Ville Erkkila

Print Doc

Deep trays and spatulas for mixing epoxy glue. Each tray comes with 2 spatulas.These are printed with tear apart tabs for easy storage. The 6-tray stack fits in a 2x1 unit gridfinity bin.&nbsp;These are designed to be printed on their handles to best utilize space. All the print profiles use “arachne” wall generator. Do NOT use the “classic” wall generator as the thin tear away tabs may not print, the spatulas will fall over and the print will then fail. After slicing you should see little tabs connecting all the trays and spatulas into one unit.&nbsp;If you don&#39;t need the trays you can print the spatulas by themselves:<a target="_blank" href="https://makerworld.com/en/models/491565#profileId-405093" rel="nofollow noopener">https://makerworld.com/en/models/491565#profileId-405093</a>&nbsp;There&#39;s also shallow trays for smaller jobs, the orange ones in the photo below:<a target="_blank" href="https://makerworld.com/en/models/491673#profileId-405212" rel="nofollow noopener">https://makerworld.com/en/models/491673#profileId-405212</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000491688/design/2024-06-11_eb6bf934de72e.png"></figure>

Glue spatulas with deep trays for epoxy resin

Liima-alusta

vajojajo

EN:<ul><li>3 normal and 2 smaller Trays for Wagons, Stations and Ticket holders - with or without separator for Stations and Ticket holders</li><li>Ticket holders (5 - 10 for one player)</li><li>Card separator so you can stack different card types without the need to sort them</li><li>Card underlay to help you pick up Cards from the bottom of the original insert</li></ul>You can also split cards into Trays (no Card Separators or Underlays are then needed)Set top and bottom layers to 0 for time and material savings.Scale Card underlay height to your preference.&nbsp;SK:<ul><li>3 normálne a 2 menšie škatuľky na vagóny, stanice a držiaky na lístky - s aj bez prepážky pre stanice a držiaky na lístky</li><li>Držiaky na lístky (5 - 10 až na hráča)</li><li>Rozdeľovač kariet - možno na seba položiť rôzne typy kariet bez potreby triedenia</li><li>Podložka pod spodnú kartu - pre ľahšie vytiahnutie spodnej karty</li></ul>Všetky typy kariet možno rozdeliť do škatuliek (v tom prípade netreba Rozdeľovač kariet ani Podložku) Pre ušetrenie materiálu odporúčam nastaviť 0 vrchných aj spodných vrstiev.Podložke pod spodnú kartu nastavte výšku podľa potreby.

Ticket to Ride Europe: Trays, Ticket holders, Card separator and Underlay

Lautapelit

MatejB

Tablet or phone holder for car backseat. Mounted on front seats headrest.<figure class="media"><div data-oembed-url="https://youtu.be/daxH6tBSDYI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/daxH6tBSDYI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>You can try to print mount for my Toyota headrest dimensions. If it will not fit, you can change it in f3d file in Fusion 360. There go to Modify → Change parameters. Check the photos for parameters descriptions.&nbsp;The mounting dimensions between mount and holders are compatible with <a target="_blank" href="https://www.printables.com/model/449110-universal-tablet-holder-for-carsheadrest-fully-pri" rel="nofollow noopener">this project</a>. So you can combine mounts and holders between these 2 projects.<figure class="image image_resized" style="width:30.15%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433530/design/2024-04-18_c0140bbdf2bb.png"></figure>&nbsp;Included phone and tablet holders with printed spring. Tablet holder is in 2 variants, for clamping of 100-140mm dimensions, and 140-180mm dimensions.&nbsp;Notes:<ul><li>You can print headrest mount with PETG, but based on my experience, in hot summer days the PETG deforms under the load. So you may loose flexible properties. Recommending to print with material with higher temperature resistance than PETG.</li><li>I printed phone/tablet holders from PETG and so far didn&#39;t have any issue.</li><li>Don&#39;t try to configure negative tilt angle in parametric mount. It will work as a positive value. In order to achieve negative tilt, just flip printed part upside down since it is symmetric in this direction.</li><li>After the print, there might be tiny bonds between the sliding and static part. You may need to use some tool to initially push the sliding part. Then sliding has to work fine.</li></ul><figure class="image image_resized" style="width:287.812px;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433530/design/745d8e41-120b-4a8c-a58e-ce08e7a852c7.png"></figure><ul><li>On demand, in the files is available 3mf project for tablet holder for 180_210mm dimension. However this tablet holder was not tested by me, so please keep in mind this. Feel free to share you experience with it.</li></ul>

Parametric tablet/phone holder with printed spring

Autotelineet

DrKriegerAUS

<h3>Description</h3>Q: What is the correct number of bikes to own?A: N+1Q: How the hell do you store all these bikes?I couldn’t find anything on the market that was compact, sturdy, adjustable, and protected my frame/fork and disks. I wanted something on the ground that the bikes could just roll into, especially for the heavy e-bike. This rack stores any number of bikes ‘top to tail’ for maximum space utilisation, or spread out for ease of access. Bikes can be spaced however required. Any number of bikes can be added - only limitation is the length of tube. They can even be added ‘back to back’ for twice the storage. It works as a single bike stand too. It only makes contact with the tyre, fits any size wheel (shorter / longer tubes can be used as required), and has been tested on tyres from 30mm to 2.4”. The two step design means the same parts work on MTB or road tyres. Optional TPU feet to grip the garage floor. <h3>Parts Required</h3>You’ll need approx. 3m of 16mm tube per bike – I used curtain rod from Bunning for all the short pieces. It's cheap and plenty strong enough for the application. I used 1.2mm gal tube for the long pieces connecting all the stands for a bit more stiffness though this is probably overkill. 20x M6x16mm bolts and nuts per bike – optionally you can use dome nuts for most of the exposed threads but you’ll need to ensure you don’t go longer than 16mm bolts2x M3x8mm approx button head bolts to fasten the TPU feet if using - plus 1 per side support<h3>Instructions</h3>I printed in eSun PETG with 3 walls (4 for my E-Bike just in case - though this was overkill). It should work fine in PLA+ but I haven't tried. Print all the parts in the ‘PETG’ file as oriented. Supports are only required for the main ‘middle’ piece under the edge of the braces that span between the tubes (exactly where the tyre makes contact). They need to be painted manually or you'll get supports everywhere. <figure class="image image_resized image-style-align-center" style="width:51.12%;"><img src="https://makerworld.bblmw.com/makerworld/draft/274125/2023-11-19_amv6tcsthdbw.png"></figure><figure class="image image_resized image-style-align-center" style="width:51.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/274125/2023-11-19_ma62rzvwz9ot.png"></figure>Print 2x left and 2x right side supports total (included in the PETG file). Whether you are building for 1 bike or 5+ you only need them for the end pieces. They aren't really needed for 3+ bikes as they won't topple but I still used them for aesthetics and to make the end bikes wobble a tiny bit less. Print 2x TPU feet for each bike plus 4 extras for the side supports if using TPU feet.For each bike cut 2x 600mm lengths of tube and 2x 400mm lengths of tube. The 400mm lengths are the horizontals. The 600mm lengths are the verticals. You might need slightly more than 600mm for 29” wheels (600mm tested with 26”/650/27.5”/700c)For a 16” bike I used 270mm horizontals. If you're making one stand, use the remaining 1m to make 2x 500mm pieces for the side braces. Debur the tubes so they slide into the parts easily. Bolt everything up as pictured or shown in the ‘assembled’ STEP file. If you're doing multiple bikes, don't tighten anything until all parts are in place. I spaced my bikes 450mm centre to centre. You could probably go closer if you don't have oversized handlebars. Tighten all but the top spacer(s). Put your bike in the stand and adjust the height of the top spacer until it supports the wheel but does not push down on the wheel. The bike should roll out relatively easily, but the spacer should still keep the bike upright. If the bike is difficult to remove, the spacer probably needs to be shuffled up a mm or so. Slide on the top caps to cover any sharp edges. Optionally use your slicer to add text to the sign and print a name plate for your bike - since the stand is adjusted to a specific wheel it's nice to know which bike goes where. Edit 24/11/23 - I had the wrong ‘top caps’ in the PETG parts .3mf file. The updated file has a top cap piece that fits the tube better While I was there I split the side feet out into a separate plate since if you're doing multiple bikes you only need one set of feet.

Bike Parking Stand Disc and Fork Safe Modular

Pyöräteline

BamBam Design

<h4>The Sunflower Windmill - Self adjusting Sunflower wind turbine</h4><figure class="media"><div data-oembed-url="https://youtube.com/shorts/Nb2DXeNK04M?si=IG2UF_6DRZEUfwdW"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=Nb2DXeNK04M"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/Nb2DXeNK04M" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Need a bit more wind, but can turn fast as well. Great spring &amp; summer garden decoration<ul><li>Beautiful Windmill with a Sunflower Propeller Design</li><li>Self adjusting to wind direction through the Tail Blade</li><li>100% printed, no Screws or tools needed</li><li>You can add 2 Propellers on one Axle with 2 distances</li><li>Choose your propeller sizes and directions (You get nice effects if you choose different directions)</li><li>Rods are stack able to your needed height</li></ul><h4>Printing:</h4>The rod could be a bit difficult to print, i added custom support, but clean your buildplate and apply some glue.&nbsp;Profile is tested with PETG &amp; PLA 👍🏼 Prefer PETG for Axle and Rod&nbsp;Info:This time the Axle is a bit shorter to add only 2 propeller with 10mm and 2 distances with 5mm each.And i slightly redesigned the tail blade to match the sunflower design. My other windmills are still fully compatible if you want to mix it up:<ul><li><a target="_blank" href="https://makerworld.com/models/235261" rel="nofollow noopener">Toroidal Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/388124" rel="nofollow noopener">Elliptical Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/425419" rel="nofollow noopener">Sunflower Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener">CLAMP for Windmills</a></li></ul><h4>Assembly:</h4><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-04-12_5daa8d4f64298.png"> Thanks to all followers and don&#39;t forget the virtual handshake 👍 ….Happy Printing&nbsp;Some other Windmill Designs:<a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon</a><figure class="image"><a href="https://makerworld.com/en/models/454861" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_9785fb508d759.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb</a><figure class="image"><a href="https://makerworld.com/en/models/250216" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_9a2a48a0331ed.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/235261" rel="nofollow noopener">Toroidal</a><figure class="image"><a href="https://makerworld.com/en/models/235261" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_ca5dfbc30c041.jpg"></a></figure>&nbsp;Checkout this Clamp for windmill, as well🧐 <a target="_blank" href="https://makerworld.com/models/255324" rel="nofollow noopener">https://makerworld.com/models/255324</a><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-03-15_6d9c46a2c3e8c.jpg"></a>&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Sunflower Windmill - Customizable System

Rager1902

The Nuka Cola version of my original design can topper.

Nuka Cola - Can cover original

Can cover

Topik at Printhood.cz

🎁🎉 Thank you very much for your boosts, folks! I really appreciate it 🙈&nbsp;Create your own QR code stands with this customizable generator. You can generate stands for Wi-Fi credentials, URLs, vCards, or phone numbers. Add your own text and customize the dimensions to your liking.&nbsp;This generator allows you to print the QR code on the first layer, ensuring the layer lines merge seamlessly for a clean and clear QR code. Use engineering plate for the smooth result.<h3>How It Works</h3><ol><li>Customize Your Stand<ol><li>Click the &#34;Customize&#34; button.</li><li>Design your stand with your desired specifications.</li></ol></li><li>Download Your Stand<ol><li>In the &#34;Generated&#34; section, select &#34;Stand&#34; and click &#34;Generate.&#34;</li><li>Click &#34;Download&#34; and choose &#34;Download STL.&#34;</li><li>Repeat the process for “QR code + Text.”</li></ol></li><li>Prepare for Printing<ol><li>Select both generated files and drag them into Bambu Lab Studio.</li><li>When prompted, select &#34;YES&#34; to load the files as a single object with multiple parts.</li><li>In Bambu Lab Studio, go to the &#34;Objects&#34; section (top left UI), select the stand and QR code part, and assign them the desired color.</li></ol></li></ol>30 seconds guide on <a target="_blank" href="https://youtu.be/_MCCfodEEQk" rel="nofollow noopener">youtube</a>:<figure class="media"><oembed url="https://www.youtube.com/watch?v=_MCCfodEEQk"></oembed></figure><h3>TIPS</h3><ul><li>Use attached 3MF profile to get better results</li><li>Optimize Dimensions: For a 0.4mm nozzle, use dimensions like 100x80mm. You can use smaller dimensions with a 0.2mm nozzle.</li><li>Calibrate Filament Flow: Proper calibration is essential for a clean first layer and a high-quality QR code.</li><li>Remove Text: If you don&#39;t want text on the stand, simply erase it in the customization process.</li><li>Circular QR Code: To generate a circular QR code instead of a boxed one, check the “Use circles” option.</li></ul><h4>Troubleshooting</h4><ul><li>If the QR code is not visible and only the stand appears, ensure both STLs are imported.</li><li>Rename the models so that the stand is &#34;1.stl&#34; and the QR code is &#34;2.stl&#34; as Bambu Lab Studio prioritizes file names during slicing.</li></ul>&nbsp;The generator is using <a target="_blank" href="https://github.com/xypwn/scadqr" rel="nofollow noopener">scadqr</a> library by xypwn.&nbsp;2024-06-04 - v2<ul><li>added support for fonts</li></ul>&nbsp;

QR Code Stand Generator (Custom Wifi/URL/Phone)

QR code

make 3D

!Cowabunga!&nbsp;This Teenange Mutant Ninja Turtles logo display is a must have for any TMNT collector or fan! &nbsp;Looks great among your collection of vintage toys or other merch!&nbsp;This is actually a re-upload of a design I shared previously. I have made a few modifications to the model and the print profile - so there should be no issues. &nbsp;&nbsp;The sign measures 215mm x 77mm x 15mm.&nbsp;My holders are printed with these filaments:Bambu Lab PLA Matte WhiteBambu Lab PLA Basic Bambu GreenBambu Lab PLA Matte Scarlet redBambu Lab PLA Basic Black&nbsp;LicensingAll my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.For some designs it is possible to buy a individual license for a fixed fee. Please contact me for any details regarding this.&nbsp;How to Support MeIf you like my designs, please give them a ‘like’ as this helps the model being more visible to other users.Also please consider donating via <a target="_blank" href="https://www.buymeacoffee.com/make3d" rel="nofollow noopener">https://www.buymeacoffee.com/make3d</a> All support is highly appreciated!

Teenage Mutant Ninja Turtles Logo (TMNT)

Logot

KYZ Design

<h3>Bees may have bestagons but humans still build rectangular walls. So here are the rectangular frame pieces!</h3>There are framed pieces for a few different sizes:<ul><li>The 12x9 System - recommended for X1 and P1 series printers - the middle pieces are 12 cells wide by 9 cells high. This makes the biggest pieces per print on a 256x256 bed with a filament cutter exclusion area (i.e. on a P1P/P1S/X1C without physically blocking out the filament cutter). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/16011" rel="nofollow noopener">here</a> and I also included this in the print profiles as it is my model (it's one of the first things I modelled and shared after getting my P1P!).</li></ul>&nbsp;<ul><li>The 12x10 System - recommended for the A1 - the middle pieces are 12 cells wide by 10 cells high. This makes the biggest pieces per print on a 256x256 bed without an exclusion area (i.e. on an A1 or a <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">tweaked</a> P1P/P1S/X1C). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/16011" rel="nofollow noopener">here</a> and I also included this in the print profiles as it is my model.</li></ul>&nbsp;<ul><li>The 8x7 system - recommended for the A1 Mini - the middle pieces are 8 cells wide by 7 cells high. These are designed to maximise the 180x180 bed of the Prusa Mini, and consequently will also maximise the bed of the A1 mini. The middle piece for this system can also be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator, rostap. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;<ul><li>The 10x10 system - the middle pieces are 10 cells wide by 10 cells high. These also fit on a 256x256 bed. This makes panels that have a more rectangular aspect ratio and less cells but you may have already started printing these. These may also better fit your wall space that you are trying to fill up due to the slightly different dimensions. The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;<ul><li>The 10x8 system - the middle pieces are 10 cells wide by 8 cells high. These max out a 220x220 bed (Ender 3 and Similar). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator, rostap. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;&nbsp;For those of you that want other sizes for other printer beds, remix is allowed! Or leave a request in a comment if you can wait :)&nbsp;If you need HSW help in general, check out the honeycombwall subreddit.&nbsp;<h3>Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models.</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/594876/2023-12-10_fde779d8f407b.jpg"></figure>

Framed HSW - Various Sizes - Honeycomb Storage Wall

Seinäjärjestelmät

Collecticraft

<h2>Futura Elegance - Modern Vase Inspired by UAUPROJECT</h2>Introducing "Futura Elegance," a modern vase that seamlessly blends contemporary design with artistic flair, drawing inspiration from the innovative aesthetics of UAUPROJECT. This stunning vase transcends traditional boundaries, offering a bold and sophisticated addition to your living space.<h3>Key Features:</h3>Dynamic Shapes: "Futura Elegance" embraces the avant-garde with its cool and dynamic shapes. Inspired by UAUPROJECT's distinctive style, the vase features intriguing contours that captivate the eye, making it a standout piece of modern art.&nbsp;Contemporary Fusion: This vase is a fusion of modern design and timeless elegance. Crafted with precision, it adds a touch of sophistication to any setting, whether it's a minimalist living room or a vibrant office space.&nbsp;Versatile Decor: Elevate your interior with the versatility of "Futura Elegance." Its sleek and contemporary aesthetic makes it the perfect companion for a variety of floral arrangements, adding a dash of freshness to your home or office.&nbsp;UAUPROJECT Inspiration: Drawing inspiration from the innovative designs of UAUPROJECT, "Futura Elegance" embodies the spirit of modernity, pushing boundaries and redefining the conventional perception of what a vase can be.<h4>Why Choose "Futura Elegance":</h4>Distinctive Design: Make a statement with a vase that breaks away from the ordinary, showcasing a unique blend of cool shapes and contemporary aesthetics.&nbsp;Artistic Finesse: Elevate your décor with a piece that not only holds flowers but is a work of art in itself, seamlessly integrating modernity with timeless elegance.&nbsp;Versatile Placement: From chic urban apartments to sleek office spaces, "Futura Elegance" adapts effortlessly to various environments, adding a touch of sophistication wherever it stands.&nbsp;Commercial Licensing: <a target="_blank" href="https://www.patreon.com/CollectiCraft" rel="nofollow noopener">Patrons</a> also have the opportunity to use commercial licenses for their own creative projects, adding versatility and potential income streams.

Futura Elegance - Modern Vase Inspired by UAUPROJECT

Vaasit

Hajimi

如果是单色打印，请关闭擦拭塔For monochrome printing, turn off wiping

Minecraft Diamond Sword Pendant我的世界钻石剑挂件

Minecraft

TripleGWorkshop

Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it!<h3>Color change at 8.6mm (Optional)</h3><figure class="image image_resized" style="width:75.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/805998/2024-03-30_9mswlegz1lrm.png"></figure><h4>Want MORE? Visit the<a target="_blank" href="https://www.printables.com/@TripleGWorkshop/collections/1351585" rel="nofollow noopener"> </a><a target="_blank" href="https://makerworld.com/en/@TripleGWorkshop/collections/981979" rel="nofollow noopener">CHIP CLIP COLLECTION</a></h4><figure class="image image_resized" style="width:846.615px;"><img src="https://media.printables.com/media/prints/829993/rich_content/23117928-3efc-4a62-9f02-b970fd66552e/20240402_133929.jpg#%7B%22uuid%22%3A%2236c8f4b9-60b7-4edc-8088-df594ab0bd6b%22%2C%22w%22%3A2564%2C%22h%22%3A1623%7D?image_process=format,webp"></figure>&nbsp;

Bunny Chip Clips

Zippers

Nikl04

Print yourself pretty vent covers for your home.I needed one for a 67mm hole from a holesaw (this is 100%), i made a fast table for you to scale it to your hole size.Feel free to share!&nbsp;<figure class="table" style="width:44.25%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="background-color:rgb(48, 84, 150);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;width:118pt;">Hole size in mm</td><td style="background-color:rgb(84, 130, 53);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;width:142pt;">Scale of the model in %</td></tr><tr><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">150</td><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">223,88</td></tr><tr><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">140</td><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">208,96</td></tr><tr><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">135</td><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">201,49</td></tr><tr><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">130</td><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">194,03</td></tr><tr><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">125</td><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">186,57</td></tr><tr><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">120</td><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">179,10</td></tr><tr><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">110</td><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">164,18</td></tr><tr><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">105</td><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">156,72</td></tr><tr><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">100</td><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">149,25</td></tr><tr><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">95</td><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">141,79</td></tr><tr><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">90</td><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">134,33</td></tr><tr><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">85</td><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">126,87</td></tr><tr><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">80</td><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">119,40</td></tr><tr><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">75</td><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">111,94</td></tr><tr><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">70</td><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">104,48</td></tr><tr><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">67</td><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">100,00</td></tr><tr><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">60</td><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">89,55</td></tr><tr><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">55</td><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">82,09</td></tr><tr><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">50</td><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">74,63</td></tr><tr><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">45</td><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">67,16</td></tr><tr><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">40</td><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">59,70</td></tr><tr><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">35</td><td style="border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">52,24</td></tr><tr><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:0.5pt solid rgb(142, 169, 219);border-right:medium none currentcolor;border-top:0.5pt solid rgb(142, 169, 219);height:16pt;padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">30</td><td style="background-color:rgb(217, 225, 242);border-bottom:0.5pt solid rgb(142, 169, 219);border-left:medium none currentcolor;border-right:0.5pt solid rgb(142, 169, 219);border-top:0.5pt solid rgb(142, 169, 219);padding-left:1px;padding-right:1px;padding-top:1px;text-align:center;vertical-align:bottom;">44,78</td></tr></tbody></table></figure>

Vent cover round - all sizes with scaling table

Air vent

HpInvent

I have designed a sturdy vase / plant pot inspired by spring, featuring various floral patterns. The vase is available in different patterns. It can also be easily scaled to meet your own requirements. Designed for durability, the vase is suitable for long-term use. So, it&#39;s worth a print ;)  In line with this, there is also a matching round plant pot variant with the same patterns among my other models.&nbsp;Due to many requests for commercial licenses for my 3D models I created a patreon page. You can become a member to get permission for commercial use or just want to support my work : <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener">https://www.patreon.com/user?u=79128277</a>&nbsp;I have a bunch more decoration in my profile that is not part of this contest!!!! So don&#39;t forget to print my other models: <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a><a target="_blank" href="https://makerworld.com/en/models/379622" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000394593/design/2024-03-18_fce89f423e671.png"></a> <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000394593/design/2024-03-08_a8a626fc04c78.png"></a> <a target="_blank" href="https://makerworld.com/en/models/194458" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000394593/design/2024-02-23_539193d8507ba.png"></a><a target="_blank" href="https://makerworld.com/en/models/210984" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000394593/design/2024-02-28_8818bd98777e4.png"></a><a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000394593/design/2024-02-27_c1e7b8a459e5d.jpg"></a><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000394593/design/2024-03-06_ea517b7dbe741.png"></a>Happy printing!

Floral Spring U shaped Vase Diff. Patterns 

Flowers

michelem

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000379716/design/2024-04-23_afe4fcf49329c.png"></figure>A practical tabletop shelf that can be connected and stacked.&nbsp;Available in different heights and 2 versions, flat and rough.&nbsp;Great for organizing cosmetics and small personal care items in the bathroom, as well as spices or coffee cups in the kitchen.&nbsp;Possibilities are endless just get creative.&nbsp;You can connect and stack any shelf, regardless of its height, for maximum versatility.&nbsp;There are also two inserts top/bottom if you want to cover unused holes and give a touch of color to the shelf.&nbsp;Drawer is available only for 75mm version.&nbsp;Print&nbsp;Shelf must be oriented with the back side on the build plate (look at picture)&nbsp;You don&#39;t really need support, but if you have problem with the connect joint add it (look at my 3MF file).&nbsp;.20mm resolution would be fine, you could use a .16mm just for the connectors.

Tabletop Modular Shelf Rack

Shelf

EhRabz

Recommend printing in clear PLA so the LED's will shine through , used 5mm ( 3/16" ) steel rods for recinforcement , and the switch to turn lights on / off is built INTO the hilt with magents ( magnets are the contacts )

Frostmourne with LED's and reinforcements 

Props

ledvinaphotography

The is a collection of make-up storage containers that my wife asked for me to make. While they were designed to fit in a specific area in our bathroom vanity, I thought there were worth sharing in case anyone else could use something similar. The collection is made up of the following:&nbsp;<ul><li>Make-up Palette with Drawer Bottom: 8.25" Wide, 7.25" Deep, 6.25" Tall in back / 5.25" Tall in front</li><li>Daily Regimen Box: 3.5" Wide, 7" Deep, 2" Tall</li><li>Make-up Cascade Container: 6" Wide, 7" Deep, 3.5" Tall in back / 1" tall in front (each opening is 2.25" x 1.25")</li><li>Make-up Brush Container: 4" Diameter, 5" Tall in back / 2.25" Tall in front<ul><li>Make-up Brush Container Insert: 4" Tall, 6 equal segments with center circle opening</li></ul></li><li>Q-Tip Container: 3.5" Wide, 3.5" Deep, 2" Tall</li><li>Shaving Head Container (specific to hold 4 Free-bird shave head replacements): 2.5" Wide, 6.25" Deep, 1.375" Tall </li></ul>The only supports needed are for the knob on the drawer if printed in the layout shown in the 3MF file. I printed all in Bambu PLA White and they all came out looking really nice for the bathroom. Design should scale OK a bit, but the drawer has some pretty tight tolerances so you could run into issues there, could always shrink the drawer an extra 1% to ensure fitment.

Make-up Storage Organization Container Set

Makeup

Tridense

Model is only resized to what would fit on most printers. <h4>Dimensions: 127 x 107 x 223mm</h4><h4>1:10 scale</h4> One of Augustus Caesar’s most famous portraits is the so-called Augustus of Primaporta of 20 B.C.E. (the sculpture gets its name from the town in Italy where it was found in 1863). At first glance this statue might appear to simply resemble a portrait of Augustus as an orator and general, but this sculpture also communicates a good deal about the emperor’s power and ideology. In fact, in this portrait Augustus shows himself as a great military victor and a staunch supporter of Roman religion. The statue also foretells the 200 year period of peace that Augustus initiated, called the Pax Romana.In this marble freestanding sculpture, Augustus stands in a contrapposto pose (a relaxed pose where one leg bears weight). The emperor wears military regalia and his right arm is outstretched, demonstrating that the emperor is addressing his troops. We immediately sense the emperor’s power as the leader of the army and a military conqueror.Delving further into the composition of the Primaporta statue, a distinct resemblance to Polykleitos’ Doryphoros, a Classical Greek sculpture of the fifth century B.C.E., is apparent. Both have a similar contrapposto stance and both are idealized. That is to say that both Augustus and the Spear-Bearer are portrayed as youthful and flawless individuals: they are perfect. The Romans often modeled their art on Greek predecessors. This is significant because Augustus is essentially depicting himself with the perfect body of a Greek athlete: he is youthful and virile, despite the fact that he was middle-aged at the time of the sculpture’s commissioning. Furthermore, by modeling the Primaporta statue on such an iconic Greek sculpture created during the height of Athens’ influence and power, Augustus connects himself to the Golden Age of that previous civilization.The dolphin became a symbol of Augustus’ great naval victory over Mark Antony and Cleopatra at the Battle of Actium in 31 BCE, a conquest that made Augustus the sole ruler of the Empire. The cupid astride the dolphin sends another message too: that Augustus is descended from the gods. Cupid is the son of Venus, the Roman goddess of love. Julius Caesar, the adoptive father of Augustus, claimed to be descended from Venus and therefore Augustus also shared this connection to the gods.[full reading here, <a href="https://www.khanacademy.org/humanities/ap-art-history/ancient-mediterranean-ap/ap-ancient-rome/a/augustus-of-primaporta" rel="nofollow">khanacademy</a>]

Augustus of Prima Porta

Patsaat

3Dacores

The YouTube logo, crafted with precision in emboss letters, epitomizes the platform's iconic identity.&nbsp;Its raised, three-dimensional design adds depth and sophistication, creating a tactile connection with viewers.&nbsp;The embossed lettering elevates the logo, symbolizing the elevated content found within the vast realm of YouTube a place where creativity and innovation converge in a visually striking manner.&nbsp;The subtle play of light and shadow on the embossed surface adds a touch of elegance, capturing the essence of YouTube's influence and prominence in the digital landscape.&nbsp;<blockquote>Disclaimer: The use of the logo or character in this design is for illustrative purposes only and does not imply endorsement or sponsorship. All trademarks, logos and characters are the property of their respective owners. Any reference to specific brands is not intended to infringe upon or challenge the ownership rights of the trademark holders. I respect the intellectual property of all brands and/or characters mentioned or used in this design. If you think this design infringes on the ownership rights of the trademark, please submit a copyright complaint, and this design will be removed immediately.</blockquote>

YouTube logo with emboss letters

Youtube signs and lights

UlleiJ

I have designed this profile for LED strips up to max 15mm wide. The beam angle is 45 degrees, making this profile perfect for indirect lighting. The fit is perfect and the diffuser snaps into place on the side without the need to use glue.<ul><li>Printed in PLA/PETG translucent</li><li>0.28mm layer height</li><li>2 walls</li><li>scale lengthwise as needed to fit your printer bed</li></ul>Update 29.02.2024<ul><li>New: endcap with hole</li><li>New: connectors for LED profiles</li></ul>Update 28.02.2024<ul><li>New: endcap</li></ul>&nbsp;

LED Strip profile 45 degree

Light related

Jerryie

Printable ball bearings&nbsp;<h3>Quick tips for successful print: </h3><ul><li>Use 3Dlac, glue stick, or Magigoo for better adhesion.</li></ul>..or simply clean the bed with isopropyl <img src="https://media.printables.com/media/prints/583731/rich_content/5722f4db-5ab6-4e92-b736-ffe3f81f5c33/thumbs/inside/1280x960/jpg/1694851972822.webp"><ul><li> Reduce flow rate to .95</li></ul><img src="https://media.printables.com/media/prints/583731/rich_content/7141a838-d751-4c77-a1e7-9b666d36d95b/screenshot-2023-09-16-114202.png"><ul><li>If you are experiencing difficulty with bearing rotation, don&#39;t worry it should loosen up and become much smoother over time, or add some lube.</li><li>For best results, ensure the bed is not too close to the nozzle!</li></ul>These dimensions:<figure class="image image-style-side image_resized" style="width:76.41%;"><img src="https://media.printables.com/media/prints/583731/rich_content/61d37ebc-111b-4165-a5ed-6fb1d37cc88a/thumbs/cover/800x600/png/6002.webp"></figure>8 x 22 x 7 mm - 608 9 x 24 x 7 mm - 60915 x 28 x 7 mm - 690210 x 26 x 8 mm - 600012 x 28 x 8 mm - 600115 x 32 x 9 mm- 6002&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<h4>On the other hand, it is a good toy for a cat, what do you think? </h4><figure class="image"><img src="https://media.printables.com/media/prints/583731/rich_content/785f29c2-87d3-447a-9fea-f3ef3232f9a9/ezgifcom-optimize.gif"></figure>

Print in place BALL bearings

Parts

Powerpill.prints

<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-18_5fb8e169839cd.png"> This pack has been all set up for super simple and easy printing with the AMS or AMS lite!All the models are set to 2 - 4 Colours! Just load your filament, slice and go!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed these keychains, please consider boosting to support the creator. Thank you!</boostcontent></boostme>Most keychains take between 45 minutes to 1.5h to print!<h2>This Keychain pack has 50 items in it separated onto 36 different plates! Games included:</h2><h3>Metroid, Zelda I &amp; II, Duck Hunt, Super Mario Brothers, Dr. Mario, Punch Out, Donkey Kong, Ice Hockey, Excitebike, Balloon Fight, Kid Icarus, and Ice Climber!</h3><h2>Check out My other Video Game Keychain Packs here:</h2><figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/136252#profileId-148211" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_bf102988c5d4e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/136252#profileId-148211" rel="nofollow noopener">Super Mario Bros. 3 Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/177083#profileId-194702" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_af8e11b72f8b8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/177083#profileId-194702" rel="nofollow noopener">Pokemon Keychain Pack #4</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/121800#profileId-131121" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_d591f34521b71.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/121800#profileId-131121" rel="nofollow noopener">Pokemon Keychain Pack #1</a></td></tr></tbody></table></figure>All models have been test printed on the A1 Mini with the AMS Lite!  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_65642b6d44be1.png">I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there&#39;s one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, you can modify the size of the “Keychain hole” object in BambuStudio to make it a little larger, or take a small drill bit and drill the final keychain to make it a little bigger!&nbsp;I purchased my <a target="_blank" href="https://www.amazon.ca/gp/product/B07DC9YZXV/" rel="nofollow noopener">keychain set from Amazon</a> if you&#39;d like to get something similar!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_39c8a218834e3.png">All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-20_5772d38e54629.gif"></figure>I made some changes to the first layer and first layer infill speeds, reducing them both by about half. This increases the print time for the first layer, but increases the bed adhesion and print quality a bit. If you find that the first layer is printing too slow for your liking, feel free to reset them both back to default settings in the speed tab.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-01-15_c5fc221922c1c.webp"></figure>If you want some extra crisp pixels, you can try printing these with the 0.2mm nozzle, but I didn&#39;t think the increased print time was really worth the extra quality. It&#39;s definitely noticeable, but I didn&#39;t think the tradeoff was there. Feel free to experiment and try it yourself!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_e1de8136a8cba.png">Want to remove the keychain hole? No problem! Each keychain has a “Keychain hole” object on each plate. Just select it, delete it, and re-slice!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-20_652472aa40ac8.gif"></figure>Want to scale these up really large to make some wall art? Just delete the “Keychain hole” object, then scale the X and Y axis to fit your print bed. Keep the Z-Scale back to 3.08mm so you&#39;re not printing extra layers though!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-20_5bb325e63de11.gif"></figure>If you notice any settings that could be changed or improved, please let me know! I&#39;d love to make any adjustments necessary so they all print great! If there&#39;s any other packs or characters you want to see, leave a comment! Like this pack? Check out my other video game keychain packs here:  <figure class="table" style="height: 261.055px; width: 960px"><table style="background-color: rgb(255, 255, 255); border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/172935#profileId-189959" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_bee3dac9a4a4f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/172935#profileId-189959" rel="nofollow noopener">Pokemon Keychain Pack #3</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/162397#profileId-178258" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-01-29_ca2f6c28ed6ef.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/162397#profileId-178258" rel="nofollow noopener">Kirby Keychain Pack</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/144042#profileId-156624" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-01-29_1f9887d1aa63b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">Pokemon Keychain Pack #2</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/128878#profileId-139600" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-01-29_c6b1251ef82d6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/128878#profileId-139600" rel="nofollow noopener">Undertale Keychain &amp; Wall Art Pack</a></td></tr></tbody></table></figure>

Nintendo Classics Keychain Pack

Keychain

eds_3d_shop

Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel. There are several reports that such AMS units arrived to users from 08.2023. Please check the thickness of AMS Funnel Buttons before printing the covers! If the thickness is more than 1mm (should be about 2mm thick) - then take this version. If it is about 1mm thick - then take the <a target="_blank" href="https://makerworld.com/de/models/40194#profileId-39898" rel="nofollow noopener">original here</a> or <a target="_blank" href="https://www.printables.com/de/model/369815-perfect-fit-bambu-labbambulab-ams-feeder-button-co" rel="nofollow noopener">here</a>.<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:82.55%;"><img src="https://makerworld.bblmw.com/makerworld/draft/121825/2023-10-25_fjz6zgrdd2iu.png"></figure></td><td><figure class="image image_resized image-style-align-center" style="width:88.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/121825/2023-10-25_363yss4pls76.png"></figure></td></tr></tbody></table></figure> IMPORTANT! Pay attention to the thickness of PTFE tubes - unfortunately they are very different! <figure class="table"><table><tbody><tr><td><figure class="image image_resized image-style-align-center" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/121825/2023-10-25_9w4jlf6qy5xd.jpeg"></figure></td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/121825/2023-10-25_3snknmbvlir5.jpeg"></figure></td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/121825/2023-10-25_j7q9e3mgkylu.jpeg"></figure></td></tr></tbody></table></figure>My model is designed for 4mm +/- 0.05 PTFE tube!&nbsp;<h3>Bambu Lab X1 AMS Feeder Button Cover/Protector - what is that good for?</h3>I have read some reports that the abrasive filaments "grind" the feeders from AMS (which are themselves from the plastic) very quickly! And this problem may <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-the-feed-funnel-assy" rel="nofollow noopener">affect the loading and unloading filaments</a> !<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:70.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/121825/2023-10-25_8hoqibaoyj3w.png"></figure></td><td><figure class="image image_resized" style="width:66.69%;"><img src="https://makerworld.bblmw.com/makerworld/draft/121825/2023-10-25_u8iyxwgrbe3q.png"></figure></td></tr></tbody></table></figure>I found an interesting feeder cap at Printables (thank you, Maverick Ng, for sharing your model!) and reconstructed it so that the cap sits very stable on the feeder and can still be easily pulled on and removed. Look at Installation-Video on my Instagram Channel - its very easy! :-) &nbsp;With the 10mm long PTFE tube in it, the feeders are now well protected! For printing of really abrasive filaments - take better 30mm PTFE tube - then PTFE inserts are rubbed off more slowly, as short one.&nbsp;Please read the print instructions carefully! They are important so that the small parts can be printed correctly and then sit and hold well on the feeder! If you have done everything right and the protectors should still fit too loosely - you are welcome to use the stiffer version - the jaws are 0.4mm thicker: <a target="_blank" href="https://makerworld.com/de/models/49677#profileId-51528" rel="nofollow noopener">https://makerworld.com/de/models/49677#profileId-51528</a><h4>Print / Install Instructions:</h4><ul><li>place them with the logo on the build plate</li><li>first layer line width: 0,35 (0.4 mm Nozzle)</li><li>first layer speed: 10ms per second (for perfect look of the button-surface)</li><li>2 perimeter, 4 top/bottom layer, 20% infill</li><li>take better PLA/ASA - they are stiffer, for better hold on the feeder</li><li>print layer height: 0.16mm and WALL generator: Classic (in this case please no Arachne) !!!</li><li>It is helpful to swith your Bambulab Printer from “Standard” Speed to “Quiet”!</li></ul>Cool recomendation from User <a target="_blank" href="https://www.printables.com/de/@SHAYDED_915092" rel="nofollow noopener">SHAYDED </a>(Thank you! :-): “If you are struggling with sagging, move the parts closer to the aux fan, orient the overhang towards it, and crank it up to 70-100%”. I had no problems with sagging (just printed 4-5 of them at once and slow), but why not? :-)Take a look for Video/Post about this model on my instagram channel: <a target="_blank" href="https://www.instagram.com/eds_3d_shop/" rel="nofollow noopener">https://www.instagram.com/eds_3d_shop/</a>&nbsp;!!! Please take a look on this video, here you can see how you can easy get these protectors on the feeder properly!<figure class="image image_resized" style="width:36.25%;"><a href="https://www.instagram.com/reel/Cnb__BWr8Jv/?utm_source=ig_web_copy_link" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/121825/2023-10-23_aff5c1715b253.jpeg"></a><figcaption><a target="_blank" href="https://www.instagram.com/reel/Cnb__BWr8Jv/?utm_source=ig_web_copy_link" rel="nofollow noopener">https://www.instagram.com/reel/Cnb__BWr8Jv/?utm_source=ig_web_copy_link</a></figcaption></figure>Short and cool description from User <a target="_blank" href="https://www.printables.com/de/social/35822-spectregadget" rel="nofollow noopener">SpectreGadget</a> : “Push forward with the back of the cap against the lever to snap it in place. Then line up an press firmly down to get over the existing inlet, until it snaps in place.”&nbsp;— ! — &nbsp;Thanks for downloading, rating in advance and please don't forget to like this modell! ;-)&nbsp;Take a look at my another very helpful modells for X1/P1P/P1S:&nbsp;<figure class="image image_resized image-style-align-left" style="width:10.14%;"><img src="https://makerworld.bblmw.com/makerworld/draft/121825/2023-10-25_v03cfprhprbx.png"></figure>&nbsp;<a target="_blank" href="https://www.printables.com/de/model/344902-eds-powerfull-magnetic-bambu-labbambulab-x1-ams-hu" rel="nofollow noopener"> - Powerfull magnetic Bambu Lab/Bambulab X1/P1S/P1P (AMS Hub compatble!) Exhaust Fan Muffler / Fan Silencer without Supports/Bridges!</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-align-left" style="width:10.06%;"><img src="https://makerworld.bblmw.com/makerworld/draft/121825/2023-10-25_0ogi96h8p4nn.jpeg"></figure>&nbsp;- <a target="_blank" href="https://www.printables.com/de/model/551878-wide-version-of-bambu-lab-magnetic-purge-poop-slid" rel="nofollow noopener">Your BambuLab X1 /P1P/P1S doesn't have enough space in the back for poop collection? Print this slide for side collection!</a>&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-align-left" style="width:9.91%;"><img src="https://makerworld.bblmw.com/makerworld/draft/121825/2023-10-25_jpq6p58thtxw.png"></figure>&nbsp;- <a target="_blank" href="https://www.printables.com/de/model/569798-refillable-charcoal-activated-carbon-filter-replac" rel="nofollow noopener">Do you start to smell melted plastic when printing? Time to replace filter! Or print this one and fill it with carbon!</a>&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-align-left" style="width:9.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/121825/2023-10-25_7z8blz2p93kp.png"></figure>&nbsp;- <a target="_blank" href="https://www.printables.com/de/model/598950-slim-side-silica-dryer-pod-drybox-with-snap-fit-li/files" rel="nofollow noopener">Slim side silica dryer pod (drybox) with snap fit lids for Bambu Lab AMS</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)

Perfect Fit Bambu Lab AMS Feeder Button Cover Protector -> for NEW revision of AMS feeding funnel!

Kandur

Enjoy the magnetic remix of the original poop chute (<a target="_blank" href="https://makerworld.com/en/models/22435#profileId-26195" rel="nofollow noopener">link</a>) form a great guy: @ed.burnett25 (link) ! “Yet another poop chute design.” And added some 3M sticking magnets (freely comes with the bambu printer), so the poop chute is now ideal for IKEA KALLAX - if you have small space around the printer, and if the tray has to overhang. Works very well and it's printed with no support. Enjoy! And thanks Ed!

Bambu P1,X1 Magnetic Poop Chute [REMIX]

Poop chute

angrelou

update 02/11/2024I uploaded a new model witch solves the problem of the hook breaking when force is applied.Thanks you all for your comments, making this model better for everyone. Download the V 2.0 &nbsp;Lately, I&#39;ve noticed that they always upload the same STL file to all platforms and always encounter the same problem.I took it upon myself to design a new case that solves the issue all previous models had, which is that they all open too easily.After several failed attempts, I finally managed to make everything fit perfectly without the need for supports.At the moment, i only created 3 models, but i will be uploading more models soonEnjoy the 3D printAs always, have fun, and I&#39;ll be uploading more things soon.(I recommend using pla+)If you liked the design, check out my profile and subscribe, you won&#39;t regret it.

Toothbrush Travel Case

Toothbrush

Sakul

“Box Of Everlasting Roses With Custom Name Tag” Perfect gift for your significant other that you can customize to celebrate your relationship on Valentine&#39;s Day.This box of roses doesn&#39;t need water and will never wilt away. To customize the Name Tag: - Press on Object under Process - Rightclick on Textshape - Change your Text (you can also choose different fontsizes and styles here)   How to build: Print all the parts out; the provided design is optimized to cut down print time while maintaining a high-quality finish. Insert the pins into the roses. Place the inlay into the rose box.<figure class="image image_resized" style="width: 67.36%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000150617/design/2024-01-21_30d453ae60eef.jpg"></figure> The inlay needs to be printed without top and bottom layers. The exposed infill will act as a guiding grid for the roses.<figure class="image image_resized" style="width: 67.2%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000150617/design/2024-01-21_1c227a7a96f8b.jpg"></figure> The name tag is aligned on the front side of the box. Fix the name tag in place with some glue. There is also a version without the name tag that can be found in the raw model files.<figure class="image image_resized" style="width: 69.22%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000150617/design/2024-01-21_9ae7d7abfb4ac.jpg"></figure> Put the lid on and gift it to your loved ones.  If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you <a target="_blank" href="https://ko-fi.com/sakul" rel="nofollow noopener">“buy me a coffee”.</a>  Check out my newest Uploads: <figure class="table" style="width: 95.25%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/439005#profileId-344550" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000150617/design/2024-04-22_dc79389f19d97.jpg"></a><figcaption>❤️“Heart of Everlasting Roses”❤️ </figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000150617/design/2024-06-04_88000876832aa.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td></tr></tbody></table></figure>

Box Of Everlasting Roses With Custom Name Tag

Valentines day

Gridfinity baseplates completely remodelled from scratch, designed to minimise print time.<ul><li>Lower overall height (top trimmed)</li><li>Flares on the bottom removed</li><li>Smaller radii</li></ul>Designed for PLA and other materials with good first layer adhesion. You may need to add a brim to print with ASA/ABS. Print <a target="_blank" href="https://makerworld.com/en/models/76537" rel="nofollow noopener">these bins</a> next! <img src="https://makerworld.bblmw.com/makerworld/draft/285381/2023-11-28_4d90d07fb6c75.png">&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my other Gridfinity models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my Honeycomb Storage Wall models.

Gridfinity Superlight Baseplates

Gridfinity

PenolopyBulnick

This Moon and Stars masquerade mask is designed to look like it is floating on your face because you print the first layer, then pause and add a piece of tulle. Then you restart the print and the tulle is embedded in the print as it continues to add layers. After it's done, you cut out the mask and out the eye holes. Do not use glue on the bed, it will make it impossible to get it off without tearing it. Moon and stars can also be printed separately. I printed on Ivory Tulle to match my skin tone, but you can go crazy and do any color you want. Attach a ribbon to each side to tie on. I've also used double sided tape to just tape it to my face so it really looks like it's floating there!More information on the design and printing process: <a href="https://www.instructables.com/Flexible-3D-Print-Masks/" rel="nofollow">https://www.instructables.com/Flexible-3D-Print-Masks/</a>

Floating Moon and Stars Masquerade Mask

Apparel

Wekster

if you like this kind of stuff consider supporting me on my Patreon patreon.com/wekster

Gizmo - single and multicolor

Figures

HackMan

Simply print this tool to help you to maintain your extruder.

Extruder Maintenance Tool

Maintenance

grwang41

Applicable to all sizes (ELEGOO, R3D, JAYO, POLYMAKER, ESUN...) Cardboard Spool can be used normally and stably in P1/X1 AMS&nbsp;The fixed structure of the central axis and the desiccant can be added to the central axis part. The increased weight is more suitable for rotation in P1/X1 AMS.&nbsp;Surface hollow design saves filament

P1/X1 AMS Cardboard Spool Adaptor

Filament related

Desmodromic

Love these hex pattern baskets, bins or trays for organizing things around the house. This one was a request from my spouse and is easily scaled vertically if you need to adjust the height. Just watch if you scale too short in the Z axis as the overhang on the hexagons gets rough. These are a little over 6 1/4" long, 4" wide and around 4-1/8" tall (160mm x 100mm x 105mm) on the exterior. I designed in strong corners and edges and some small support ribs on the long hex pattern surfaces. They print nicely in PLA and are efficient on filament, around 86g per basket. My recommended designer profile has 5 top and bottom layers for strength and speed. Print times are long due to the pattern but I like how they look and how lightweight they are.

Pantry Organizer Basket

Holders

左狗拳

模型外形参考：蝴蝶刀（Balisong Butterfly Knife）组装工具：胶水分件：已分件（自行拆解）其他：模型以设计好打印公差，请视自己机器设置打印参数。原创模型，仅供个人打印，请勿商用。组装视频：<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1d34y1G7MX/?spm_id_from=333.999.0.0&vd_source=ce261a6ae096f6019cad589ef253bc72"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1d34y1G7MX&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1d34y1G7MX&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

蝴蝶刀（Balisong Butterfly Knife）

Knives

franceschellifederico

Looking for a practical solution to label your cables? This 3D printable cable tag is your answer! Designed to provide a sleek and organized way to identify cables, this tag offers space to write names or labels, ensuring easy identification of cables in your setup.&nbsp;&nbsp;