Say goodbye to stale chips and soggy snacks!

⚠️ WARNING: Use ONLY battery-operated (LED) tealights. Do not use open flames to avoid melting the plastic and fire hazards! The model prints easily in two separate pieces. For optimal results, print the base with a dark grey, black, or metallic filament to simulate heavy metal, and use a white or translucent PLA for the top part to softly diffuse the LED light.

The files print flat in no time and without any need for supports. To achieve a super realistic effect reminiscent of carved leather or wood, we highly recommend using Matte PLA or Wood PLA filaments in warm tones. Assembly requires only a cord for the pendant and hooks for the earrings. Create your custom look in just a few minutes!

The models print flat in just a few minutes with no supports needed. To achieve the magnificent organic effect shown in the photos, I highly recommend using wood-filled filaments (Wood PLA) or matte PLA in earth tones. To complete the set, simply add basic metal jump rings, earring hooks, and a leather cord for the necklace.

The model has been specifically designed to look its best with multicolor printing (AMS/MMU), allowing you to achieve crisp lettering and perfect contrasts without having to paint anything by hand. It prints easily flat on the bed and requires absolutely no supports. The board's slots are calibrated to perfectly hold the tokens. A great gift idea for any Pokémon trainer!

As with the original model, the box includes a secure snap closure to keep the pieces organized. The paw prints are perfect for multicolor printing (AMS/MMU) to make the white pads pop against colorful backgrounds, like the cute orange and blue tokens seen in the photo. Very easy print, zero supports required. A fantastic and quick-to-print gift idea for kids or pet owners!

The box prints easily and includes a convenient snap closure so you don't lose the pieces. The two-tone tokens (in the photo showing a vibrant orange and blue contrast) fit perfectly into the compartments. This is a support-free project and is perfect for using up leftover colored filament for the game pieces. A great gift idea or a highly useful gadget to always keep in your backpack or car glovebox!

The model is designed to be easily printed flat on the bed. You can use AMS/MMU or print the parts separately to achieve the beautiful two-tone effect of the dark frame with the light insert. The small vase requires no supports and is intended for lightweight decorations. Attach it securely to the wall with strong double-sided tape (e.g., 3M VHB) and start connecting the modules to make your design "honeycomb" bloom!

The design prints easily flat on the bed, and is optimized for multicolor printing (AMS/MMU) to create a strong contrast between the dark hexagonal frame and the light insert. The glasses support is sturdy and requires no print supports. Mount it to the wall with high-quality double-sided tape (e.g., 3M VHB) or adhesive pads and start linking the various modules together to create your custom "honeycomb".

The model prints easily flat on the bed. You can use AMS/MMU to create the magnificent color contrast between the dark frame and the light interior. The solid protruding central peg is perfect for safely holding even the heaviest keyrings. It is highly recommended to mount it securely to the wall using strong double-sided tape (like 3M VHB). Have fun building your own design "honeycomb"!

This vertical catchall is solid and spacious, ideal for organizing your EDC (Everyday Carry). Depending on the chosen orientation on the build plate, you might need supports for the shelf or the pegs. Printing in PLA or PETG with a good number of wall loops is highly recommended to ensure sturdiness. Mount it to the wall with strong double-sided tape (e.g., 3M VHB) or screws for maximum hold.

To make the surface texture pop as much as possible, I highly recommend printing this model with a low layer height (e.g., 0.12mm or 0.08mm). Using matte filaments (Matte PLA) or wood-filled filaments (Wood PLA) will give a fantastic realistic effect, almost completely hiding the print layers. Light supports may be needed under the snout and ears.

The model prints completely flat on the build plate in just a few minutes and requires absolutely no supports. It is optimized for multicolor printing (AMS/MMU): in the photo, you can see how the contrast between white and brown creates a magnificent wood grain effect. Since it's an object that might come near heat sources, I highly recommend printing it in PETG or ABS to prevent warping, especially if you love using it outdoors in the summer sun.

The model prints easily resting on its side in a single piece. The circular slot is calibrated to hold a standard MagSafe puck with a perfect friction fit, also helping to route the cable neatly. The wide base ensures maximum stability. Printing in PETG or ABS/ASA is highly recommended to ensure the charger friction fit remains solid over time despite the heat generated during charging.

The design with elegant curved lines fits perfectly into any desk setup. Printing is incredibly simple and fast: lay it on its side to print it in a single piece without the need for any supports. The base is wide enough to ensure excellent stability even with heavier phones. Print it in your favorite PLA or PETG to match the colors of your keyboard or office!

The model is optimized for multicolor printing (AMS/MMU), allowing you to create a sporty two-tone striped look like the red and black in the photo. It prints easily on its side without the need for supports. ⚠️ WARNING: A car interior left in the sun can reach extreme temperatures. It is mandatory to print this clip in PETG, ABS, or ASA. If you use standard PLA, the clip will warp and melt during the summer!

The model has a stable base and fits perfectly on bookshelves or coffee tables. It consists of the decorative shell and an internal compartment for water. For the latter, be sure to use "watertight" print settings (multiple walls, generous layers) or insert a small glass test tube. Printed in a matte grey PLA, it gives a fantastic ceramic or stone effect. A simple print with a great impact!

The model has a stable base and fits perfectly on bookshelves or coffee tables. It consists of the decorative shell and an internal compartment for water. For the latter, be sure to use "watertight" print settings (multiple walls, generous layers) or insert a small glass test tube. Printed in a matte grey PLA, it gives a fantastic ceramic or stone effect. A simple print with a great impact!

The level of detail is excellent, from the shoelaces down to the skate wheels. ⚠️ PRINTING TIPS: Because of the skates, the contact surface with the build plate is minimal. The use of supports is mandatory (tree supports are perfect), and the use of a Raft is highly recommended to ensure perfect adhesion during printing. Looks great printed in matte gray, ready to be hand-painted with acrylic

The model features an extremely high level of detail, from the folds of the clothes to the shoelaces. Given the dynamic pose, the use of supports is required (tree supports are highly recommended to preserve underside details). Print it in resin or PLA with low layer heights (e.g., 0.12mm). Matte gray is a great base, but this model truly shines when hand-painted with acrylics to create your own personal "custom edition"!