Viking818

T.giovanzana

***************************** V3 - 2024-04-15Added new print profile for A1 mini - 180x180plates.For every part in this case you have 2 pieces.You only need to download the stls, import in your 3d printer profile and print one stl a time (join the 2 parts and glue them - optional but recommended).Assemble as normal instruction below.&nbsp;***************************** V2 - 2024-04-10Added 2 versions of &#34;Base&#34;, specifically projected to accomodate slim guns. The base is large 35mm instead of the standard 50mm.&nbsp;***************************** V1 - 2024-04-08This is my new modular pistol/gun rack.It is universal for Glock, S&amp;W, Sig, Ruger, and many others.I had the inspiration from an article in an online shop, and I starded drawing it during the all night :)You can start from one module and add as many as you want.&nbsp;If you want the module for one gun you need:StartBase (design that you prefer)End&nbsp;If you want the module for two gun you need:StartBase (design that you prefer)MiddleBase (design that you prefer)End&nbsp;Just add one Middle and one Base every gun you want to add to your new modular rack.&nbsp;&nbsp;Hardware: You only need screw M4, 20mm lenght and a bit of filament!When mounting you need to start to the end, example for 2 module rack: End screwed to the Base, Middle screwed to the Base, other Base screwed to the Middle, Start screwed to the Base.&nbsp;Please feel free to write your comment!&nbsp;You may also like:<a target="_blank" href="https://makerworld.com/en/models/458424" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420084/design/2024-05-09_b6854913d7436.webp"></a> <a target="_blank" href="https://makerworld.com/en/models/434889" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420084/design/2024-04-24_a6b1293e3ada7.webp"></a> <a target="_blank" href="https://makerworld.com/en/models/429884" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420084/design/2024-04-24_cf8a8ca7201af.webp"></a> <a target="_blank" href="https://makerworld.com/en/models/428993" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420084/design/2024-04-24_8a361d0d54429.webp"></a>

Modular pistol/gun rack (Glock, S&W, Sig, Ruger)

Guns 🔫 

kellytrinh

Just a simple Garbage Can / Trash Can.<h2>2 print profiles: one with logo, the other without logo</h2>&nbsp;Check my other models for my other garbage can!&nbsp;Enjoy!

Garbage Bin, Trash Can, Garbage Can, Trash Bin

Printednest

CAR-A-MEL | FULLY 3D PRINTABLE TOY CAR KIT&nbsp;All about this project - <a target="_blank" href="https://www.printednest.com/caramel-r1" rel="nofollow noopener">Caramel R1</a>Assembly guide - <a target="_blank" href="https://www.youtube.com/watch?v=2QrN8Uxs8ac" rel="nofollow noopener">on YouTube</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_71d09720569fd.jpg"></figure>&nbsp;What is CARAMEL&nbsp;CARAMEL is fully 3D printable (FDM) toy car consisting of 40+ parts, printed without supports. All you need is our data and your 3D printer and you can easily manufacture your own toy in the comfort of your home. In case some part get lost or broken, no worries – just re-print the missing or broken element and the toy is fully functional again.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_122084988a50a.jpg"></figure>&nbsp;CUSTOMISABLE - You can make your toy in any scale and any colour combination you can think of – you can try to print it as small as possible, while still being fully functional, or you can go the opposite direction and make it as big as your device allows you - all black, from carbon, big one or fast printed? It's a game, it's your decision. No rules, no restrictions, push your limits.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_5bf31debe539f.jpg"></figure>&nbsp;SUSTAINABLE - Toys can be damaged or broken in the heat of the play, sometimes that is the end of it – not with CARAMEL. You can only print the damaged part and make your CARAMEL fully functional again.We ship data only, nothing else, so there is no carbon footprint; the kit needs no supports to print, so there is no waste and everything fits perfectly without a single drop of glue.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_e1ef006664b03.jpg"></figure>&nbsp;EXTENSIBLE - We are developing NEW extensions and custom parts, so if you or your child are tired of your CARAMEL, you can easily upgrade it.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_6122e7f1d458.jpg"></figure>&nbsp;OPEN DESIGN - We would like to hear your thoughts and get your feedback. Do you think CARAMEL can be improved? Do you have an idea for custom parts? You can become part of the design process – let us know your ideas and we can make them reality. You can send us your designs and we will share them with community, for FREE.

Caramel R1 Car assembly kit

Toys

Dr.  J. Ma

Remake BetaFPV Pavo 20 whoop duct 3d printed. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/140989/2023-10-31_0a118a627612d.gif"></figure>&nbsp;Why 3d print the ductThe original whoop duct cost $4 but your printed one is even cheaper ;-) also with different colors and to try different materials!&nbsp;Pavo20 has a molded frame with PA12 material. It is quite heavy. Here is a free version of it. It is not reverse engineering the original frame but fleshly design. &nbsp;The original whoop weighed 13.8g. &nbsp;There are 2 versions<ul><li>Lite: single wall, weighed 9.6 grams, 4 grams lighter than original molded frame. </li><li>Strong: 2 walls, weighed the same as original whoop but stronger. </li></ul>&nbsp;Original frame dimension from BetaFPV website. <figure class="image image_resized" style="width:65.92%;"><img src="https://cdn.shopifycdn.net/s/files/1/1778/6615/files/1_b9a7b382-a2e6-4c5e-959b-eaa1df63e036_1024x1024.jpg?v=1695626159"></figure>&nbsp;Suggested materials:<ul><li>PETG-CF</li><li>PLA-CF</li><li>PC</li></ul>PETG has a very similar mechanical properties to the orginal PA12 but when it with CF, it loads much better. You can also try with PLA for prototypes. &nbsp;You will need 4 m2 screw inserts with diameter 3 or 3.2 mm. Use heat insert by soldering iron or screw driver heated by a lighter. Press from top until it is the same level as the plastic part. &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/140989/2023-10-30_656118fd198e1.png"></figure>&nbsp;&nbsp;

BetaFPV Pavo 20 3D Printed Whoop Duct (strong & lite)

Project

GlennovitS 3D

UPDATE 13. Dec 2023 - Added 12 more sizes! (same lengths, but with a bigger or smaller lid/opening - size 30 and 50. Size 40 is the original) Enjoy!&nbsp;With this simple little print, you can make your bags a lot easier to use in the kitchen! It’s easy to open, pour and close again. Just print and mount on the bag and you are ready to go! No extra hardware needed - all 3D printed. Ready within an hour - almost no reason not to try this ;-)<h2>Overview</h2>The model comes in 18 sizes for now! It's based on the diameter of the lid/opening and the length of the clip. The diameter comes in 3 sizes:<ul><li>30 mm</li><li>40 mm</li><li>50 mm</li></ul>All lengths of the clips in a particular diameter size, uses the same Cylinder and Lid.The clip comes in 6 lengths (currently from XS to XXL). The total length of the different sizes is approx.:<ul><li>XS: 55, 65, 75 mm (depending on the diameter of the lid/openening)</li><li>S: 90 mm</li><li>M: 120 mm</li><li>L: 150 mm</li><li>XL: 180 mm</li><li>XXL: 210 mm</li></ul>For your information, the sizes used on the images are:<ul><li>Pink: 40 - XS</li><li>Yellow: 40 - XL</li><li>Blue: 30 - XS</li></ul>If you have a request for more sizes or other ideas that would make this clip even better, please leave a comment and I’ll get back to you!<figure class="image image_resized image-style-side" style="width:40.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/450294/2023-12-11_bc82b2a49eaeb.gif"></figure><h2>Assembly</h2><ol><li>Cut a hole in the bag (fx. a hole in the corner just big enough to fit the cylinder)</li><li>Hold the Cylinder in the hole with the thread sticking out.</li><li>Mount the Clip around the bag and Cylinder base</li><li>Screw the Lid on</li></ol><h2>Print instructions</h2>It prints easy and can print with default values. There are some tips though to make it better.<ul><li>Supports: No - the print-in-place hinge prints without supports!</li><li>Walls/perimeters: 3-5 - the more walls, the stronger but more filament is used - so test a see what you find the best.</li><li>Infill: The more infil, the stronger it will be. Mostly needed on the longer Clip versions.</li></ul>&nbsp;Happy printing!&nbsp;<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>

Ultimate Bag Clip (with Lid - easy access!)

Home

Good Day Designs

Hey everyone!I just started getting into electronics and design after a bit of 3D printing. This is my first official project with proper documentation, measurements, and testing around a Raspberry Pi. The design is purposeful where the SSDs stick out and with cables going around, wrapped in a cable sleeve for an interesting look. The OLED helps to monitor the device and to check ip.Updates:<ul><li>9/22/2023: Initial release</li></ul>Parts used:<ul><li>1x Raspberry Pi 4B 2gb</li><li>1x OLED 0.96 i2c display module</li><li>Required cables (ethernet, power cable, etc.)</li><li>1x 60mm 5v USB fan</li><li>2x USB to SATA cable</li><li>2x SSD 2.5"</li><li>2x M3 14mm-16mm screw</li><li>23x M3 6mm screw</li><li>25x M3 4mm screw</li><li>2x M3 nut</li></ul><a target="_blank" href="https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_4?crid=XHDE9KMMJRLB&keywords=sata%2Bto%2Busb%2Bconnector&qid=1695431511&s=industrial&sprefix=sata%2Bto%2Busb%2Bconenctor%2Cindustrial%2C86&sr=1-4&th=1" rel="nofollow noopener">https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_4?crid=XHDE9KMMJRLB&keywords=sata%2Bto%2Busb%2Bconnector&qid=1695431511&s=industrial&sprefix=sata%2Bto%2Busb%2Bconenctor%2Cindustrial%2C86&sr=1-4&th=1</a>All up to you but this is how I printed mine:<ul><li>Printer: Bambu Lab P1P & Elegoo Neptune 3 Plus - for the inner panels</li><li>Some adjustments have to be made in terms of the base</li><li>Walls: 4</li><li>Top/bottom: 4</li><li>Nozzle: 4mm</li><li>Layer height: 0.16mm</li><li>Infill: 15-20% - any pattern</li><li>Supports: ON for outer panels - tree</li><li>Brim: ON for outer panels</li></ul>Here are some assemblies to help install and notes:<ul><li>SSD side bracket is to be mounted inside, keeping the 2 SSDs in place</li><li>60mm USB fan apparently can't be controlled so I'd recommend an adapter with a physical knob attached</li><li>There are 3 versions of Front Panel Outer for OLED, no OLED, and additional airflow.</li><li>SSD top panel bracket only needs 2 screws for SSD on the top as it's stable enough</li></ul><figure class="image image_resized" style="width:52.04%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_f2d7f21300bcb.png"></figure><figure class="image image_resized" style="width:52.41%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_d87cad8bcc57c.png"></figure><figure class="image image_resized" style="width:52.2%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_3c89542c443da.png"></figure>Please leave any comments/feedback as they would be greatly appreciated!

Raspberry Pi NAS Enclosure - Dual SSD 2.5"

needitmakeit

UPDATE 1 - There is a magnetic version available for the Original Rod Sloth (Rod Sloth Mag)UPDATE 2 - There is a 2 start version available for the Q1 or printer with 2 start threads (Rod Sloth- 2 Start)&nbsp;This is a tool that does an excellent job at cleaning your rod. It clamps snugly on the 8mm 3D printer or CNC leadscrew, you can remove your hands and let the printer do the rest of the work.This is meant to be used on any printer with a 8mm OD 2mm spacing, 4 start screw.<figure class="media"><div data-oembed-url="https://youtu.be/97mMNzwXf0o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/97mMNzwXf0o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>This print can be made on any printer from PLA, ABS or PETGPRINT SETTINGS<ul><li>Layer Height - 0.16</li><li>Walls - 4</li><li>Infill - Gyroid 35%</li><li>Btms - 4</li><li>Tops - 4</li><li>Cooling - Full (All Fans)</li><li>Print with a brim and a very small offset for better adhesion</li></ul>ENJOY!&nbsp;

Rod Sloth - Fits Most 3D Printers

Tools

Raka Prints

This is my take on the 3D calendar of the 2024 season of Formula 1.&nbsp;Everything is facedown for the Textured PEI sheet finish.Flags are printed on photo paper not normal paper so it shines more. You can find them in the pdf file.If you need the text/word file message me and I will send it to you.&nbsp;If you want to support me you can always buy me a coffee - <a target="_blank" href="https://www.buymeacoffee.com/rakaprint3d" rel="nofollow noopener">https://www.buymeacoffee.com/rakaprint3d</a> -Or use my eSun affiliate link or use my code “RAKAPRINTS” for 10% off.Aff. link: <a target="_blank" href="https://esun3dstore.com/?ref=RaKaPrints" rel="nofollow noopener">https://esun3dstore.com/?ref=RaKaPrints</a>&nbsp;Materials needed:Esun PLA+ Black, Red and WhiteFoam board (700mm x 1000mm)Double-sided tapeSuper glue&nbsp;&nbsp;Update:02/01/2023: Curb connectors Layout (PDF) added03/01/2023: Shangai changed to Shanghai04/01/2023: Added F1 template for glueing the track, flag, land and city.16/01/2024: Dates added (new print profile).13/02/2024: Added a new template for Country, city and date.

F1 Calendar - 2024

jr2142

This is a surface mount for the UniFi Doorbell Pro, if your are fortunate enough to have ethernet, but cannot or not allowed to cram the chunky PoE to USB C adapter into the wall. The lid is mounted with M3 screws and has been prepared for corresponding inserts. &nbsp;Hole measurements for threaded inserts are for <a target="_blank" href="https://amzn.to/3rnEmfQ" rel="nofollow noopener">Ruthex</a> M3 inserts and I also used their<a target="_blank" href="https://amzn.to/4625bVQ" rel="nofollow noopener"> ironing tips</a> (both affiliate links, buy via those, if you want to support my effort).

Guns 🔫

X1

Toys

Project

Home

PC

Tools

Mix

UNIFI