VelocirAitor

Release The Fleet

🐢🌊 Dive into the depths of marine beauty with our Sea Turtle Nautical 3D Layer Art STL file! 🎨✨ Add a touch of coastal charm to your space with this captivating piece, featuring intricate layers and the grace of sea turtles. 🏠 Elevate your decor with this unique blend of art and oceanic wonder! #SeaTurtleArt #NauticalDecor #3DLayerArt

Sea turtle Nautical 3D Layer Art

BOOKMARK

musicalbigfoot

Bring the Jurassic to your jewelry box with these Stegosaurus dinosaur earrings, perfect for those who appreciate a hint of whimsy in their daily attire. These earrings showcase an eye-catching gradient that blends up to four colors, enhancing the distinct silhouette of the Stegosaurus with its iconic plated back. The design is inspired by modern vector-style art, providing a simplified yet striking depiction of this well-loved dinosaur. With symmetry in design, these earrings present the same delightful image on each side, crafted for style and comfort during everyday wear.&nbsp;Optimal Layer Changes:This model should be 10 layers at 0.08mm layer height. Color swaps should happen on layers 4, 6, and 8 for optimal results.&nbsp;Assembly: Apply super glue to one side and attach the opposite side. Optionally apply a tiny dab of glue on the extremities will keep the tiny bits together. Feel free to go wild with the earring hardware - leave a comment showing your works of art!&nbsp;Note: The original profile that was uploaded includes a ‘hole punch’ negative object on each earring body - these holes were meticulously placed in order to maintain balance, if you notice your earrings are hanging off-center then check your hole punch object placement!

Stegosaurus - Dino Earrings / Series 1

Bisuteria

cyanidesugar

Here&#39;s another beautiful (if I may say so myself) HueForge Hybrid print for you!&nbsp;&nbsp;I used Burnt Titanium for the &#39;space blue&#39; and it turned out magnificently, but you can use whatever you feel like, honestly! Same goes for the material for the TIE Fighter. I just wanted to try out the Metal PLA that Bambu sent me :) An AMS is not needed for this, however will make it easier. If you do not have an AMS, just manually swap out the filament spools at the right layer (adding a pause in the slicer where you would change colours)&nbsp;&nbsp;This print takes 3 hours on the Bambu Lab P1P and is completely printed in place, without supports. If you are using a Bambu printer or Bambu studio, the 3MF will have all the necessary settings you need. If not, please download the STL and follow the instructions below!&nbsp;&nbsp;Print Instructions: HueForge section of the print (0.00mm - 2.00mm) - Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm&nbsp;&nbsp;TIE Fighter part of the print (2.04mm - 64.44mm) - Print at 0.16mm layer height, with 2 walls, 3 tops and 3 bottom surfaces - I used 5% gyroid infill.&nbsp;&nbsp;Filaments Used: - PLA Kingroon Black Transmission Distance: 0.4 - PLA Flashforge Burnt Titanium Transmission Distance: 5 - PLA CC3D Lemon Yellow Transmission Distance: 8 - PLA BambuLab Basic Jade White Transmission Distance: 5 - PLA Bambulab Metal Iron Gray Transmission Distance: 0.6 (or the TIE Fighter!)&nbsp;&nbsp;Swap Instructions: - Start with Black - At layer #23 (1.04mm) swap to Burnt Titanium (for the space background, but you can use anything!) - At layer #27 (1.2mm) swap to Lemon Yellow - At layer #39 (1.68mm) swap to Jade White - At 2.00mm swap to Bambulab Metal (for the TIE Fighter!)&nbsp;&nbsp;The TIE model itself can be found found <a target="_blank" href="https://www.thingiverse.com/thing:1735498" rel="nofollow noopener">here</a> :)&nbsp;&nbsp;_______________________________________________If you&#39;d like to support me, I now have a <a target="_blank" href="https://patreon.com/cyanidesugar3dp" rel="nofollow noopener">Patreon</a>!Joining will give you behind the scenes information on WIPs, access to a private discord, early access AND exclusive models!If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!_______________________________________________

TIE Fighter in Flight - HueForge Hybrid

STARWARS

Nikooki

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Sunlu Meta Black Transmission Distance: 1 PLA BambuLab Basic Brown Transmission Distance: 2 PLA+ Sunlu Gold Transmission Distance: 5 PLA Sunlu Meta White Transmission Distance: 8 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Brown At layer #12 (1.04mm) swap to Gold At layer #20 (1.68mm) swap to White for the rest.

Marauder's Map (Harry Potter) bookmark - Hueforge

HARRYPOTTER

goldiesvinyl

Yet another magnet i made for a coworker and figured id share&nbsp;needs 3x 6x2mm magnets post print

Harry Potter Cat Magnet

Imanes

rky.91

Here's a wall decor sign inspired by the Bear Market Trend. I've also created the <a target="_blank" href="https://makerworld.com/en/models/217082#profileId-236105" rel="nofollow noopener">Bull Market Trend</a> sign.&nbsp;The letters are fully printed separately, so it's also possible to have the logo part only.

Bear Decorative Sign

CasaPrint3D

Introducing our new antistress fidget pen, a printable pen with individual rotating gears that is compatible with any BIC crystal.<blockquote>Twist the tiny gears to feel the satisfying motion and texture of this pen. Boost creativity, focus, and relief your tension.</blockquote>We designed this pen with the objective to relief stress in those long studying days or tense moments at the office. Simply grab it with your palm or fingers and twist the gears in any direction, all of them are independent and adapt perfectly to your hand.&nbsp;How does it work?We used the fine 0.2mm nozzle to create a print-in-place mechanism that takes advantage of the thin walls generated to break the gears free with ease. If you would like to print a 0.4mm Nozzle version, you can find it <a target="_blank" href="https://cults3d.com/en/3d-model/home/anti-stress-fidget-pen-with-gears-0-4mm-nozzle-version" rel="nofollow noopener">here</a>&nbsp;ImportantThis item was specifically designed for the 0.2mm Nozzle and to be printed at exactly 0.1mm layer height, any other combination will probably not work well. Also, it is important to have very well-tuned filament and print settings, and to dry the filament before using. Over-extrusion and stringing will bond the gears excessively to the body of the pen.&nbsp;For printing I had good results with basic PLA and silk PLA. Overall they are extremelly detailed and strong. However, with Matte PLA I had layer adhesion issues and the pens came out a bit fragile. Also, I strongly recommend cleaning the plate very well with detergent and using a brim, as it is quite tricky to hold the pen vertically with such a small area. Reducing speeds can help with adhesion issues.Also, print without supports, and ignore the floating regions warning from the slicer.&nbsp;InstructionsDepending on the filament and settings, you will likely need a bit of time to break all the gears free. I recommend using a scalpel tool / X-acto knife or similar and carefully cut through all the gears individually without putting too much pressure. Check video below:&nbsp;<figure class="media"><oembed url="https://www.youtube.com/watch?v=oh2Gh-T2-Kw"></oembed></figure>&nbsp;&nbsp;To put the clip and cap together, you will need a bit of CA glue / superglue.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000458729/design/2024-05-09_bfed3e7806f15.jpg">&nbsp;Remember that this file is for personal use only - Commercial licenses are available in our <a target="_blank" href="https://www.patreon.com/CasaPrint3D" rel="nofollow noopener">Patreon</a>&nbsp;If you&#39;d like to support our work, we&#39;d be super grateful for a boost 🚀 or a <a target="_blank" href="https://ko-fi.com/casaprint3d" rel="nofollow noopener">[Ko-Fi]</a>. Your contribution, no matter how small, helps us to continue bringing more 3D models to life - and most importantly buying filament and coffee, what every 3D printing designer needs ;) Thank you!&nbsp;Happy printing!&nbsp;

BOOKMARK

Bisuteria

STARWARS

HARRYPOTTER

Imanes

Art

Otros