Wachael

Joshua.b.s

Printing 1 Croc charm at a time is way to slow.Just print 30 at a time!&nbsp;Supports not needed.

30-Pack Rock Croc charms (No Supports)

Crocs

binprint

Best MOM in the Galaxy - Star Wars Sign

Mother's and Father's Day

Raynors_Workshop

This print is designed to be printed using a .2mm nozzle with a single AMS unit. The layers are designed to be printed at .14 in order to let lower layers come through and blend to achieve the look of more than 4 colours. 4 filaments used in the photo - Bambu white PLA basic Bambu black PLA basic eSun bone white PLA+ eSun light blue PLA+ The print profile states 2 hours 15 minutes to print. I can assure you, that's not needed! Print at ludicrous speed (trust me on this) and it will shave off 44%, bringing it down to a more manageable 70(ish) minutes. The printer works perfectly well on a .2mm nozzle at ludicrous speed. The coaster print in the photo was printed using this speed setting. I can't wait to make more designs that use filament shading! Enjoy printing!

Heeler's Gym Coaster (SINGLE AMS!)

Bluey!

KNDesign

<h3>Thwomp Mario Dice Model</h3>One of Mario’s iconic Monsters has now transformed into a dice!Recommend using a .2mm nozzle for high quality thwomp face.&nbsp;The number of teeth represents the die sides.<img src="https://makerworld.bblmw.com/makerworld/draft/787325/2024-03-23_f05da3c32ac63.png">&nbsp;Requirement:<ul><li>Super Glue</li></ul>Assembly Instruction: Dice ConstructionGeneral Rule: Ensure that the sum of the numbers on opposing sides equals 7.Example:<ul><li>1 + 6</li><li>2 + 5</li><li>3 + 4</li></ul>Assembly Steps:<ol><li>Apply super glue to the surface with the number 1.</li><li>Flip the dice and affix the number 6 to the opposite side, ensuring a total sum of 7.</li><li>Repeat step 1 to 2 for the next set of numbers</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/787325/2024-03-23_04cf0c014d48d.jpg"></figure>&nbsp;&nbsp;

Thwomp Mario Dice

Super Mario Universe

Darkwing

remix of existing model but with new base that allows for magnet to be put underneath&nbsp;&nbsp;&nbsp;<figure class="table" style="width:98.39%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><thead><tr><th style="background-color:hsl(120, 75%, 60%);border-style:solid;text-align:center;" colspan="3">My DnD miniatures</th></tr></thead><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/188800#profileId-231382" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-03-16_4d665844808b48.jpg"></a><figcaption>Character Pack 1</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/168509#profileId-185972" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-03-16_e9c136d2d34068.jpg"></a><figcaption>Character Pack 2</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/371953#profileId-271898" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-03-16_bd4fd52310095.jpg"></a><figcaption>Character Pack 3</figcaption></figure></td></tr><tr><td><figure class="image image_resized" style="width:78.79%;"><a href="https://makerworld.com/en/models/243075#profileId-259335" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-03-10_3554d3b30878f.png"></a><figcaption>Spiritual Weapons</figcaption></figure>&nbsp;</td><td><figure class="image"><a href="https://makerworld.com/en/models/182742#profileId-201292" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-02-14_cd9489997013e8.jpg"></a><figcaption>Owlbear Cub</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/401307#profileId-302802" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-03-29_8e284434858cd8.jpg"></a><figcaption>Druid tribesman</figcaption></figure></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/151979#profileId-166046" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-01-29_42e12958751058.png"></a><figcaption>Fire Elemental</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/153634#profileId-167876" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-01-25_c7433ed7baa43.gif"></a><figcaption>Mimic</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/147207#profileId-160643" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-01-21_ae1a3e233a56.jpg"></a><figcaption>Miniature storage</figcaption></figure></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/81029#profileId-95256" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-01-15_eb2aac9149b788.png"></a><figcaption>Warforged Artificer\Sorcerer</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/155960#profileId-170777" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-01-29_30891d8e4b38c8.jpg"></a><figcaption>Dwarf with warhammer</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/166273#profileId-183344" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-02-14_b91202b4d00658.jpg"></a><figcaption>Kraken</figcaption></figure></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/119363#profileId-133078" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-01-15_182bc37d1f4cc.png"></a><figcaption>Human Militia</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/120872#profileId-142633" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-01-23_4ceab0a5a6a958.gif"></a><figcaption>Warforged fighter</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/147060" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-01-19_4d9fdb8600515.png"></a><figcaption>Elf Archer</figcaption></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-01-15_c6d2753a8ff5f8.jpg"><figcaption>Ice Dragonborn</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/401316#profileId-302814" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-01-15_233d542c4ddf6.png"></a><figcaption>Owlbear</figcaption></figure></td><td><figure class="image image_resized" style="width:76.08%;"><a href="https://makerworld.com/en/models/119381#profileId-134535" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/412472/2024-01-15_e31e623d6fa24.jpg"></a><figcaption>Paladin</figcaption></figure></td></tr><tr><td style="background-color:hsl(120, 75%, 60%);border-style:solid;text-align:center;" colspan="3"><h2><a target="_blank" href="https://makerworld.com/en/u/668400532" rel="nofollow noopener">All my models</a></h2></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Statue dnd mini

Dungeons & Dragons

BrickSaberBuilder

This Life Sized Lego Revolver shoots real nerf bullets. Its a fun twist on a classic Lego toy. Its a great way to bring a boring blaster to life. Use it on friends, family, co-workers, or keep it on your desk as a simple ornament. Uses the NERF Elite 2.0 Ace SD-1 Blaster linked here: <a target="_blank" href="https://www.amazon.com/NERF-Blaster-Official-Stealth-Sized-Pull-Down/dp/B09H242KPM/ref=sr_1_57?crid=2EVYDDIVQ354K&keywords=nerf+elite+blaster&qid=1705511505&sprefix=nerf+elite+blaster%2Caps%2C84&sr=8-57" rel="nofollow noopener">https://www.amazon.com/NERF-Blaster-Official-Stealth-Sized-Pull-Down/dp/B09H242KPM/ref=sr_1_57?crid=2EVYDDIVQ354K&keywords=nerf+elite+blaster&qid=1705511505&sprefix=nerf+elite+blaster%2Caps%2C84&sr=8-57</a>&nbsp;<h3>Assembly Instructions:</h3><h4> You will need to purchase the blaster linked above to make it functional</h4><ol><li> You will need to strip away the blue outer shell and trim the bottom to make it fit in the blaster as seen below:</li></ol><figure class="image image_resized" style="width:30.83%;"><img src="https://makerworld.bblmw.com/makerworld/draft/435953/2024-01-17_2c64f0afdfa16.png"></figure> 3. Then simply insert it into one of the half sides of the blaster:<figure class="image image_resized" style="width:36.08%;"><img src="https://makerworld.bblmw.com/makerworld/draft/435953/2024-01-17_9f6aea8b91523.png"></figure> 4. Insert the 5 pins onto the barrel and the other half side of the blaster:<figure class="image image_resized" style="width:53.82%;"><img src="https://makerworld.bblmw.com/makerworld/draft/435953/2024-01-17_e374c16f78c94.png"></figure> 5. Press the 2 half sides together:<figure class="image image_resized" style="width:30.81%;"><img src="https://makerworld.bblmw.com/makerworld/draft/435953/2024-01-17_463351db3702d.png"></figure> 6. Press on the barrel making sure the 3rd hole lines up so Nerf bullet can travel through. Also make sure the notches on the barrel are in line with the notches on the handle:<figure class="image image_resized" style="width:58.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/435953/2024-01-17_8e371e99818e4.png"></figure>

Working Life Sized Lego Revolver (Shoots NERF Bullets)

NERF

mipmay3D

San Francisco 49rs Coaster. Coaster is 95mm diameter, 4mm thick. Print on textured plate face down. 0.4 nozzle, Wall generation Arachne, PLA, AMS. NOTE: I do not own the rights to the logo in this model, and it is designed as fan art. This is not intended for commercial use.

San Francisco 49ers Coaster

Football

zymes_dk

Printable on Prusa Mini/Bambu A1 Mini size printers and up. Files is named _NoSupport or _TreeSupport. :)

Battle Droid (Star Wars)

Cosplay

Jacklove

Joining the MakerWorld family for the first time, I am very happy to share my first model with everyone. I hope you like it and can also provide your opinions or suggestions on this model for my future improvement.

Balloon dog

3D Prints This Week

Load gray and white into ams (or any color combo).&nbsp;&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)

Lego Sign / Funny Wall Art / 2d art

Signs

Grumpy Ol Vet Printing

Chicken Sign&nbsp;Printed using an AMS

Chicken Sign

Chickens

Just a sign based off of so many others.

Join the Dark Side. We have 3D Printers.

Star Wars

MadMax3D

I love making lithophanes because they are colorful and easy to print. For best viewing, they need a brighter light than one tealight can provide. I designed a display system that can use up to 3 tealights or a USB light stick. The top of the display case lifts off easily to change out the hexaphane slides. The storage rack on the back of the case has room for six additional slides. &nbsp;Update - I added a new top frame with no tealight holes to the “display case only” profile (also as stl in the download section). Use this top if not using tealights and only using the USB stick light.&nbsp;<a target="_blank" href="https://makerworld.com/en/u/2612385699/collections/54109" rel="nofollow noopener">More Hexaphane Themes</a>&nbsp;<a target="_blank" href="https://www.amazon.com/PATIKIL-Portable-Reading-Sleeping-Camping/dp/B0BBQ3B8Y7/ref=sr_1_9?crid=3UE8G2JC9CNKG&keywords=usb%2Bstick%2Blight&qid=1697841206&s=hi&sprefix=usb%2Bstick%2Blight%2Ctools%2C88&sr=1-9&th=1" rel="nofollow noopener">USB Light</a><a target="_blank" href="https://www.amazon.com/gp/product/B08FM3ZQ27/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1" rel="nofollow noopener">USB Extender Cables</a>&nbsp;Printing Instructions&nbsp;A multi-material printing system is strongly suggested. There are 16 color changes for each slide. I have provided two .3MF files for Bambu Studio; one with the display case only and the other with all five lithophanes for easy printing on Bambu Labs printers. For other slicers, there are several steps required to generate the hex shape. Each lithophane was created at <a target="_blank" href="https://lithophanemaker.com/Color%20Lithophane.html" rel="nofollow noopener">Lithophanemaker.com</a> using these settings:&nbsp;Lithophane Resolution: 0.2 Colored Resolution: 0.8 Layer Height: 0.1 Width: 115 Maximum Thickness: 2.5 Minimum Thickness: 0.8 Height: 115.00 First Layer Height: 0.2 Filaments for Color Palette: Printed Solid CMYK&nbsp;This generates a 115mm square lithophane. You can generate your own 115m square lithophane using these settings and create the hex shape using the procedure below. Use the “Hex Mask” stl to create a negative volume object on top of the lithophane.<ul><li>Slicer set for .1mm layer height. .2mm on first layer. 100% infill</li><li>Load the 5 .stls for one of the lithophanes as a single object with multiple parts.</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140420/2023-10-20_3r4ei1qnttat.png"></figure><ul><li>Assign the colors to each part of the assembly</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140420/2023-10-20_9s4sq841cadu.png"></figure><ul><li>Drag the “hex mask” stl onto the plate and center it over the lithophane</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140420/2023-10-20_df68xoyrtgug.png"></figure><ul><li>Select all the objects and assemble the mask to the lithophane</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140420/2023-10-20_ux014lw0znz2.png"></figure><ul><li>Convert the hex mask object to a negative part</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140420/2023-10-20_n8s1e09hgqu2.png"></figure><ul><li>When sliced, it will create a hexagonal lithophane with a .6mm border to slide into the display case and rack</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140420/2023-10-20_gkifhl7f1ol0.png"></figure>I used the following IIIDMax PLA+ colors, but you can use similar colors from any manufacturer.<figure class="table"><table><thead><tr><th>IIIDMax Colors</th><th>RGB</th><th>Hex</th></tr></thead><tbody><tr><th>White</th><td>231,231,224</td><td>#e7e7e0</td></tr><tr><th>Yellow</th><td>246,196,45</td><td>#f6c42d</td></tr><tr><th>Light Blue</th><td>34,155,213</td><td>#229bd5</td></tr><tr><th>Fuchsia</th><td>162,70,141</td><td>#a2468d</td></tr></tbody></table></figure>&nbsp;

"Hexaphane" Display System With Halloween Scenes

Halloween

Matthew Cunningham

Take your Legos on the go with this Lego Build and Go Cup that fits in most car cup holders! Made this for my youngest who is big into Legos right now and wanted something he could take with us. Nice item to keep him occupied out and about. I made the one in the pictures from <a href="https://www.amazon.com/gp/product/B081Q78248/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow">eSUN Silk Rainbow Metal PLA</a> and <a href="https://www.amazon.com/gp/product/B07FQGFRDS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow">Fire Engine Red eSUN PLA+</a>. Printed on a Bambu X1-Carbon. Hope everyone enjoys the print!

Lego Build and Go

LEGO

Encrust3d

I wanted the Khonshu totem on the Ammit base. The Ammit base is also remixed to remove an overhang in the front left bottom corner crack so there is no need for a small support on the base. Supports are needed for the top half and only the front cloth on the bottom half