Westersund Design silica drying container made out of ABS to be able to dry at 70 degrees C in most filament dryers, 2 different lids (one with a funnel) with 360 degree symmetric locking. Suitable for silica with a diameter or 2 mm and above.

Zip tie anchor made to be installed with 25 mm/1" wide double sided tape for securing/installing cables among other things using a zip tie.

The safe SD-Card storage (keychain) with locking mechanism and recessed slots for ease of removal of the SD-Cards. Can contain 4x Micro SD-Cards. Prints perfect with a 0.4 nozzle, 0.6 nozzle works well but small details of the logo might not be perfect.

The safe SD-Card storage (keychain) with locking mechanism and recessed slots for ease of removal of the SD-Cards. Can contain 1x SD-Cards/-Adapters and 4x Micro SD-Cards.

Westersund Motorsport radius gauge set including both inner and outer radius 1-50 mm no skip presented in a sleek and minimalistic box in black and white.

The safe SD-Card storage (keychain) with locking mechanism and recessed slots for ease of removal of the SD-Cards. Can contain 2x SD-Cards/-Adapters and 8x Micro SD-Cards.

Silica Container made for all Bambu Lab filament spools. Very low profile which means that the spool can lay flat even with the container installed, fits nice and snug against the spool. AMS and filament drier SAFE!

Tired of using the included shaft to release the pressure on your hydraulic press? So was I...

Got moisture trapped in your BMW F10/F11 headlight? This is a temporary fix that will buy you some time!