Vinroth

nicodeimos

Ring hole: 4.8mm.Model size: 35mm x 47mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a>&nbsp;Likes, boosts, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Nintendo and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Zelda ocarina keychain

leychain

Sakul

Replica of Krato's axe from God of War. The axe head is completely 3D printed, the handle is made of wood.For easier assembly you can use the alignment holes in the model in combination with some 1.75mm filament. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/304805/2023-12-24_8093e1d6ef4c8.gif"></figure>❤️Kratos likes that❤️

Kratos Axe God of War

weapons 

missing_string

Version 2 is up, and even more true-to-life! Go check it out at <a target="_blank" href="https://makerworld.com/en/models/483987" rel="nofollow noopener">https://makerworld.com/en/models/483987</a>&nbsp;This is an ultra-realistic 1-1 scale model of the M67 fragmentation grenade with M213 fuse used by the U.S. and Canadian military, among militaries of many other nations. It is an enhanced version of the M33 grenade which preceded it, and was introduced in 1960. It was distinguished from the M33 by an improved fragmentation matrix that was so highly classified, the grenade was not issued to Soldiers fighting in Vietnam until 1968 for fear they would reveal the fragmentation technology to the enemy. There&#39;s your trivia for today.&nbsp;I modeled this off a dummy grenade from a military surplus store which was not as realistic as I liked, and made corrections using multiple reference photos. Given the fact that I don&#39;t have access to live frag grenades to use for 3D modelling, I can&#39;t guarantee the parts of this model are interchangeable with the real grenade (although I don&#39;t recommend you mix 3D printed parts with live grenades anyway). All parts are interchangeable with my model of dummy grenade. Additionally, this is a model of the pre-2015 version of the M67 that is not equipped with the 90-degree confidence clip that serves as a third safety device on the modern grenade. These pre-2015 grenades are still issued, and will continue to be “current gear” until the stockpiles are depleted.&nbsp;The grenade body is hollow and can be used as a storage box for small items or filled with sand to weight the grenade to the correct 14oz. the two halves of the body screw together at the center seam and there is an additional hole where the fuse screws into the upper body. I had to do a bit of finishing work to the body halves to get a tight fit, but this only took about 5 minutes with a hobby knife and sandpaper. The safety clip (silver in the images) is not included in the file, I made it using about 2/3rds of a large paper clip using reference photos.&nbsp;As usual with my munition models, this is a highly accurate model that could be mistaken for a real munition if brandished in public. Be smart and be kind. If you&#39;re going to use this for cosplay in public, you can reduce (but not eliminate) potential problems by printing the grenade body in blue, the universal color for an inert munition. For display, the entire grenade is OD green with black markings, except for the collar (the 2mm lip at the top of the upper body), which is a burnished brass color.&nbsp;The grenade can be verified as inert without removing the pin by looking through the holes at the top of the fuse and verifying that a striker assembly and spring is not present.&nbsp;If you like this model, I&#39;d appreciate a like! I&#39;m working on other munitions models, but the price of inert grenades is definitely a limiting factor, so if you&#39;re looking for somewhere to use your boost tokens, the savings on material costs (15-20 prototypes per upload) would go a long way towards the purchase of reference models. Now that the shameless begging is over, please enjoy and stay tuned for more!

Realistic M67 Fragmentation Grenade Model

fallout

Cloudy Nostalgia

How to support me!If you like my work, consider joining my Patreon where you can have a say in what I print next! Only Patreon members get to see those items and you can even sell them at a certain tier. Finally, if you’d like to learn my tips and tricks for making a hueforge start to finish I offer a coaching session to some of my patreons! Thank you for all your support!<a target="_blank" href="http://www.patreon.com/CloudyNostalgia" rel="nofollow noopener">www.patreon.com/CloudyNostalgia</a>&nbsp;Also, if you have any questions about how to print a piece of mine or if you need help troubleshooting, feel free to join my discord server where you can ask for help!<a target="_blank" href="https://discord.gg/4ays78UJ" rel="nofollow noopener">https://discord.gg/4ays78UJ</a>&nbsp;Also, I upload videos every so often showing how to videos for Hueforge. If you’d like to view here is the link:<a target="_blank" href="https://www.youtube.com/channel/UCG1IDrymVjUyYng7nXrdGnw" rel="nofollow noopener">https://www.youtube.com/channel/UCG1IDrymVjUyYng7nXrdGnw</a>&nbsp;**IMPORTANT INFORMATION**<ul><li>You cannot adjust the z scaling on any hueforge. This will mess with the coloring done and your hueforge will not come out as intended. You can however change the x and y to scale the picture. I recommend only changing by the same percentage. </li><li>To get an accurate print as shown in the photos you MUST use the same filaments listed below. You can change brands (as long as they are similar) but keep the filament colors the same. If you use any other color, you will not get the same results as me. </li><li>What you see in the slicer will not be how the final results will look! Hueforge takes advantage of color bleed to make the blended colors!</li></ul>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 6.2 PLA BambuLab Basic Jade White Transmission Distance: 3.5Swap Instructions: Start with Black At layer #17 (1.44mm) swap to Orange At layer #23 (1.92mm) swap to Jade White for the rest.

Hueforge - Naruto - Side View

2d wall

cv6Channel

A coasterset inspired by the Video Game and TV Show Fallout.&nbsp;Use my printprofile to achieve best results.&nbsp;See also a perfect holder for this nine <a target="_blank" href="https://makerworld.com/en/models/458608#profileId-366705" rel="nofollow noopener">coasters here</a>.&nbsp;

Fallout Coasters

Coaster

Collecticraft

<h2>Insight Unveiled: The Divine and the Mortal</h2>Step into the realm where divine wisdom meets mortal curiosity with &#34;Insight Unveiled.&#34; This extraordinary project brings together the majesty of Zeus, king of the gods, with the enigmatic allure of the human skull.<h3>Key Features:</h3><ol><li>The Divine Visage: The bust of Zeus, crafted with meticulous attention to detail, exudes the power and authority befitting the ruler of Mount Olympus.</li><li>Mortal Remnants: Nestled within the bust lies a human skull, a poignant reminder of the fleeting nature of mortal existence and the eternal wisdom sought by humanity.</li><li>Symbolic Union: The juxtaposition of Zeus&#39;s divine countenance with the mortal skull creates a compelling visual narrative, inviting contemplation on the intersection of the divine and the mortal realms.</li></ol>Project Objectives:<ul><li>Explore themes of mortality, divinity, and the pursuit of knowledge.</li><li>Challenge conventional notions of power and authority by blending the divine with the mortal.</li><li>Spark introspection and philosophical inquiry into the nature of existence and the mysteries of the cosmos.</li></ul>Commercial License: <a target="_blank" href="https://www.patreon.com/CollectiCraft" rel="nofollow noopener">Patrons</a> gain exclusive commercial rights to utilize and distribute this unique fusion of divine and mortal symbolism

Insight Unveiled: The Divine and the Mortal

skull

Zzz3DSelkirk

This is the 4th firearm I&#39;ve created. Modelled after a .32 cal Smith &amp; Wesson snub-nose revolver. The cylinder does spin but this is a non-working prop built to be played with, handled, etc. The cartridges are a separate set of components that need to be put in the cylinder before assembly. I swear by Shoe Goo for all my assembly required projects. <a target="_blank" href="https://eclecticproducts.com/product/shoe-goo/" rel="nofollow noopener">https://eclecticproducts.com/product/shoe-goo/</a> After about 15 minutes, you can easily peel any excess glue. The cartridges fit nicely in the cylinder, give the model some weight and will make a clicking sound when the cylinder is spun. In addition to the 2&#34; barrel and the stock grips, I&#39;ve included a 3&#34; barrel and a fatter set of grips. Also printed a couple sets of grips in TPU but this is not necessary.

Smith & Wesson .32 Snubnose Revolver Prop Gun

next project

3DP RNS

[3DP RNS] DNS Case V1.0 (3D Printed Robot Case)<ul><li>Display and Storage Case [<a target="_blank" href="https://youtube.com/shorts/vGws8z14uwA?feature=share" rel="nofollow noopener">Youtube Video</a>]</li><li>Only the case data has been uploaded. To print the robots, please go to links [<a target="_blank" href="https://makerworld.com/en/models/117513#profileId-128541" rel="nofollow noopener">Worker</a>] and [<a target="_blank" href="https://makerworld.com/en/models/127888#profileId-138393" rel="nofollow noopener">Headless</a>].</li><li>If you subscribe to the YouTube channel [<a target="_blank" href="https://bit.ly/2KC3Tdx" rel="nofollow noopener">3DP RNS</a>], ★ a new robot will be revealed.</li><li>Thank you for your subscribing! It means a lot to me :)</li><li>Commercial License [<a target="_blank" href="https://www.patreon.com/3DPRNS" rel="nofollow noopener">Patreon</a>]</li></ul>&nbsp;※ NoticeHello, friends!Thanks for printing 'Worker' and 'Headless.'I've created a case that can display and store robots.Use it for your robot :)&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/vGws8z14uwA?si=3184hEgprqMAr2BT"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/vGws8z14uwA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

[3DP RNS] DNS Case_V1.0

Mecha collection

kylemraley

<a target="_blank" href="https://makerworld.com/en/models/78647#profileId-82948" rel="nofollow noopener">- Darth Vader Available Here -</a> Full Size Stormtrooper Helmet - Pre colored w/ Bambu Studio & AMS.Multiple plates, and multiple pieces. Glued together. Sorry - no instructions included with original, easiest way for me was to use a reference photo.