! Since you might not hear this high pitched dog whistle at all (depending on your age), use a freqency measuring app for testing. I use <a target="_blank" href="https://play.google.com/store/apps/details?id=org.intoorbit.spectrum" rel="nofollow noopener">this android app</a>.&nbsp;How to print:Use a line width of 0.4 mm and a layer height of 0.2 mm, 6 top layers and 6 bottom layers.Print slowly to achieve sharp edges.

12 kHz Dog Whistle

Whistles

laisch

Not another Heli launcher! But this one is different, it features an 1:9 gear System for full Power supportet by 608 ball bearings.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_kfbemrqcw9p2.gif"></figure>&nbsp;<h3>External Hardware:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_jom5dm5vfs7a.jpg"></figure>&nbsp;<h3>Assembly</h3><figure class="table"><table><thead><tr><th>Press Bearing</th></tr></thead><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_2s44d9ta405p.jpg"></figure></td></tr><tr><td>Press a 608 bearing into the hole of the middle housing. This is a tight fit, so you can use a hammer or a vice. The bearing won't slip in all the way and is about 1mm proud</td></tr></tbody></table></figure><figure class="table"><table><thead><tr><th>Heat Inserts</th></tr></thead><tbody><tr><td>Put all the M3x6 heat inserts in to their holes</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_b3ojzlxoc2y5.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_mffoe7c4sws2.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_z5ifrqqw3mjm.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_96xvwr12vxqb.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_p18tdolat6dv.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_5w9o2l3o9qzq.jpg"></figure>On the shaft heat insert it can happen that the molten material gets too proud. If the Shaft Assembly in the next step is too wobbly, sand this part if necessary.</td></tr></tbody></table></figure>&nbsp;<figure class="table"><table><thead><tr><th>Gear Assembly</th></tr></thead><tbody><tr><td>Follow this guide step by step, otherwise you won't be able to get the "Counterpart in"</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_gnmsrentoekc.jpg"></figure>press the bearing into the 30 teeth gear on the 20/30 combination gear. Don't press the other bearing in yet</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_e8vmzdrmn8ov.jpg"></figure>2. Add the shaft gear into the already pressed bearing</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_drjfx50q7dji.jpg"></figure>3. Add in the screw and the counterpart from the other side. It should be tight with no wobble. Sand if necessary</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_yw1f2ucug312.jpg"></figure>Assembled Shaft.</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_9gl6na5jf3xw.jpg"></figure>4. Now you can press the other bearing into the other side of the shaft assembly</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_drg729jiri5p.jpg"></figure>5. Press the bearing into the 10/30 Gear</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_h0lkb2w04z4v.jpg"></figure>6. Put the two gears together like shown</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_7qt441pf9kgy.jpg"></figure>7. Put the whole assembly into the midle box</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_43qblq9ozdts.jpg"></figure>8. While holding the gears in place, screw in the M3x10mm screw from the other side. This will widen the shaft and hold the Gears in place.</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_2rdr5y6lzdjv.jpg"></figure>9. To make the gears last longer, you can add some lube</td></tr></tbody></table></figure><figure class="table"><table><thead><tr><th>Final Assembly</th></tr></thead><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_fntdrlfvr79d.jpg"></figure>Screw the remaining parts together and you are done!</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_tg7imm5vo8ga.jpg"></figure></td></tr></tbody></table></figure>&nbsp;<h3>DIY Rotor</h3><figure class="table"><table><thead><tr><th>I have added the F360 file for the rotors also. If you want to design your own rotor you can change the parameters to try different stuff.</th></tr></thead><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_j2i8ymbep6ow.jpg"></figure>Always review the model after changing some parameters, sometimes the calculation can fail.</td></tr></tbody></table></figure>&nbsp;<h2>Additional models for the launcher</h2><figure class="table" style="width:100%;"><table><thead><tr><th>UFO</th></tr></thead><tbody><tr><td>A flying propeller not from this world. <a target="_blank" href="https://makerworld.com/de/models/83532" rel="nofollow noopener">>File can be downloaded here<</a><figure class="image"><a href="https://makerworld.com/de/models/83532" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-05_15b6c9c1250248.png"></a></figure></td></tr></tbody></table></figure><figure class="table"><table><thead><tr><th>MD - 500 Helicopter</th></tr></thead><tbody><tr><td>A flyable pullcopter <a target="_blank" href="https://makerworld.com/de/models/84340" rel="nofollow noopener">>File can be downloaded here<</a><figure class="image"><a href="https://makerworld.com/de/models/84340" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-05_14978c3bc34028.jpg"></a></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;<h2>INFO:</h2>When printing on the A1, there is a shorter Rack in the raw STL - files included&nbsp;&nbsp;&nbsp;<figure class="table" style="width:95.25%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><thead><tr><th colspan="3">If you like this model you may have a look at my other flying toys too</th></tr></thead><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/78262" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_2302786e89dde8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/78262" rel="nofollow noopener">Micro Sailplane</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/76104" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_eadf473572ad4.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/76104" rel="nofollow noopener">Flying Bat</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/21091" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/239530/2023-12-03_a8fc21a53267c8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/21091" rel="nofollow noopener">Cross Bow</a></td></tr></tbody></table></figure>

Overpowered Heli Launcher

Must make

Saber3D

Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;New dragons, creatures, and more released every month to my patrons, thank you for supporting my work! &nbsp;Follow our socials to see new models! <a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">Instagram</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">TikTok</a>&nbsp;This flexi dragon was designed to take less time but still give you the awesome look of a large dragon as well as make custom designs as easy as possible! Every part of this dragon can be easily painted in your slicer of choice, just make sure edge detection is turned off 😉&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Articulated Crystal Dragon by Saber3D

Articulating

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;A <a target="_blank" href="https://makerworld.com/en/models/18035#profileId-16764" rel="nofollow noopener">base/diorama builder</a> is now available for download for this mini figure model!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018045/design/4fb50df1-8c36-4d0c-88ec-bcc8e5122b9c.jpg"></figure>___________<h3>IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS</h3>Please note that I am sharing my designs to any one to enjoy but for personal use only. I have NOT provided any commercial license to any one allowing the sale of 3d printed copies of my designs. Seeing my designs being sold for profit is discouraging for me to continue coming up with more designs. I will not hesitate to report to Etsy and other online sites if I find them being sold.__________This is a kit card of Minecraft Turtle in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)<h4>Usage Options</h4><ol><li>Assemble as is and use as toy/collectible; or</li><li>Use the alternative part with loop and glue the halves together to make for a great keychain ornament!</li></ol><h4>Printing Reminders</h4><ul><li>Print as oriented, with NO supports needed.</li><li>If you&#39;re printing in multiple colors, please note that due to several color swaps, it would take longer to print.</li></ul><h4>Difficulty Level (Easy, Medium, Hard)</h4><ul><li>Printing: Medium - Bed should be leveled well to ensure small parts stick well to the build plate. Requires printing slower during the first few layers. May require lots of filament swaps if printed in multi-color.</li><li>Assembly: Easy - Parts should fit really easy. The flippers are intentionally designed to be loose and wiggly. See pictures for correct orientation of the flippers.</li></ul>

Minecraft-inspired Turtle Mini Figure Kit/Keychain

Minecraft

cyanidesugar

An oversized Charmander Pokemon card, and completely 3D printed, and print in place! This is another Hueforge hybrid print that uses filament painting methods and traditional 3D printing to create a combined pop-art effect piece. &nbsp;This took 5 hours on my Bambu Lab P1P, using 4 different filament colours with orange repeated for Charmander at the end of the print. If you do not have an AMS, no fear! Just download the 3MF file and instead of a filament change, insert a pause at the correct layer heights and manually load and unload the filament spool yourself before resuming the print. &nbsp;It is large, at 170mm x 240mm in size. If you have to resize it to fit your printer bed, please only scale the X and Y dimensions, but do not alter the Z dimension, otherwise the layer swaps will be inaccurate. &nbsp;If you are using the Makerworld One-Click printing, all settings will have been applied to this print, and you can just hit Print. If you do not want to use that, please download the 3MF file, or the STL and apply the recommended settings below.&nbsp;Print Instructions: <ol><li>The Hueforge portion of the print (0mm - 2.48mm) should be printed at 100% infill, at a 0.08mm layer height with 0.2mm base.</li><li>The Charmander (and it's tail) portion of the print (from 2.52mm to 165mm height) should be printed at 5% infill with 3 walls, 3 top and 3 bottom surfaces and at 0.16mm layer height. You can use a layer height modifier to set these settings or edit the per-object settings.</li></ol>&nbsp;Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA CC3D Orange Transmission Distance: 7.4 PLA CC3D Lemon Yellow Transmission Distance: 8 PLA Kingroon White Transmission Distance: 8&nbsp;Swap Instructions: Start with Black At 1.08mm swap to Orange At 1.64mm swap to Lemon Yellow At 1.96mm swap to White At 2.52mm swap to Orange (for the Charmander!)&nbsp;Post Processing:You'll need to paint Charmander's eyes and body yourself (I didn't, I got lazy), but that shouldn't take too much time! I suggest using a paint pen if you're finding it hard to use paint brushes!&nbsp;The Charmander STL itself was obtained from <a target="_blank" href="https://www.thingiverse.com/thing:826836" rel="nofollow noopener">here</a>, uploaded by user <a target="_blank" href="https://www.thingiverse.com/ClassyGoat" rel="nofollow noopener">ClassyGoat</a>.&nbsp;____________________________________ Commercial License to Sell PrintsIf you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my <a target="_blank" href="https://patreon.com/cyanidesugar3DP?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link" rel="nofollow noopener">Patreon</a>! ____________________________________

Oversized Charmander Pokemon Card - Hueforge Hybrid

Pokemon!

BuildyBryce

A fidget toy designed to resemble a roll of filament!&nbsp;Each side of the spool ratchets and makes a satisfying sound when spun!&nbsp;<a target="_blank" href="https://makerworld.com/en/models/43249#profileId-44451" rel="nofollow noopener">Also try my AMS Fidget Toy!</a><h2>Try Out My Other Fidget Toys!</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/43249#profileId-44451" rel="nofollow noopener">AMS Fidget</a></li><li><a target="_blank" href="https://makerworld.com/en/models/62596#profileId-65217" rel="nofollow noopener">AMS Keyring Fidget</a></li></ul><h2>Assembly Instructions</h2>Step 1: Insert the ratchet between the two halves of the spool.Step 2: Add a tiny amount of superglue onto the piece labelled below.Step 3: Insert the two inner pieces into the spool and wait for glue to set.Step 4: You&#39;re done!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061927/design/2023-11-11_269e53f535757.png"></figure>

Filament Fidget Keyring

Fidgets!

lloydliu

应网友建议，此干燥盒在上一版基础上增加了可以容纳小米温湿度计2代的槽位，方便将小米温湿度计嵌入干燥盒中，使得AMS内部更整齐美观。湿度计放置槽位顶部设有斜坡，一方面防止湿度计传感器窗口被遮挡，另一方面也便于取放湿度计。你也可以尝试放置其他尺寸在43.5x43.5x13mm以内的方形湿度计。另外，在上一版的设计中，slim版的干燥盒提手与料盘会发生干涉，在测试过程中我发现实际并不影响料盘转动，因此出于整体造型的统一就未做更改，但有网友在评论区指出了这个问题，因此还是重新修改一下提手形状以解决料盘干涉问题，模型文件随此次湿度计干燥盒一同发布。*该干燥盒适配米家蓝牙温湿度计2&nbsp;At the suggestion of netizens, this drybox has added a slot that can accommodate the Xiaomi hygrometer 2 on the basis of the previous version, which is convenient for embedding the Xiaomi hygrometer into the drybox, making the interior of AMS more neat and beautiful. There is a ramp at the top of the hygrometer placement slot, which prevents the hygrometer sensor window from being blocked on the one hand, and makes it easy to access the hygrometer on the other hand. You can also try placing other square hygrometers that are within 43.5x43.5x13mm.Besides, in the design of the previous version, the handle of the slim drybox interferes with the placement of the spool, in the test process I found that it does not actually affect the rotation of the spools, so for the sake of the overall shape of the coordination, I didn`t fix it, but some netizens pointed out this problem in the comment area, so I modify the shape of the handle to solve the problem of tray interference, and the model file is released with the hygrometer version drybox.*This drybox fits to the thermometer below: <a target="_blank" href="https://www.amazon.com/Thermometer-Hygrometer-Sensitivity-Temperature-Thermo-Hygrometer/dp/B0B1Q2MM29/ref=sr_1_1?dib=eyJ2IjoiMSJ9.qSpAH1WjLzq4TjE0Zb4CM3-PxL5tkHsQ9YveUjmLfgeNo0tNNtdeXWsD339-hy7dDc1KjKl5PfUGrxjDskK7mfDLrGMV5FRNqp57To9yOjA.PTv5DUUsMMMWYMFy2bLeZkJzdjaVMQ2F-_wFyIsuEV8&amp;dib_tag=se&amp;keywords=mijia+bluetooth+thermometer+2&amp;qid=1712113750&amp;sr=8-1" rel="nofollow noopener">https://www.amazon.com/Thermometer-Hygrometer-Sensitivity-Temperature-Thermo-Hygrometer/dp/B0B1Q2MM29/ref=sr_1_1?dib=eyJ2IjoiMSJ9.qSpAH1WjLzq4TjE0Zb4CM3-PxL5tkHsQ9YveUjmLfgeNo0tNNtdeXWsD339-hy7dDc1KjKl5PfUGrxjDskK7mfDLrGMV5FRNqp57To9yOjA.PTv5DUUsMMMWYMFy2bLeZkJzdjaVMQ2F-_wFyIsuEV8&amp;dib_tag=se&amp;keywords=mijia+bluetooth+thermometer+2&amp;qid=1712113750&amp;sr=8-1</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/807006/2024-04-03_9b9a3d4ad0df6.png"></figure>

小米蓝牙湿度计干燥盒 Drybox for AMS with Xiaomi hygrometer 2

3D printer accessories 

rostap

<h3>Arm mounting system </h3>It is a universal set of holders and arms. You can use this system as a notebook holder, tablet holder, monitor holder, camera or any other device holder or you can have it as a shelf holder.If you print a pair, you can made various tables.You can attach more arms togehter. I made some connecting parts and other accessories. There are no limits to imagination. I made it with increased strength and durability. If you add few perimeters the holders/arms can hold pretty good weight. &nbsp;&nbsp;&nbsp;Small light versionHolders reduced x 0.6 and then adjusted (hole sizes, gaps, etc.)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_ygt4l1gyz0rx.jpg"></figure><h4>Základní informace</h4><figure class="table"><table><tbody><tr><td>&nbsp;<figure class="image image_resized image-style-align-left" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_1vuk35qftkm3.jpg"></figure>&nbsp;</td><td>&nbsp;You can adjust the angle in ten degrees. Screw and nut fit on both sides. &nbsp;&nbsp;&nbsp;</td></tr><tr><td>You can tight and loose from both sides no matter where the nut is. </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_5bbkp2ve4kgr.jpg"></figure></td></tr><tr><td><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_l4f3cs4r4hsf.jpg"></figure></td><td>There are various nuts and screws. Of of them counts with the allen screw (hex bolt) M8x40&nbsp;</td></tr><tr><td>You can also print the crew which can be tight and loose without gear- with the printed hex bolt screw. </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_7dyjbvq16pqm.jpg"></figure></td></tr><tr><td><img src="https://media.printables.com/media/prints/165239/rich_content/5d2096ce-0223-4834-ade9-1fd6b3aec194/resize_img_6432.jpg#%7B%22uuid%22%3A%2292583698-0623-4e34-94da-bb853c30ae47%22%2C%22w%22%3A2016%2C%22h%22%3A1512%7D"> <img src="https://media.printables.com/media/prints/165239/rich_content/4dd49cb0-b7a2-4690-8a96-9c03407d2c2e/resize_img_6427.jpg#%7B%22uuid%22%3A%225c571a00-83c6-45bf-a6bb-97f04a44ed33%22%2C%22w%22%3A2016%2C%22h%22%3A1512%7D"></td><td>The holes for key in the screw and two arms have the same size as the holders in Honeycomb storage wall (https://www.printables.com/cs/model/152592-honeycomb-storage-wall). That means that you can hang different accessories on the arms. </td></tr><tr><td>There are various of arms. </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_bdrw6oh1oh1y.png"></figure></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_u06b8t58ztlv.jpg"></figure></td><td>ClampI made 3 different types - <ol><li>for the screw M5/M6 mounting spacing for holders 30x30mm</li><li>for the screw M5/M6 mounting spacing for holders 40x40mm</li><li>for the screw M5 mounting spacing for holders 40x40mm</li></ol>&nbsp;</td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_t3u1ipn1agdd.jpg"></figure></td><td>VESA rotating holder - 75mm</td></tr><tr><td>Combination for possitioning along the axis Z<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_7m1sfrwcw20k.jpg"></figure>&nbsp;&nbsp;</td><td>System - high table for tablet holder <img src="https://media.printables.com/media/prints/165239/rich_content/228c6e5e-a2a4-41ce-a79e-962f4006c973/resize_img_6430.jpg#%7B%22uuid%22%3A%22da81a7de-4dd3-453e-96dc-6c179e6bc32e%22%2C%22w%22%3A1512%2C%22h%22%3A2016%7D"></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_11nh0grq3czm.jpg"></figure></td><td>There are holders for three tablets. Bottom width<ol><li>196 mm</li><li>250 mm</li><li>305 mm</li></ol>screw spacing 30mm</td></tr></tbody></table></figure><h4>Basic arms</h4>The only difference is the grid<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_0qsfmal86eys.png"></figure>&nbsp;<h3>Holders</h3>A few basic handles<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_wjg38olir4sz.png"></figure>&nbsp;<h4> </h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_ej2zf1avpe73.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_2ujybj6hyhzb.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/181205/2023-09-26_3i0br0eesaay.png"></figure>&nbsp;I printed small parts on the Prusa Mini, the arms on the Ender 3.&nbsp;My printing settings<ul><li>material: PETG</li><li>perimeters: 8 and more</li><li>infill : 30% and more</li><li>layer height 0.3 (with nozzle 0.6 layer height 0.4) (screw and nuts only 0.2mm layer height) </li></ul>&nbsp;

Multifunction Arm mounting system

Useful work stuff

BrandedAbstract3D

<h3>Model</h3>Drinks coaster set designed to resemble Brembo Racing Brakes, unique and functional, great for any workshop, desk, or garage. It's a great conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings.&nbsp;To complete the phone holder you'll need:<ul><li>1 x Caliper (printable)</li><li>4 x Brake Discs (printable)</li><li>4 x Display Screws (printable)</li><li>1 x Brembo Vanity Plate (printable)</li></ul><h3>Print Settings</h3>I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I'm a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I've had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls and top layers to around 50mm/s seems best.&nbsp;<ul><li>Caliper: Use a 15% rectilinear infill—it's sturdy enough to hold all four of the coasters. And, I set the seam position to “back”. Essentially can't see any of the seams from the front.</li><li>Brake Disc: Gone for a 5% infill, saving print time. I also read that a lot of the thermal transfer gets stopped by air so the more holes in the coaster the better (especially when using hot drinks) so I figured less infill could = less melted PLA. From the PLA I've used hot drinks work great on these coasters, the contact patch between the coaster and the cup/glass is actually remarkably small and hasn't melted anything at all! The bottom surface pattern is concentric to give it that super-consistent smooth look and the top layer is Archemedian Chords I find this gives the discs a nice partially worn look.</li><li>Display Screws: Use a 15% infill. This part is mostly for show and serves no real use other than aesthetics. I use a standard PEI Plate and haven't had a problem with them being knocked over while printing. If you do I'd suggest using a brim and that'll fix that issue.</li><li>Brembo Vanity Plate: There are two Brembo branded plates that you can stick on to the caliper. You can use CA glue to attach it, and it'll work perfectly. One plate has the Brembo logo upside down, simulating how it would be on an actual brake caliper. The other plate is right side up, making it easier to read the branding when the coaster is on your desk.</li></ul>Assembly is straightforward; you can easily get it from the photos. Insert the display screws into the holes, adding a dab of glue before inserting them. Apply some glue to the Vanity Plate and attach it to the front; it's super simple to align.&nbsp;Happy Printing!

Brembo Drinks Coaster Set

Decor

ArchiAle

<h2>A collection of funny signs for your home. Collect them all!</h2>Powered by Make My Sign from MakerWorld (makerworld.com/makerlab/MakeMySign)

[HC] Bathroom Sign 01

Signs

wuguigui

<h2>Summary</h2>Updated 20230615 Someone said the "1.1 Part-Shell-Front" is too tight to insert into the body, so I modified it, you can try the new part now.Updated 20230605I separated the body into 2 parts, now it is available for small printers( print size less than 10X10X10cm)Also, I removed the nostril, because, in the early TV cartoon series, they don't have any nostrils on the face; The front shell and the front body parts have a snap groove now， which can help you to assemble them easily.But I kept the old version, you can download the new version parts with the title "1.1"Updated 20230530Sorry guys, someone has an issue when assembling the part"Part-Shell-Front" to the body, Then I found the part is wrong, and now I reupload the part"Part-Shell-Front", Please download it again.Teenage Mutant Ninja Turtles, the memorial of the Post-80s generation.I designed a model kit version of the four cute turtles, It imitated the frame structure of the model kits, can prevent edge warping during printing, and can also recall the fun of assembling the model kit. Most of the sprues adopt hidden designs.You can try to print it with no support, 0.1 mm layer height is recommended.Follow the "Assembly Instructions" to make it. Watch the video to get more information.You can get the fun from the assembling.Click "Like" if you like it, or <a target="_blank" href="https://paypal.me/wuguigui?country.x=C2&locale.x=zh_XC" rel="nofollow noopener">buy me a cup of coffee</a> thank you!<h2>Post-Printing</h2><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=KjEl-mLZMsw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/KjEl-mLZMsw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>