Dog Tag Design

LordBoos

Necromancer (Filament Painting) - HueForge<h4>Printing instructions:</h4>Filament swaps ONLY, no MMU or AMS required, but AMS makes it much easier.Use Original HueForge profile to get the intended look, my models are very sensitive to print settings because of color blending between layers. Every setting and filament changes for AMS are carefully prepared and fine-tuned in the Original HueForge print profile, feel free to change colors, but I recommend not to adjust other settings. If you want to experiment with your own settings or non-original print profiles, for best look print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm.You can use same filaments as I did, or you can experiment with your own.Don't forget to upload a make!&nbsp;<h4>Filaments Used:</h4><ul><li>PLA BambuLab Basic Black Transmission Distance: 0.6</li><li>PLA BambuLab Basic Blue Gray Transmission Distance: 3</li><li>PLA BambuLab Basic Beige Transmission Distance: 8</li><li>PLA BambuLab Basic Jade White Transmission Distance: 4</li></ul><h4>Swap Instructions:</h4><ul><li>Start with Black</li><li>At layer #7 (0.48mm) swap to Blue Gray</li><li>At layer #13 (0.72mm) swap to Beige</li><li>At layer #29 (1.36mm) swap to Jade White for the rest.</li></ul>

Necromancer (Filament Painting) - HueForge

mrlebl0nd71

Je vous partage ma création, cadre pour mon écran X1C + porte-outils&nbsp;Le fait qu&#39;il soit possible de le bouger me déplaisait. Il est maintenant fixé vers le haut.Il est volontairement moins long sur la partie supérieure pour permettre le passage de mon riser.Le modèle a été réalisé en collant une bande double face 3M sur la partie prévue à cet effet.&nbsp;Si le modèle demande des modifications, merci de me les communiquer.&nbsp;Je ne suis pas professionnel et je réalise cette pièce par plaisir.&nbsp;Remarque : Le débit doit impérativement être calibré et le filament séché pour de meilleur resultatRemarque 2: l&#39;accès a la carte sd est supprimé?&nbsp;&nbsp;Merci d&#39;avoir téléchargé mon modèle. I share with you my creation, frame for my X1C screen + tool holder&nbsp;I didn&#39;t like the fact that it was possible to move it. It is now fixed upwards.It is deliberately shorter on the upper part to allow the passage of my riser. The model was made by sticking a 3M double-sided tape on the part provided for this purpose.If the model requires modifications, please let me know.&nbsp;I am not professional and I make this piece for pleasure.Note: The flow rate must be calibrated and the filament dried for best resultsNote 2: access to the SD card is removed?&nbsp;Thank you for downloading my pattern.

X1C Screen Bezel + tool holder

MinimalistGaming

Compatible with 3RD EDITION (THE NEWEST ONE released in 2022), Warewolf expansion, and Yuletide expansion! For all those pesky fiddley bits in Betrayal... Organize them using this token & card organizer that fit perfectly in the box!&nbsp;Designed for the Betrayal at House on the Hill 3rd Edition, The Warewolf's Journey Blood on the Moon Expansion, and The Yuletide Tale Evil Reigns in the Wynter's Pale. Everything fits in the core box with the original plastic insert. Using this insert still allows the box lid to fully close. &nbsp;Core game minis remain in their original slots. The Warewolf minis go in the rectangular token tray. The Yuletide minis are placed as shown in the pictures. &nbsp;Token Trays: These fit all the cardboard tokens and slot right into the original plastic insert. This makes setup, teardown, and finding the right tile during the game MUCH faster!&nbsp;Card Tray: This fits all cards (events, items, and omens, plus the reference and other cards). During storage, all cards lay in the flat section. During gameplay, the draw piles can be inserted in the diagonal slots, providing convenient draw and discard piles. During storage, this goes where the manuals would go. The manuals go on top of the card tray and the lid still closes fully. --> This will not work with sleeves

Betrayal at House on the Hill 3RD EDITION Organizer

game stuff

Tomáš Zatloukal

The model do have 20 joints + a joint with legs + a head + a tail.

ARTICULATED GHOST DRAGON

kiddos

Maker1O1

Flexi-Facehugger orignally made by OneIdMONstr and licensed under CC BY-NCRemixed for AMS by me.

Flexi Facehugger Xenomorph Alien VS Predator Articulated flexible print in place

Aliumz

PixelDotGra.FX

I was requested by family members to make them some cool looking koozies for get togethers. Found MandicReally's grenade 12oz can koozie design on Thangs and absolutely loved it. But I also wanted to make each koozie different for each family member who requested one. So I created a slot on the side of the original design to be able to fit a round badge matching their branch of service. They fit very snuggly so may need some sanding and working with. I used glue but honestly, they're so snug it felt like overkill. I did it this way so that it looks clean when done. I do plan on creating more badges to fit into the koozie. If you have suggestions on what others you'd like to see, just leave it in the comments and I'll see what I can do when I have time. I originally printed these with an Ender 3 S1 and just changed the filament based on layer height. So it's totally doable to make these in multi-color without the AMS.

Grenade Can Koozie REMIX with Military Badges

stuffz

Williams Industries

Had a client want some Jeep themed keychains. Check out the Jeep grill ones as well. There are 3 plates in total. One plate has both versions where the grill is colored in and the other is without the grill colored in. The other 2 plates are the individual ones.&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>

Not Jeep Duck Keychain

Jeep Stuff

Tommy Gun

Amazing work by <a target="_blank" href="https://makerworld.com/en/u/1773599049" rel="nofollow noopener">JAV-3D</a> Please give him a follow !!! Check his work out !&nbsp;Always trying to save on filament !!!! Needed to pass and remix this amazing design for good mesure !!!&nbsp;Tight fit and slides perfectly to accomodate spools with bigger middle hole ! (yes its does slides :P)&nbsp;Print faster, uses less filaments !!! does not loose any strenght overall&nbsp;Enjoy !!

hue

X1C

game stuff

kiddos

Aliumz

stuffz

Jeep Stuff

bambu stuff