WhosZachh

Jandaa

Take your NFL fandom to the next level with 3D printed Brick Men awesomeness!Brick Men colours based off the Color Uniforms, can be changed if you like different colors&nbsp;Brick Man Height approx: 20cm/8inches&nbsp;Showcase your team spirit with unique and durable 3D printed creations Features: 3D printed NFL team logo Player figurines Intricate details and accurate designs - Get your 3D printed NFL gear today and score big with your friends and fellow fans!&nbsp;Filament used:PLA Basic Black (Bambulab)PLA Basic Red (Bambulab)PLA Basic Jade White (Bambulab)PLA Basic Yellow (Bambulab)PLA Basic Gold (Bambulab)&nbsp;Printing Details and directions:Logo Printing recommendation is .2mm Standard with ARACHNE wall generator All other parts can be printed at .20mm with classic wall generator.Supports are only required for the ARMs (plate 2) and HIP (plate 3) depending on your setting and adhesion level I would recommend a brim on the hands and arms&nbsp;You will need to glue the logo into place after printing it was designed this way to try to have as little poop waste as possible.&nbsp;Additional:Alternate leg designs and colors - Coming Soon

NFL Brick Man - Kansas City Chiefs (500%)

lego

Xander Designs

Update New files uploaded to separate print profile - 0123456789 ? ! @ # &amp;Welcome to our set of English Alphabet Sand Molds!Each letter is carefully crafted and saved on individual plates for effortless printing.Whether you want to spell out your name or leave a cheeky message for passersby, these molds have you covered.Standing at 10cm tall and 5cm deep, you can easily scale them up to fit your printer&#39;s size.With a sturdy 2mm thickness, they are built to last.Plus, the 3-degree Draft design ensures easy release of sand.Tested on builders sand, these molds are guaranteed to give you perfect results every time.

Alphabet & Numbers Sand Molds

beach

jr2142

Reshare of the awesome <a target="_blank" href="https://www.thingiverse.com/thing:5683322" rel="nofollow noopener">Minecraft Grass Block Container</a> from <a target="_blank" href="https://www.thingiverse.com/bcaron/designs" rel="nofollow noopener">BCaron</a>. Check out the <a target="_blank" href="https://www.thingiverse.com/thing:5683322" rel="nofollow noopener">link</a> for details.&nbsp;&nbsp;

Minecraft Grass Block Container

bubba

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #17 (1.44mm) swap to Grey At layer #23 (1.92mm) swap to White for the rest.

Moon Couple Hueforge

HueForge

Brandido02

The rims and center ring are straight from Bambu's spool. And interchangeable with it. It is designed for Bambu's refill spools. But I have found that Elegoo spools also fit perfectly on it. Also Overture and Polymaker spools fit but are a bit loose, but they fit perfectly over the center rings of Bambu and Elegoo spools. So, I use them as spacers. Let me know if you try it with any other brands!I recommend PLA because it is a lot stiffer than PETG.&nbsp;03/24/23 - I've got multiple requests, so I uploaded a version 2.3 and 3.3 that remove the little notch on the inner ring. I left print profiles with versions 2.2 and 3.2 that still have the notch for Bambu spools. Note, I think the notch is important because it locks the cardboard inner ring so it doesn't spin free of the spool. &nbsp;12/14/23 - WOW 7K Downloads!!! Some folks asked for a filament scale, Soooo here is v2.2 and v3.2!!! The left side of both have a filament scale. The right side is unchanged.&nbsp;11/19/23 - Here is v2.1 and v3.1!!! The only difference is I added a 2mm hole in the Left side of the center ring for filament to be inserted when respooling. Though respooling isn't what I usually do. I actually have found that the cardboard center of other spools fit right over the center of this spool. Specifically, Elegoo fits perfectly. you just need to nip out a little notch. I have also done it with Overture and Polymaker. but their center rings are a little bigger and so are a bit loose. But, the center ring of an overture spool fits snugly right over the center ring of an Elegoo spool, which fits snugly over the center ring of this Bambu spool!&nbsp;10/19/23 - Wow! 3K downloads! Here is Version 3! it uses less filament and takes less time. But it may not be as strong. I have been testing it now for a couple weeks without any problems.&nbsp;9/29/23 - Uploaded v2. I completely remade the spool using Bambu's newest spool. The rims are completely smooth now.&nbsp;Here is a remix of Bambu's Filament spool but with hexagons to use far less filament without sacrificing strength.The rim filament holes are also angled so as not to introduce a sharp bend into the filament. Also, there are more of them around the rim.This is interchangeable with the original Bambu rims.&nbsp;Note: the spacing shim goes on the inside of the spool to lock the two halves together. Though I haven't needed it because they lock together pretty tight. But Bambu recommends it, so I included it.&nbsp;Why hexagons? Because hexagons are the best-agons!&nbsp;Notice: Print profiles NOT created by Brandido02 may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control over these third-party print profiles.

Bambu Reusable Hex Spool

roll

MELS 3D LABS

Rattleshark by Mels3DThere's a keychain ring area on the tail section where you can attach keyring.Check out Mels 3D LABS on socials for latest models!  https://www.instagram.com/mels3d  For commercial license, check out the patreon.  https://www.patreon.com/mels3d

RATTLESHARK

zach

Fin3dPrinting

This is a Flower Stanley Straw cover. This is a quick print and fits on a Stanley perfectly!I recommend switching the color swap for the multicolor version to 800 for the transfer from the color of the flower to the color of the middle of it<figure class="image image_resized" style="width:22.22%;"><img src="https://makerworld.bblmw.com/makerworld/draft/789669/2024-03-30_37fa10dd7468.png"></figure>Settings-PLA OR PETG (PETG recommended)Supports- Yes, Tree, 30, Organic (all other boxed not checked)Brim- NoInfill- Anything (one on the picture is 15%)Good Luck!&nbsp;Check out my shop at <a target="_blank" href="https://fin3dprinting.etsy.com/" rel="nofollow noopener">https://fin3dprinting.etsy.com</a>see my YouTube channel at <a target="_blank" href="https://www.youtube.com/channel/UCr6vlDZr5RTa7Ya1-jMhi8w" rel="nofollow noopener">https://www.youtube.com/channel/UCr6vlDZr5RTa7Ya1-jMhi8w</a>

lego

beach

bubba

HueForge

roll

zach

Megan