Orangehead

iczfirz

<div><h1>Summary</h1><div>Great model from Revennant.<a href="https://www.youtube.com/watch?v=kc3DjEcQK34&t=62s" rel="nofollow">https://www.youtube.com/watch?v=kc3DjEcQK34&t=62s</a><iframe src="https://www.youtube.com/embed/kc3DjEcQK34?start=62&autoplay=false" title="YouTube video player" frameborder="0" allowfullscreen="allowfullscreen"></iframe>Remixed to no base and almost support free. <a href="https://youtu.be/-M99N8JkQxQ" rel="nofollow">https://youtu.be/-M99N8JkQxQ</a><iframe src="https://www.youtube.com/embed/-M99N8JkQxQ" frameborder="0" allowfullscreen="allowfullscreen"></iframe>IronThrone_SupportFree_icz.stl (Need infill) IronThrone_SupportFree_NoInfill_icz.stl (No infill with sloped seat. Printed in timelapse)Subscribe to find out more support free 4K Time-lapse video: <a href="https://www.youtube.com/iczfirz?sub_confirmation=1" rel="nofollow">Subscribe Now!</a><a href="http://www.youtube.com/iczfirz" rel="nofollow">http://www.youtube.com/iczfirz</a> Addiction to 3D Printing? Watch these time-lapse! <a href="https://youtu.be/uNqqN5Ao_hI" rel="nofollow">https://youtu.be/uNqqN5Ao_hI</a> <a href="https://youtu.be/uNqqN5Ao_hI" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_ht9fx2z6djnb.jpg" alt="image"></a> <a href="https://youtu.be/-ZsXFX6hjXk" rel="nofollow">https://youtu.be/-ZsXFX6hjXk</a> <a href="https://www.youtube.com/watch?v=-ZsXFX6hjXk" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_jznkp874x8bk.jpg" alt="image"></a> <a href="https://youtu.be/3zdRgYUHfvU" rel="nofollow">https://youtu.be/3zdRgYUHfvU</a> <a href="https://youtu.be/3zdRgYUHfvU" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_q6942x2ibgic.jpg" alt="image"></a> <a href="https://youtu.be/L4IDmn3miE0" rel="nofollow">https://youtu.be/L4IDmn3miE0</a> <a href="https://youtu.be/L4IDmn3miE0" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_gorwhj5otmxp.jpg" alt="image"></a> <a href="https://youtu.be/vVaeYkDoaJU" rel="nofollow">https://youtu.be/vVaeYkDoaJU</a> <a href="https://youtu.be/vVaeYkDoaJU" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_yuffbnebg7l2.jpg" alt="image"></a> <a href="https://youtu.be/BnJKkmsqTt0" rel="nofollow">https://youtu.be/BnJKkmsqTt0</a> <a href="https://youtu.be/BnJKkmsqTt0" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_8k0fzq60qe7c.jpg" alt="image"></a> <a href="https://youtu.be/MUwXdUdHs64" rel="nofollow">https://youtu.be/MUwXdUdHs64</a> <a href="https://youtu.be/MUwXdUdHs64" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_u809hsyvwfxm.jpg" alt="image"></a> <a href="https://youtu.be/jKpW-CI5O6M" rel="nofollow">https://youtu.be/jKpW-CI5O6M</a> <a href="https://youtu.be/jKpW-CI5O6M" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_hw8ie2goqoea.jpg" alt="image"></a> <a href="https://youtu.be/H-HrquJrdEM" rel="nofollow">https://youtu.be/H-HrquJrdEM</a> <a href="https://youtu.be/H-HrquJrdEM" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_0ifpav8mm4kc.jpg" alt="image"></a> <a href="https://youtu.be/J8bSrSSTLVE" rel="nofollow">https://youtu.be/J8bSrSSTLVE</a> <a href="https://youtu.be/J8bSrSSTLVE" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_4wyoub0l8d6d.jpg" alt="image"></a> <a href="https://youtu.be/udcIfDywoIo" rel="nofollow">https://youtu.be/udcIfDywoIo</a> <a href="https://youtu.be/udcIfDywoIo" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_edl72grbnvot.jpg" alt="image"></a> <a href="https://youtu.be/XKDxQ8CsMJU" rel="nofollow">https://youtu.be/XKDxQ8CsMJU</a> <a href="https://youtu.be/XKDxQ8CsMJU" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_9f82r7w3wtos.jpg" alt="image"></a> <a href="https://youtu.be/H-_2R-mKoMo" rel="nofollow">https://youtu.be/H-_2R-mKoMo</a> <a href="https://youtu.be/H-_2R-mKoMo" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_j3ltz862zwl7.jpg" alt="image"></a> <a href="https://youtu.be/XyuQwsT36J4" rel="nofollow">https://youtu.be/XyuQwsT36J4</a> <a href="https://www.youtube.com/watch?v=XyuQwsT36J4" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_aoqgmhp5o57p.jpg" alt="image"></a> <a href="https://www.youtube.com/watch?v=qtqErycp1b8" rel="nofollow">https://www.youtube.com/watch?v=qtqErycp1b8</a> <a href="https://www.youtube.com/watch?v=qtqErycp1b8" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_krso4ybjz53q.jpg" alt="image"></a> <a href="https://youtu.be/lwuSK4M_dRs" rel="nofollow">https://youtu.be/lwuSK4M_dRs</a> <a href="https://youtu.be/lwuSK4M_dRs" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_mxfxcju98vuj.jpg" alt="image"></a> <a href="https://www.youtube.com/watch?v=MKl_LkOERvs" rel="nofollow">https://www.youtube.com/watch?v=MKl_LkOERvs</a> <a href="https://www.youtube.com/watch?v=MKl_LkOERvs" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_m0bit0jdn5w4.jpg" alt="image"></a> <a href="https://youtu.be/5WOnIP-qwVk" rel="nofollow">https://youtu.be/5WOnIP-qwVk</a> <a href="https://youtu.be/5WOnIP-qwVk" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_tf6yir1zmmkc.jpg" alt="image"></a> <a href="https://youtu.be/RLnsV9CKTNU" rel="nofollow">https://youtu.be/RLnsV9CKTNU</a> <a href="https://youtu.be/RLnsV9CKTNU" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_6tvqs0qg42cz.jpg" alt="image"></a> <a href="https://youtu.be/9w7k7XRm34Q" rel="nofollow">https://youtu.be/9w7k7XRm34Q</a> <a href="https://youtu.be/9w7k7XRm34Q" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_texjnjqac62f.jpg" alt="image"></a><a href="https://youtu.be/uxLFw1A8tTA" rel="nofollow">https://youtu.be/uxLFw1A8tTA</a> <a href="https://youtu.be/uxLFw1A8tTA" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_4hqiiu04igak.jpg" alt="image"></a> <a href="https://youtu.be/F1pj7ACaZ70" rel="nofollow">https://youtu.be/F1pj7ACaZ70</a> <a href="https://youtu.be/F1pj7ACaZ70" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_6ix5qem1u0a3.jpg" alt="image"></a> <a href="https://youtu.be/tbOhFjlpp0c" rel="nofollow">https://youtu.be/tbOhFjlpp0c</a> <a href="https://youtu.be/tbOhFjlpp0c" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/441681/2024-01-07_pgzxiq1nyzqn.jpg" alt="image"></a> </div></div>

Iron Throne Support Free Remix

MOVIES 🎥🎦📷📸📹🦸🏽‍♀️🎦🎦

Rober7Crow

Since the users were happy and there were some suggestions,I decided to look into it a bit more and make some improvements.&nbsp;-the possibility of taking one tablet a day-the possibility of taking two tablets a day-larger size and easier accessibility-smaller version available-no more lifting and no mixing of the smaller tablets inside box-when you turn the knob for the first time, the cover locks and is released when the refill appears again-more reliable stopping at the right position and a click appears&nbsp;If you take the tablets once a week you will refill every other week, if you take them twice you will refill once a week.Below is a picture of how it is assembled, only the handle sticks.&nbsp;Update:22.04.2024 added profile for a small box22.04.2024 added new cover in English language22.04.2024 added new cover in English no AMS language22.04.2024 added new cover in Slovenian language23.04.2024 added new cover in German, French, Czech language23.04.2024 added sample cups for size testing24.04.2024 corrected Wednesday from WEN to WED, a troll came to my place to play tricks on me24.04.2024 added print profile for level 1 with markings25.04.2024 added new design for the base 26.04.2024 added new cover in Spanish language26.04.2024 reinforced locking knob27.04.2024 added new cover in Bosnian language13.05.2024 added new cover in Russian language20.05.2024 added new cover in Turkish and Finnish language25.05.2024 added new cover in Polish language&nbsp;Old version:<a target="_blank" href="https://makerworld.com/en/models/174640#profileId-192020" rel="nofollow noopener">Weekly pill dispenser by Rober7Crow - MakerWorld</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433967/design/2024-04-18_15534c10fda21.png"></figure>

One Click weekly pill dispenser V2.0

HEALTH & AID 💉🩸🚑💊🩹🧬🔬👩🏼‍⚕️⛑️

Anheba

Hii, I&#39;ll show you how I tried to waste less filament in my multicolors prints, and convert part of the poop to something functional.&nbsp;Fist of all, you are going to need a gun for glue sticks, and measure the diameter of the stick. In my case around 7mm of diameter<figure class="image image_resized" style="width:32.95%;"><img src="https://makerworld.bblmw.com/makerworld/draft/807540/2024-04-02_7b3f82fb51b58.png"></figure>&nbsp;After that, you are going to need a multicolor print that you want to waste less filament, for example these voodo toy: <a target="_blank" href="https://makerworld.com/en/models/127942?from=recommend#profileId-143982" rel="nofollow noopener">https://makerworld.com/en/models/127942?from=recommend#profileId-143982</a>And we are going to include the model with the glue stick attached<figure class="image image_resized" style="width:55.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/807540/2024-04-02_8bc3d50adf8c58.png"></figure>&nbsp;We are going to check the size of the stick to be coincident with the diameter of our real stick, and the hight with the multicolor figure. Remember unmark the uniform scale:&nbsp;<figure class="image image_resized" style="width:53.15%;"><img src="https://makerworld.bblmw.com/makerworld/draft/807540/2024-04-02_66697e3e453d1.png"></figure>You are going to check with the right button to the stick and mark the option to purgue in the object. Then multiply the number of sticks to waste less filament as poop:<figure class="image image_resized" style="width:40.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/807540/2024-04-02_a1d48280a1f7.png"></figure><figure class="image image_resized" style="width:40%;"><img src="https://makerworld.bblmw.com/makerworld/draft/807540/2024-04-02_7a3227b6a37e28.png"></figure>And Finally you can print it and use it in your glue gun.&nbsp;&nbsp;Additional notes:<ul><li>Not all the models of glue gun works fine for these porpouse. Some of them are limited in the amaunt of heat</li><li>I use too for the final of the filament roll, if I only have like 5 meters or somethink</li></ul>

Glue gun stick for AMS purge 

purge

Maltiz

it is a case for ciggarettes or similar

Case for Broccoli-Cigarettes or similar

Smoking

emmaginn

<h2>Palm Planter with Hidden Drip Tray</h2>This one has definitely taken me the most time to complete and is definitely my all-time favorite so far. The one in the photo is the 4 in. container size. I&#39;ve also included a print profile for 5 in containers. Hope you like it as much as I do!&nbsp;Printing - I was able to print it without support on the sides with no problem. You will still need supports on the bottom of the top part and on the bottom part to support the tabs.&nbsp;Commercial Licensing: <a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Patreons</a> also have the opportunity to use commercial licenses for their own creative projects, adding versatility and potential income streams.&nbsp;If you like this, please be sure to check out my <a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Patreon</a> where I upload many of my designs exclusively for members. Hope you like them!&nbsp;<figure class="image image_resized" style="width: 58.75%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000247294/design/2024-06-04_ca8fd50862ce2.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Alba Planter with Hidden Drip Tray</a>&nbsp;<figure class="image image_resized" style="width: 59.62%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000247294/design/2024-06-04_b0428e6109878.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Bamboo Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 57.27%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000247294/design/2024-05-06_43c269eba0e6.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Stacker Planter/Vase with Hidden Drip Tray</a>&nbsp;<figure class="image image_resized" style="width: 58.89%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000247294/design/2024-05-02_c4986346dbaf9.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Rivers Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 58.58%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000247294/design/2024-05-02_ac819f1c0e73c.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Slice Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 55.7%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000247294/design/2024-05-02_351443b9c636b.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Ripple Propagation Planter with Stand</a>

Palm Planter with Hidden Drip Tray

KITCHEN/BATHROOM 🚿🛀🏽🚽🧽🧼🧻🔪🍾☕🚰

Gunslinger_208

These decorative butterflies are easy to print and can be shaped using some hot water if printed in PLA. The first layer is only 0.2mm thick so should be semi-translucent depending on the filament colour used.Please post pictures if you make these. I'd love to see them in more colours.

Butterflies

INSECTS

kjcaissie

SUICIDE AWARENESS

AWARENESS AND HISTORY OBJECTS 

Jamboodle

Easter Bunny candy dish set shaped like Peeps candy. One short fat dish and one long and narrow. Printed in Lavender, Pale Blue, and Mint Green. Overture Black used for the eyes.&nbsp;Please give it a like and check out my other projects: <a target="_blank" href="https://makerworld.com/en/u/2300808475" rel="nofollow noopener">Jamboodle</a>&nbsp;Thanks for looking and Happy Printing!

Peeps Easter Bunny Candy Dish Set

BOWLS 🥣🍜🔐🗝️🍇🍌🍊🥣🍬🍭

Turbospeed

I divided this design into two cards, A & B, so it can also be printed on the A1 Mini. No AMS is needed since it is a single-color print. The overall size of the velociraptor is about 145mm tall once assembled. Each piece is about 1.3mm thick to give it a snug fit. Follow this cheat sheet below to help assemble the puzzle:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/637518/2024-03-04_e82c1c9ff16ab.png"></figure>Some tips:<ul><li>Make sure to check the feet, #35 & #38 slots should be pointing towards the inside or it won't be able to stand. Check the pictures for reference.</li><li>If you get stuck, try to assemble it in parts; head, legs, and neck separately.</li><li>Slow down your print to reduce stringing if your filament is not calibrated</li></ul>&nbsp;I will be adding a larger version as a secondary profile so make sure to follow.

Velociraptor Kit Card

DINOSAUR 🦖🦕👣🦖🦕

vorkosigan78

This is a simple and convenient frame for displaying your favorite TCG cards. It fits standard US cards such as Pokemon and Magic the Gathering (MTG). The cards should be stored in a toploader (such as ultra pro), and can quickly slot in and out from the top.&nbsp;The front and back of the frame snap together, and then the frame fits snuggly in the base. Note that the frames will be tight, start from the top and work down. You may need to flex back piece a bit to get the assembly together. There is an optionally removable shim in the bottom of the front frame. This is in case you are using a toploader with a larger bottom edge. You can bend the shim towards the opening to loosen and remove it.&nbsp;Please also check out my terastallized version of the frame, with 3D embossed design! <a target="_blank" href="https://makerworld.com/en/models/388591#profileId-289424" rel="nofollow noopener">https://makerworld.com/en/models/388591#profileId-289424</a>&nbsp;<figure class="image image_resized" style="width:39.26%;"><img src="https://makerworld.bblmw.com/makerworld/draft/748875/2024-03-22_3f78867a78c6e.jpg"></figure>

Toploader Trading Card Frame with Stand - Pokemon

DISPLAY STANDS / CASES 🃏🖼️🔲

Madness97

A fake thumb tip to perform vanishing tricks and other sleight of hand numbers.Best result if printed with flesh-like filament color.&nbsp;If you enjoy this model, feel free to follow me and leave a like&nbsp;Happy printing!

Fake Thumb Tip

Magic

Kutnohormac

<div><h1>Summary</h1><div>A beautiful minimalist painting of a Nefertiti on the wall.</div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender-3 S1 Pro</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0,2 mm</div> <pre><code> Infill: <div>15 %</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=-+PLA" target="_blank" rel="nofollow noopener">PLA </a><pre><code> - Notes: <div>Top/botton pattern - concentric</div></code></pre></div>

Nefertiti wall decoration

CULTURE & ETHNICITY'S 🇪🇬🕌🧕🏼🐪🐘🎎👩🏽‍🤝‍👨🏼🗺️

Dr Operator

This is a multi part print that I designed before I bought my Bambu, and I will be uploading an all-in-one version in the future as well.&nbsp;&nbsp;I initially started out making a set of print-in-place tank treads and it ended up as a print-in-place axles/frame/rims so I ran with it and designed a Mystery Machine around them. The rims allow for a hubcap to be attached but they don't need one to function. This was also my first time using TPU for tires and I designed them to slide over the bump on the rims. All assembly photos show the rims for TPU tires.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/2c8e0156-7fc8-4250-8b67-baaa7a1f01c0/thumbs/cover/800x238/png/image.webp"></figure>&nbsp;&nbsp;&nbsp;I have also included a set of “regular” axles if you want to print the tires in something other than TPU. These axles don't have the bump on the rims and the tires just slide right on.&nbsp;<figure class="image image_resized" style="width:64.82%;"><img src="https://media.printables.com/media/prints/517710/rich_content/a257838c-95b4-4ae7-9ace-2da3a083daf1/thumbs/cover/800x478/png/image.webp"></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;PRINTING:<ul><li>Everything was printed in PLA except for the tires. They are TPU.</li><li>There are two sets of axles. One for use with TPU tires and one for use with PLA/PETG tires.</li><li>Panels.stl will require a filament change from Green to Orange.</li><li>If you see [x2] or [x4] in the name of a part, then you'll need to print that amount of the part.</li></ul>&nbsp;ASSEMBLY:&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/0ef1c27d-d155-407d-ad62-fd0dd0439d7b/thumbs/cover/800x534/png/image.webp"></figure>&nbsp;&nbsp;The first thing I would suggest doing is to attach all of the flowers and door handles to each corresponding plate/hubcap. I used glue to secure all flowers and handles, even if the fit was nice and snug.  Tire Flower.stl fits into Front Plate.stl as seen below.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/6b8a930e-8b1f-4da7-92e7-f5b2b00c44da/thumbs/cover/800x225/png/image.webp"></figure>&nbsp;&nbsp;Next, take Right Plate.stl, Back Right Flower.stl, Front Right Flower.stl and Right Door Handle.stl. Attach all as seen in the pictures below. Repeat the steps for the left side and put them off to the side for now.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/199f1cb4-d0f8-43f7-873b-dc71bdd7b6b3/thumbs/cover/800x516/png/image.webp"></figure>&nbsp;&nbsp;Hubcap Flower [x4].stl fits into Hubcap [x4].stl as seen below.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/f4557b53-ade1-4bb6-ae5b-33d6ad64640c/thumbs/cover/800x288/png/image.webp"></figure>&nbsp;&nbsp;Once the glue has dried on your hubcaps, grab the tires and rim/axle assembly. I would suggest putting the tires on the rims first and then fit the hubcaps on as seen below.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/3d0d3c11-46a2-45d0-87cc-b27fdb72a670/thumbs/cover/800x176/png/image.webp"></figure>&nbsp;&nbsp;Next, take Body.stl and attach the windows and windshield as seen below. Again, even though the windows fit nice and snug for me, I used a spot of glue to keep them in place.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/f034381d-2346-4b16-aae0-25f93f41a0ea/thumbs/cover/800x252/png/image.webp"></figure>&nbsp;&nbsp;Next, take Headlights [x2].stl and Fog Lights [x2].stl and attach them to the body.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/8a567fad-cdb9-426d-b941-a564e4de65cf/thumbs/cover/800x277/png/image.webp"></figure>&nbsp;&nbsp;And then the Tail Lights [x4].stl as seen below.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/6a383dc5-3e01-4dc4-a49f-754cc81ecc97/thumbs/cover/800x244/png/image.webp"></figure>&nbsp;&nbsp;Rack [x2].stl fits into the top of Body.stl as seen below. These are one of the only things that I didn't end up gluing.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/d51f28ff-5776-4743-b737-8b57169b3440/thumbs/cover/800x399/png/image.webp"></figure>&nbsp;&nbsp;The bumpers fit onto the body via a dovetail joint. They only fit on one way so it should be easy enough.<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/e29a5521-dbdc-425b-a796-68ebd9bd6ef2/thumbs/cover/800x214/png/image.webp"></figure>&nbsp;&nbsp;Next, you can snap the completed wheel assembly into place. It doesn't matter which way you attach the wheel assembly, there is no front, back, top or bottom to it and it will attach to the body any way.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/c3fb4c02-b91f-4e65-9b3e-f7edd7a6ef0e/thumbs/cover/800x354/png/image.webp"></figure>&nbsp;&nbsp;Once you have the wheels on, grab the Back, Front, Left and Right Plates and attach them as seen below. Again, I would suggest using glue to secure, even though the fit is snug.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/8c176302-a376-4cd8-94e9-70b6251bb97f/thumbs/cover/800x224/png/image.webp"></figure>&nbsp;&nbsp;Then attach your panels.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/31741957-c36e-4c63-b12b-92246987ff66/thumbs/cover/800x292/png/image.webp"></figure>&nbsp;&nbsp;Lastly, attach the door handles to the back of the body and the mirrors to the front.  <figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/3c134905-aa19-4ce9-9fc9-f2144a25d2c6/thumbs/cover/800x236/png/image.webp"></figure>&nbsp;&nbsp;And that's it, you're done. Thanks for reading and happy printing.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/1bd13046-6154-4f3a-8b15-1541e99edb5e/thumbs/cover/800x586/png/image.webp"></figure>

Mystery Machine

TV shows 👩🏽‍🤝‍👨🏼🎎🤼‍♀️👵🏽🧽🦜🐕🐾📺🎥📹

RETIRED GUY 3D PRINTING

Requested from a friend ,asking to have a different version of the dragon standPresenting CRYSTAL DRAGON ARTICULATED DRAGON/SNAKE STAND V2Model is created only using TinkerCadNo supports3mf print file prints awesomeThanks for looking and supporting The Retired 3D Print Guy

CRYSTAL DRAGON ARTICULATED DRAGON/SNAKE STAND V2

STANDS for decorations

Filionix3D

Take shape of your dragon by moving each joint and create your magical creature. Make sure to have a well-calibrated printer for better accuracy. Enjoy discovering the magic of dragons with this unique puzzle!Note: Make sure to print everything at a resolution between 0.16 / 0.12&nbsp;Feel free to print Arachna the robot spider, discover it on my profile: <a target="_blank" href="https://makerworld.com/en/@Filionix3D" rel="nofollow noopener">https://makerworld.com/en/@Filionix3D</a>

Robot Dragon Articulated Puzzle

PUZZLES🧩🧩🧩

Toxvaerd

Jellyfish model

OCEAN 🌊🐙🐠⛵🦞🦑⛴️🏄🏽‍♀️🚣🏽‍♀️🤽🏽‍♀️

Kit Crafters

This is a minimal, but sturdy, stand/display for Mechanical Keyboards. It should fit any sized keyboard well and is plenty sturdy, even with PLA.&nbsp;A friend of mine asked me to print a keyboard stand for them in a stronger material because the ones they were gifted kept breaking. I found that the issue wasn't because the PLA was weak but because the design was flimsy so I designed a new stand for them that is much more sturdy while still being printed in PLA. I hope this design works well for you too!&nbsp;The keyboard in the image was a gift from a friend, the NK65 Olivia Edition.

Minimal Sturdy Keyboard Stand

Computer

h3li0

desk organisercreated in fusion 360&nbsp;photo shows printed in Grey PLA, Black PLA-CF and Red Matte PLA, there are individual plates on the 3mf separated by colour<ul><li>0.20mm layer height</li><li>15% gyroid infill</li><li>no brim or support</li><li>plate1 - base (fuzzy skin is enabled on the base to add texture - you can disable on the object options if you prefer a smooth finish)</li><li>plate2 - red modules</li><li>plate 3 - black modules</li><li>plate 4 - grey modules</li></ul>this is the base version, where the modules are simple containers, in the future i&#39;ll be publishing different modules, i.e for SD cards / USB thumb drives ; different size / configuration modules&nbsp;will link here in the description as the modules get developed and published&nbsp;If you enjoy using this 3D model and are able to, please consider supporting my work by <a target="_blank" href="https://www.buymeacoffee.com/h3li0" rel="nofollow noopener">buying me a coffee</a>. Your contribution goes a long way in fueling future creations. Thank you for being a supporter!&nbsp;note: all photos uploaded are of the actual printed model, taken inside a lightbox or in natural light on top of a desk / table&nbsp;

desk organiser · modular

FOR LUIS 

Kmaus.

Thank you for printing my models. It means very much to me!Some 3D printed models from this community have put a much-needed smile on my face on some days. So I hope I can make my contribution and delight you with my creations.If you like it I would be happy about a like or make to see your prints.&nbsp;buy me a coffee: paypal.me/kmaus321thank you :)

Baby Turtle

REPTILES 🐢🦖🐸 🐍🐊🦎

GoodLife 3D Prints and Engravings

Angel Paw Print

Life

TripleGWorkshop

Get the whole set!> <a href="https://www.printables.com/@TripleGWorkshop/collections/655985" rel="nofollow">https://www.printables.com/@TripleGWorkshop/collections/655985</a><figure class="image image_resized" style="width:94.44%;"><img src="https://makerworld.bblmw.com/makerworld/draft/120213/2023-10-26_bafjltirnyjm.jpg"></figure>&nbsp;

⌇⌇⌇ Mesmerizing Vase Set - Wavy

VASES 🏺⚱️🌱🌻🌷🌿🍯🧺

Faran3D

Jack Skellington Full Head Mask&nbsp;This mask has full head coverage consisting of a front and back half which uses a bit of elastic strap for the top hinge and includes two hooked side pins which slide on one side and then swivel into place to connect the front and the back together. There are large eye holes which allow plenty of ventilation to breathe, but will allow your face to be seen - I wore a black full face/head mask but you can glue buckram or mesh over the holes instead.&nbsp;Supports for the face are unavoidable, but I was able to print the back with no supports. It had some stringing so if you want a perfect print please add supports.&nbsp;You may notice that the mask is hand painted in the photos, and that's because I didn't have an AMS at the time. I have now painted this for a two color print have made this AMS print available. If you want a single color print and happy to paint the black yourself, go for it!&nbsp;Please see my other uploads for the Bat Tie to go with this costume, and I will look into adding the bone skin I had to modify to make the articulated finger extensions fit properly. We also have a full head Pumpkin King mask which I'll upload soon!&nbsp;Please like and tell your friends about this design. If you would be so kind as to share your results, I'd love to see how you got on!As always, please rate this print so others know how awesome it is :)&nbsp;If you'd like to buy me a coffee to support this and future projects, I'd really appreciate it!  https://www.buymeacoffee.com/faran3d

Jack Skellington Full Head Mask - Nightmare Before Christmas

MASKS 🎭👺👹🥽🤖👽🎃☠️🤡🌜🌞🦁

lindnjoe

Warning!! This takes patience to put together. Round Deer and Snowman Lantern with 3 thin layers that fit into a base. The layers have tabs on the bottom that fit into the slits on the base. The front layer with the snowman and deer is printed in two parts, you will need to put those two layers together to make one. The layers are printed very thin at 0.2mm. Be careful when taking them off the heat bed. Slide the tabs on the end into the slits on the opposite end.You can size up or down. For best results size up.I recommend a dab of glue on a couple tabs per section to hold the round layers to the base.3 Layers to print and 1 base. &nbsp;A tea light will sit in the middle. You need patience when putting this together.

Deer and Snowman Round Lantern

XMAS 🎅🏻🎄🦌⛄🎁💝👼🏻❄️🌬️🎀🎉

Jnholeman

This was a lot of fun to design. You can purchase the night light parts on amazon to complete this project. &nbsp;3 color design and ready to print with your AMS

Flamingo MCM Night Light Multi-color with AMS

LAMPS 💡🚨🛋️🔦🕯️💡🚦🏮⚡

Dayrusher

<h3>Description: Version 2 </h3>Connect 4 3D: Stack beads on 16 pins, win by making 4 in a row. Easy to print. Sturdy. 2-4 players. Fun for all! Please note that this version 2 of the game is not compatible with the previous version 1, except for the beads, which can be used in both versions. Enjoy the upgraded experience with the new secure lid and improved printability.New Features in Version 2.0:<ul><li>Introducing a convenient secure lid with a screw, perfect for easy transport and storage. No more worries about moving the game around!</li><li>Improved printability. The baseplate is now unified, and only the pins come in various sizes/tolerances. Included in the files is a test print with all pin sizes, ensuring the perfect fit for your printer. </li></ul><h3>How to Play:</h3><ol><li>Setup the game board by placing the pins on the board. There are 16 pins on which up to 4 beads can be stacked vertically.</li><li>Decide how many players will play (2-4) and assign each player a color.</li><li>The players take turns placing a bead of their color on the board.</li><li>The game is won by the first player who successfully creates a row of 4 beads of their color either horizontally, vertically, or diagonally.</li><li>If all pins are filled and no player has won, the game ends in a draw.</li><li>Players can stack up to 4 beads on each pin, creating the potential for multiple rows to be formed in a single move.</li><li>In the case of multiple rows being formed simultaneously, the player who placed the last bead to create a row wins. </li></ol><h3>Examples: Gold wins in this examples. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000141243/design/25041975-4ea0-4650-ab38-7a8dc35b0649.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000141243/design/1792ab9e-0c3f-49d0-bcdd-78bd4ff851bb.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000141243/design/16d14bf0-d14a-4495-99da-3cc7b474cd9b.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000141243/design/ff807d9d-e90a-4cc3-bd4a-f6e6d5e4c2f1.jpg"></h3><h3> </h3><h3>Parts to print: </h3><ul><li>1x baseplate</li><li>1x Secure Lid</li><li>1x Screw</li><li>16x pins</li><li>64x beads </li><li>2 players: 32 per colour 3 players: 22 per colour 4 players: 16 per colour </li></ul><h3>Print instructions:</h3><ul><li>Layer height: 0.2mm</li><li>Infill: 15%</li><li>No supports required</li><li>Minimum of 3 perimeters for the pins </li><li>Please print the &#34;base&#34; first, followed by the &#34;Pin_all&#34; test print, and test which tolerance allows the pin to be threaded in easily but tightly. </li><li>Depending on whether you want the option to disassemble the game or if the pins should be permanently &#34;pressed in&#34;, adjust the tolerance accordingly. </li><li>If the pins are too loose, the game may be unstable or fall apart easily. If the pins are too tight, they may be difficult to insert or remove. Use the testparts! </li><li>For the Secure Lid you need to change settings under Print&gt;Infill&gt;Advanced&gt;Bridging angle. Zero is automatic but you need to set it to 45. (If you load the .3mf as a project, it&#39;s already changed) </li><li>Please don&#39;t worry about breaking a pin while setting up / playing the game, as you can always push the stuck part out from the bottom through the hole. So feel free to play without any fear! </li><li>All parts are pre-oriented. </li></ul>

Connect 4 3D *Version 2* - Board Game

BOARDGAMES 🕹️🎲🎯♟️🧩🧙🏻‍♂️🧝🏻‍♂️👪

Martin Kozak

<h3>Print instructions for frame</h3>To achieve wider range of movement, I had to modify 4 pieces of frame parts. Don't forget to print them. Rest of the frame parts are the same as the original DUMMY 13. It is recommended to print frame from PETG.<h3>Print instructions for armor</h3><ul><li>0.2 mm, 3 perimeters</li><li>Parts are pre-oriented to the printbed.</li><li>Some armor parts require supports. Namely: armor_helmet.stl, armor_hip_left.stl, armor_hip_right.stl, armor_chest.stl, armor_knee_left.stl, armor_knee_right.stl, armor_visor.stl</li><li>For your convenience, use provided 3mf files with all the necessary parts and settings for Bambu</li></ul><h3>Assembly</h3>For assembly, please follow <a target="_blank" href="https://photos.app.goo.gl/4J47inFht7c7vTq69" rel="nofollow noopener">BUILD GUIDE</a>. Some steps are slightly different from the original. Note: kneepads might use a drop of glue to hold better in place.

Medieval full plate armor for DUMMY 13

FIGURINES👨🏻‍🎤🎸💀👂🏻🦾💃🏻🧔👨🏻‍🚒🤴🏻🧙🏻‍♂️🧝🏻‍♂️🦸🏻‍♂️🏄🏻‍♂️

Z3Dartandtech

There are two version of the base, one with my logo and one without.The tolerances for my mk3s are perfect, i don't know for other printers, but you can resize only the base and will be ok&nbsp;No support needed&nbsp;

18 Markers holder

ART SUPPLIES 🎨🖌️ 🧰✏️🖇️📐🛠️👩🏽‍🎨

Iguanahotsauce

The original model for these awesome stackable storage bricks that are 5:1 scale of the original brick-inspired organizers they were built from was awesome but I found myself wanting other sizes but there were only 2x2x1 and 2x4x1 available.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/makingwithmakers" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;I appreciate any support whether it's just a like an download or if you buy me a coffee (I drink a lot of coffee so anything helps haha)&nbsp;I remixed the model and made it fully parametric so you can make any size brick stackable desk box you want!&nbsp;In the raw model files section you will find the f3d file which will allow you to open the file in Fusion 360 and change the parameters to make whatever brick stackable desk box you want.&nbsp;I've also included 3mf files for every size from 2x2x1 all the way to 6x6x3 which is the largest size that will fit on an A1/X1/P1 printer (But if you happen to have a large format printer such as a Neptune 4 Max you could go all the way up to a 10x10x12!)

Parametric Brick Stackable Desk Boxes

KIDS ROOM 👧🏻🧒🏼 🪀🧮🧸🎮🃏🧩🏸🏑🎲

Ukdavewood

Update 16/5/24 - Added short instruction video&nbsp;Update 15/1 - Added circular threaded leg and rounded corner and edges option - see seperate print profile.<figure class="image image_resized" style="width: 47.74%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-15_395de0893b5748.jpg"></figure>&nbsp;&nbsp;Extendable Multi Part Real Table Model - that was primarily designed as something useful to create instead of Flushing purge waste spirals when doing multi colour prints on a Bambu Lab or other multi colour printer.&nbsp;The original idea for creating useful things out of flush/purge waste was inspired by the 3d Printing Professor youtube channel.&nbsp;The sizes of the parts are similar to Ikea Lack table thicknesses - i.e. 50mm&nbsp;This is a major print project with a minimum of around 40 major parts about 60 smaller joiner parts - which if printed single colour (or efficient multi colour) would take around 2d14h printing time and 2.25kg of filament for the basic size table.&nbsp;Also useful as something to use up odd short lengths of filament or old brittle rolls of filament.&nbsp;There are a basic minimum number of parts needed to produce a small table appx 40cm Long x 30cm wide and 30cm high.&nbsp;But then as more parts are printed the table size can be expanded in all three dimensions - by simply slotting in more parts.&nbsp;Parts are joined firmly together with Springy dovetail joiners (inpired from the Slant3d channel). The joints are pretty tight - so a small hammer is recommended to push them in.&nbsp;The joining method may be refined in the future and extra parts will be added to allow greater strength when the table gets larger.&nbsp;Also other designs - such as shelves and enclosures will be made available.&nbsp;The primary recommended way to print the parts is by adding the individual STLs to other multi colour 3d model plates - with flush-into selected. This will only work if a small prime-tower is left on.&nbsp;Many of the parts can either be scaled or sliced on the Z axis to make them the correct height to match the colour changes of the donor multi coloured 3d model being printed. Often with careful selection and scaling of parts it is possible to get flush waste down from 100s of grammes to less than 1g.&nbsp;It is technically possible for the selection of parts and scaling process to be automated at some point in the future.&nbsp;For any parts printed seperately out of waste filament it is recommended that the colour is changed either in the slicer, or via cutting the filament and changing coloured regularly in the AMS as it prints. Most of the example model parts were produced this way.&nbsp;An assembly instruction video will be made available at some point. -&nbsp;Historical background info and tracking of ongoing developments available here <a target="_blank" href="https://forum.bambulab.com/t/making-better-use-of-flush-into-object-in-bambu-studio/29422/5?u=ukdavewood" rel="nofollow noopener">https://forum.bambulab.com/t/making-better-use-of-flush-into-object-in-bambu-studio/29422/5?u=ukdavewood</a>&nbsp;NB/ Only one test print done so far as doing lots of reprints kind of goes against the ethos of this filament waste reduction model.&nbsp;For the ‘sliceable’ objects - to reduce their height in BS simply cut on Z axis below any horizontal features (but leaving enough of the part for joiners to still fit in).&nbsp;To increase the height - again use cut in BS - below the horizontal features (at 20mm for example), specify ‘cut to parts’ - then in the object browser locate the bottom part and scale it up on the Z this should also lift up the top half.&nbsp;&nbsp;<figure class="image image_resized" style="width: 59.96%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-12_56bb34c4d349b8.jpeg"></figure>&nbsp;Scalable objects do not have any special horizonal features - so can simply be scaled up or down on the Z axis only.<figure class="image image_resized" style="width: 60.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-12_636dc20582b72.jpeg"></figure>&nbsp;<figure class="image image_resized" style="width: 62.46%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-12_eb44cd7516818.jpeg"></figure>&nbsp;&nbsp;For illustration purposes - if all of the parts with cloned in the correct proportions for a minimum size table and the table was printed directly, rather than as flush-into object then it could be printed in 3 build plates as per the below - 3mf file not uploaded due to requirement for print profiles to have passed print tests. Total print time around 2d14h and filament about 2.25kg.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-12_083fef5cc87d3.png"></figure>&nbsp;Basic steps I usually take to minimise flush volumes.&nbsp;To reduce purge waste the basic steps I take are: 1. Model orientation/numbers/sliceup - if possible orient the model in such as way as to minimise the number of colour changes per layer, also consider doing multiple copies of the same or similar models together to reduce waste per model.Finally in some case you can save a lot of waste with some simple slicing up of the model into smaller parts that print more efficiently and can then be joined back together after printing. 2. Optimise flushing volumes - using the button in BS above the filaments. Personally I usually set the Multiplier to 0.5 or 0.6 and press re-calculate 3. Reduce the size of the prime tower - Under Process - press Global, then in the &#39;Others&#39; tab - on my setup I current set Prime Tower width and volume to 10mm 4. Now preview the slicing to see how Flushed Waste you will be getting compared to the Model. 5. Now if there is space on the build place as a few Colour-doesn&#39;t-matter objects onto the build plate - such as component parts of this Purge Waste Table. Look at where in the multi colour model the colour changes occur - and if possible change the heights of the Purge Table parts to match the same layers (as the top surfaces are better at absorbing purge than the middles).  6. Right click on the added objects and select Flush Options, Flush into this object. 6. Re-Preview to see if the Flush volume has gone down - I tend to target getting the volume down to less than 1g 7. Keep cloning or adding more objects repeating the above steps until you have reduced the Flush volume down to acceptable levels. I appreciate that adding the flush-into objects is out of the box a fairly manual process - and I am working on some scripts to automatically select the best objects and the best heights for each print and also optionally to remove the prime tower from the GCode.&nbsp;I am hopeful that at some point BL will add this sort of functionality into Makerworld or Bambu Studio.&nbsp;updated June 24 - added 4 extra channels to table to increase size by 80% using mostly waste purge.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-06-09_8af12b1fe8591.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-06-09_a63a066e60d938.jpeg"></figure>

Purge Waste Table V1

LOOK INTO?? 👀👁️🕵🏻‍♂️

akristofic

Just cake topper i made from online picture i found…

Harry Potter cake topper

BIRTHDAY 🥳🎁🎂 🎉🥂🍸🥤🎀🕺🏻🤡

Joe Wilson

This is a Middle finger saber, it telecsopes out with a middle finger on the endthis is printed in 2 pieces, the middle finger as one piece and the telescopign part as the otherthe middle finger screws on with a thread

Middle Finger Saber collapsible/telescoping middle finger 

FUNNY & MISC.  😄😜🧰🗃️🎭

Ace3DPrints

Here is another great flexi model, this time I made this cool flexi alien. please print and share the prints, I did not had any green color to print but you can change white with green and this will be fire!! would love to see your prints. No support, no brim need it! Enjoy

Flexi Alien

ALIENS 🌌🚀👨🏻‍🚀🛰️ 👽 👾 🛸

CherrysCollection

With 2 separated compartments as in the pictures.Multifunction storage box can be used to organize stationery, makeup, pens, keys, remote controls or other little things.Organizes your desk, save space and time for yourself.&nbsp;No supports required.&nbsp;Open for suggestions and feedback.&nbsp;Happy Printing!

Multifunction Storage Box

STORAGE BIN 🗃️🗑️🚮🗄️🖇️🖊️✏️🧰📥📪

Prestige Prototype

Introducing the Mid Century Modern Planter:Transform your green space with our Mid Century Modern Planter – a masterpiece of minimalist design and modern aesthetics. This easy-to-print model seamlessly blends sophistication with simplicity, offering a touch of timeless elegance to any environment.Crafted for both form and function, our planter boasts a watertight design to make plant care a breeze. No need to worry about excess water – we've included a seamlessly integrated plate that effortlessly catches overflow during watering. Experience the perfect harmony of style and practicality as you bring this sleek planter to life in your 3D printing projects. Elevate your plant game with our Mid Century Modern Planter – where beauty meets functionality.

Mid century modern - Medium Planter

PLANTS 🌴🌵🌺💐🌻🥀🌿 ☘️🌳

maegu_

Wall Art - Home Sweet Home&nbsp;

Wall Art - Home Sweet Home

WALL ART & DECOR 🦀🐾🖼️🎨 🌛🌴🌺🌞🌌

Concord3D

– Ghost companion from Destiny fully printable without AMS –<ul><li>Snap fit assembly so some force will be required to have a solid feel post printing</li><li>horns printed with 4-5 wall loops to avoid light leakage on lighter colored filaments</li><li>easy support removal</li><li>Stand included</li></ul>This was made as a Christmas gift for my brother after a few months of on and off design, while I haven't played the game in a few years I hope you enjoy my (hopefully) faithful recreation of the model. It was made to be snap fit with an optional push in emblem as well as an AMS useable model for the core of the ghost. If you make any cool color combos, please leave a comment with a picture so I can see! Happy printing!Note *This is a fan made model not a licensed bungie product

Destiny Ghost

VIDEO GAME 🧝🏻‍♂️🦸🏻‍♂️🎮⚽🏎️🎳🏓🏒

grecdel

Hi everyone&nbsp;This is my first contribution to makerworld.A Spiderman's portrait worked on HueForge.&nbsp;<ul><li>Bambu Lab Black to layer #5</li><li>Bambu Lab Red to layer #12</li><li>Bambu Lab Blue to layer #18</li><li>Bambu Lab White to layer #24</li></ul>&nbsp;Enjoy!

Spider man (HueForge)

COMIC & HEROS 🦸🏻‍♂️💥💫🦹🏽‍♀️🦸🏽‍♀️🦸🏼

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm200mm x 200mm&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ IIID Max Space Gray Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Grey At layer #24 (2mm) swap to Space Gray At layer #31 (2.56mm) swap to White for the rest.

Dragon Art Hueforge NO AMS Needed

DRAGONS 🐲👹👹🐉🐲

lancelotcv

Harry Potter - Magic wands&nbsp;&nbsp;Source : https://www.printables.com/cs/model/166124-harry-potter

Harry Potter - Magic wands

HARRY POTTER 🧹🧙🏽‍♀️🧙🏼‍♂️🎥🎬🧟‍♂️🗝️🚙

TKB-3D

<h2>Mason Jar Candy Machine</h2>Easy print, works great with M&amp;M&#39;s and simlar sized candy.Only need Super Glue for this version .&nbsp;Not my design but I loved it so had to share!

Mason Jar Candy Machine

HOME PRACTICAL 🏘️🗜️🗄️🖇️🗃️🗑️📝

Pandart3D

avete mai pensato ad un fischietto che fa i peti?vi piacerebbe averlo?le vostre attese sono finite!ottimo per le feste, per carnevale, per fare scherzi e…per divertirsi!cosa vi serve per ottenerlo?niente di particolare, solo stampare il file e aggiungere un palloncino e delle forbici.vi spiego subito:l'occorrente<img src="https://makerworld.bblmw.com/makerworld/draft/448008/2024-01-14_a0fe7428b0562.jpg">prendere un palloncino e tagliarlo alla massima lunghezza della parte lunga…dove? qui<figure class="image image_resized" style="width:23.3%;"><img src="https://makerworld.bblmw.com/makerworld/draft/448008/2024-01-14_253ae71083bea.jpg"></figure><figure class="image image_resized" style="width:22.46%;"><img src="https://makerworld.bblmw.com/makerworld/draft/448008/2024-01-14_c603144c35269.jpg"></figure>poi applica la parte tagliata qui<figure class="image image_resized" style="width:16.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/448008/2024-01-14_bcb52b8eafc54.jpg"></figure><figure class="image image_resized" style="width:16.15%;"><img src="https://makerworld.bblmw.com/makerworld/draft/448008/2024-01-24_9a5476147e3ff.jpg"></figure>&nbsp;EDIT:IMPORTANTE!!!il palloncino va inserito con la parte tagliata verso il fischietto, in questo modo suona molto meglio!!!&nbsp;alla fine metti uno dei 3 finali, fanno 3 suoni diversi, scegli quello che ti fa più ridere, incastralo e soffia forte!!!!&nbsp;&nbsp;Have you ever thought of a whistle that makes farts?would you like to have it?your waits are over!excellent for parties, carnivals, for playing pranks and... for having fun!What do you need to get it?nothing fancy, just print the file and add a balloon and scissors.I'll explain right away:the necessary&nbsp;take a balloon and cut it to the maximum length of the long part... where? here&nbsp;EDIT:IMPORTANT!!!the balloon must be inserted with the cut part towards the whistle, this way it sounds much better!!!&nbsp;&nbsp;at the end put one of the 3 endings, they make 3 different sounds, choose the one that makes you laugh the most, fit it in and blow hard!!!!

Fart whistle

KIDS TOYS 🧸🧮🪀🧒🏻👧🏽🪁🛴🛹 🔫

TwinShepherdPrinting

I couldn't find a tool organizer for my print station that met my exact needs so I said “to hell with it” and made my own. includes inserts for IPA bottles, hand tools, scrapers, glue sticks and a “Catch All” tray at the bottom for random odds and ends.&nbsp;Including the Step file for those interested in changing the model to fit their own needs, I would love to see what some of Y'all come up with!&nbsp;Added a variant with horizontal caliper storage to the Raw files section for those interested.&nbsp;For those with a small form factor printer like the A1 mini o.Ojack did a great job making a smaller variant that fits on the mini build plate!<a target="_blank" href="https://makerworld.com/en/models/147182#profileId-160578" rel="nofollow noopener">https://makerworld.com/en/models/147182#profileId-160578</a>&nbsp;Some users have reported issues finding the caliper model files so I have created a separate post for that model. the files can still be found on under this models Raw Files drop down menu however for convenience and handy app ease of use the caliper model can be found here: <a target="_blank" href="https://makerworld.com/en/models/154289#profileId-168688" rel="nofollow noopener">https://makerworld.com/en/models/154289#profileId-168688</a>

Catch All Desk Organizer

TOOLS 📐⚒️⛏️✂️🔧🧰🔩🗜️

thedecember87

muttiholder for our desk, the holder have multiple functions:Pen holder, phone holder, card or wallet holder, double key holder, all enclosed in one solution

Office multi holder

OFFICE 📂📙👔🏢🗄️🖇️🖋️🖊️📝

tufactoria3d

This is my design of a Sphynx Cat using the software HUEFORGE. Perfect for a gift or decor your room. This file is suitable for all printers (not only bambu). in case you don´t own a Bambu, just take care of the layers height in order to make de filament change.Please print at 0.08 layer height. The file also includes the .amf with all the color changes but also here you have the note:&nbsp;Swap Instructions (Just in case you want to make the filament changes manual): Start with Black (xyzfilaments) At layer #5 (0.52mm) swap to Dark Gray (xyzfilaments) At layer #9 (0.84mm) swap to Light Gray (xyzfilaments) At layer #14 (1.48mm) swap to White (xyzfilaments) for the rest.

Sphynx Cat HUEFORGE

ANIMALS 🐆🐀🐃🐅🐒🐓🐕🐦🐧🦃🐪🦒

Speedy06

Update 1/16/24:I have updated both the Main and Lid to have filleted (rounded) edges. &nbsp;Heart shaped box with removable lid and inset heart on the lid for multi color.&nbsp;Feel free to remix it or let me if any modifications are wanted. I have created it in SolidWorks and can provide the original files if anyone wants.&nbsp;Also here is link to Heart Bowl that I created in case you want something without a lid. https://makerworld.com/en/models/137611#profileId-149762&nbsp;About the print:Size: 178mm x 178mm x 47mmPrinter used: X1CFilament: NuMaker PLA+.20 Standard Profile&nbsp;Please leave a review (good or bad). Let me know what you liked or something you would like changed.

Heart Storage Box

HOLIDAYS 🎅🏻🍾❤️🐰🧚🏻‍♂️🍁🎃🕎✡️

3Dprint-K81

DO YOU LIKE READING? THEN YOU CAN'T DO WITHOUT THIS GADGETS…&nbsp;PRINT IT IN THE COLOR YOU PREFER AND INSTALL THE LED TORCH (SEE THE LINK BELOW),SO YOU CAN ENJOY A GOOD READING EVEN IN THE DARK IN BED OR IN THE OFFICE TO LIGHT UP THE TEXT WHEN YOU'RE IN ENVIRONMENTS WITH LITTLE LIGHT.&nbsp;IT IS COMFORTABLE TO READ USING ONLY ONE HAND!!!&nbsp;LINK FOR LED LIGHT:Protable Tiny Mini Gadget Keychain Bright Flashlight Long Lasting Waterproof Multifunctional Self Defense Light Torch Outdoor<a target="_blank" href="https://it.aliexpress.com/item/1005001769477336.html?srcSns=sns_WhatsApp&spreadType=socialShare&bizType=ProductDetail&social_params=60472807093&aff_fcid=d4eac6f185934694b15c43f7666c8268-1705844858177-00674-_EuQsOQ9&tt=MG&aff_fsk=_EuQsOQ9&aff_platform=default&sk=_EuQsOQ9&aff_trace_key=d4eac6f185934694b15c43f7666c8268-1705844858177-00674-_EuQsOQ9&shareId=60472807093&businessType=ProductDetail&platform=AE&terminal_id=5d9562f6a3544c03805c1cce77383d86&afSmartRedirect=y" rel="nofollow noopener">Protable Tiny Mini gadget portachiavi torcia luminosa a lunga durata impermeabile multifunzionale autodifesa torcia leggera all'aperto - AliExpress</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/651069/2024-01-21_e49e3b397442.png"></figure>ENJOY PRINTING…AND LET ME KNOW YOUR FEEDBACK

Led book page holder

HOBBIES 🏇🏾🤺🏂🏾🚵🏾‍♀️🧗🏾‍♀️🧙🏾‍♀️📔📖

ME STUDIO

🌈 🦖 Magical Dinosaur Calendar : <a target="_blank" href="https://makerworld.com/en/models/114991#profileId-123662" rel="nofollow noopener">LINK</a>&nbsp;&nbsp;&nbsp;🌈🦄 Introducing the Magical Unicorn Calendar 🌈🦄&nbsp;This whimsical and practical calendar is designed to bring a touch of magic to your daily planning. Let's explore its key features:&nbsp;💡Easy to Print: The Unicorn Calendar is designed with convenience in mind. You can easily print it out without the need for any complicated assembly. Simply follow the provided printing instructions, and you'll have your enchanting calendar ready to use.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/514463/2023-12-28_cb464ecb36727.gif"></figure>GIF image for magnetic cover&nbsp;&nbsp;🦄 Magnetic Closure: To add a delightful touch, the Unicorn Calendar features holes along the edges that allow you to add magnets. By attaching magnets (OD10mm x 1.6mm) 12pcs, you can easily close the calendar cover, keeping it securely in place and ensuring that your unicorn-themed calendar stays intact.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/514463/2023-12-28_7433de862e0e4.gif"></figure>GIF image for magnet installation&nbsp;&nbsp;🌈 Changeable Date, Month, Days of the Week, and Weather: The Unicorn Calendar incorporates a creative and interactive element. By using specially designed dice, you can change the date, month, days of the week, and even the weather displayed on the calendar. This feature allows for a personalized and engaging experience as you update your calendar each day.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/514463/2023-12-28_ebaa1372536d1.gif">&nbsp;&nbsp;🌟Easy Installation of Stands: The Unicorn Calendar comes with user-friendly installation stands. Setting up the stands is a breeze, ensuring that your calendar stands upright on your desk, countertop, or any other preferred surface. The stands provide stability and make it easy to view and access your calendar throughout the year.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/514463/2023-12-28_07db6b4fc495a.gif"></figure>GIF image for stands installation&nbsp;&nbsp;The Unicorn Calendar combines functionality with a touch of enchantment, making it a perfect addition to your home, office, or any space where you want to infuse a little magic into your daily routine. Stay organized, enjoy the whimsical design, and let the Unicorn Calendar bring a smile to your face every day!&nbsp;&nbsp;***&nbsp;Copyright:All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.If you want to sell my prints commercially and legally, you can join my Patreon:<a target="_blank" href="https://www.patreon.com/MESTUDIO" rel="nofollow noopener">https://www.patreon.com/MESTUDIO</a>&nbsp;The digital files (STL and other formats) may never be resold, shared, remixed or given away. Happy printing!&nbsp;***&nbsp;&nbsp;<h3>LOVE THIS DESIGN?</h3>You might also like my others:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/514463/2023-12-12_c792206b38321.jpg"></figure>&nbsp;🎉 2024 Happy New Year Party Glasses (Adult Version) :<a target="_blank" href="https://makerworld.com/en/models/90795#profileId-97152" rel="nofollow noopener">https://makerworld.com/en/models/90795#profileId-97152</a>&nbsp;🎉 2024 Happy New Year Party Glasses (Kids' Version) :<a target="_blank" href="https://makerworld.com/en/models/99723#profileId-106322" rel="nofollow noopener">https://makerworld.com/en/models/99723#profileId-106322</a>&nbsp;&nbsp;

Magical Unicorn Calendar

↪️📩🔜TO DO ASAP 🚨🚨

mendieselnco

Poop Bucket for the Bambu Lab A1.&nbsp;If your printer likes to poop at high Z'… The A1 Poop Diverter Purge Wiper Attachment<a target="_blank" href="https://makerworld.com/en/models/138088#profileId-150345" rel="nofollow noopener">https://makerworld.com/en/models/138088#profileId-150345</a>&nbsp;Changelog:1/13/2024: Added print profile for poop bucket w/deflector&nbsp;

A1 Poop Bucket

A1 parts 🖨️🖥️🗜️📐🧰 🔩⚒️

Rush hour rules are easy. Clear the way for the red car to be able to leave the parking lot. Cars can move only forward/backward, no lifting the cars!&nbsp;Printing:<ul><li>Depending on the challenge difficulty, you'll need to print up to 4 trucks and 12 small cars. One of the small cars (preferably convertible one) must be printed in red.</li><li>Parking lot can be printed using different colors to highlight lanes and arrows:<ul><li>Option A - use filament color change in a layer. From 0 to 3.8 mm white color, from 4 all the way to the top grey color.</li><li>Option B - use provided 3mf file and AMS.</li></ul></li><li>Asphalt is as separated model for better visual.</li><li>0.2 mm layer height.</li><li>No supports needed.</li></ul>Other hardware and assembly:<ul><li>Besides filament, you'll also need 72 pcs of cylindrical neodymium magnets 5x1 mm (diameter x height). It is not mandatory, but it's much more comfortable to play with magnetic cars. Use superglue to attach magnets to place.</li><li>New travel friendly design - lid now serves as a stand too and is held in place (in both closed and opened state) using 8 pcs of 8x3 neodymium magnets.</li><li>Pieces of filament to connect hinges with lid and parking lot.</li></ul>You can generate challenges using online generator, for example <a target="_blank" href="https://www.thinkfun.com/internal/rush-hour-challenge-generator/" rel="nofollow noopener">here</a>. I attached several example challenges.