Vaughn James

alfoldiladislav81

<p>I couldn't find a protective case for my Avata anywhere, so I modeled one. You can attach it to a backpack in several ways or just put it in a bag or backpack without damaging the propellers.The goggles and the remote control are massive enough to be put in a backpack without protection. I modeled the case so that it takes up the least amount of space.</p>

DJI Avata protective case

drone 

Technikfussel

<p>This amazing design comes from <strong>Widgets </strong>@JeremyStense_1058276 on printables. it looks amazing and i want to share it with you for a fast and easy printing experience.</p>

sound diffusion panels  -  wall panels

room upgrades

Sgandalf

<p>The Model is 200x200mm</p><p>&nbsp;</p><p><i>I also added the raw stl files in the 100x100 mm / 150x150 mm format, as a print profile it is possible to use the standard 200x200 mm one, however I have not tested these formats, so I cannot guarantee the result</i></p><p>&nbsp;</p><p>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</p><p>&nbsp;</p><p>Filaments Used:<br>PLA BambuLab Basic Black <br>PLA BambuLab Basic Orange <br>PLA Geetech Basic Yellow <br>PLA BambuLab Basic Jade White</p><p>&nbsp;</p><p>Swap Instructions:<br>Start with Black<br>At layer #18 (1.52mm) swap to Orange<br>At layer #24 (2mm) swap to Yellow<br>At layer #29 (2.4mm) swap to Jade White for the rest<br> </p>

HueForge - Balrog 200X200 mm

HueForge

Brian Dean

<h2><strong>Embedded Magnet Dispenser Tool for Multiple Diameters and Thicknesses</strong></h2><h3>PROFILE NOTE</h3><p><strong>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</strong></p><h3>Latest Update (2024-04-21): Quick summary</h3><ol><li>additional magnet sizes</li><li>magnet size text embossed on the barrel and also included on the slider</li></ol><p>See below for the more detailed update notes.</p><h2><strong>Magnet Dispenser for 3D Prints: Simplify Magnet Insertion with Precision</strong></h2><p><span style="color:rgb(55,65,81);font-size:16px;">The Magnet Dispenser Tool is expertly designed to streamline the insertion of magnets into 3D prints. This tool not only speeds the process of inserting magnets into 3D Prints, it also ensures correct orientation and secure fitting, making it ideal for projects that require precise magnet placement.</span></p><h3><strong>Key Features</strong></h3><h4><strong>Dual Dispensers for Perfect Alignment</strong></h4><ul><li>Includes two dispensers for each magnet size – one for north-up and one for south-up orientations</li><li>Use different colors (e.g., red for north-up and blue for south-up) to help easily identify the dispenser&#39;s orientation</li><li>Eliminates the hassle of misaligned magnets</li></ul><h4><strong>Design and Utility</strong></h4><ul><li>Developed after extensive refinement</li><li>Allows for friction-fit insertion and is also suitable for magnets that are glued</li><li>Tapered tip facilitates use in tight spaces</li></ul><h4><strong>Ease of Use</strong></h4><ul><li>The dispensers are designed to accommodate the specified magnet sizes for their internal holding magnets, but can dispense magnets of any thicknesses for the specified diameter. For example, for the 6x3mm dispenser, you will need 6x3mm magnets to assemble the dispenser, but once assembled, that dispenser can dispense any 6mm diameter magnet such as 6x1, 6x2, 6x3, 6x5, etc.</li></ul><h4><strong>Convenience and Storage</strong></h4><ul><li>Features a snap-on cap with an embedded magnet and a top slider magnet</li><li>Ensures secure storage and prevents accidental magnet spillage</li></ul><h4><strong>Customization and Printability</strong></h4><ul><li>No supports needed for printing</li><li>STL and STEP files included for personal customization</li><li>Compatible with PETG, PLA, ASA, ABS, etc</li><li>Adjust x/y hole compensation if needed for perfect fit</li></ul><h4><strong>Visual Guide</strong></h4><ul><li>Fusion 360 images provided for easy assembly and understanding of the internal mechanism</li></ul><h4><strong>Use the Magnet Dispenser for a hassle-free, precise, and efficient magnet insertion experience in your 3D printing projects.</strong></h4><h3>Supported Magnet Sizes</h3><h4>Dispensers are now provided for the following magnet sizes as of <i>Version 5</i></h4><ol><li>2x1mm</li><li>2x2mm</li><li>2x3mm</li><li>3x1mm</li><li>3x2mm</li><li>3x3mm</li><li>4x1mm</li><li>4x2mm</li><li>4x3mm</li><li>5x1mm</li><li>5x2mm</li><li>5x3mm</li><li>6x2mm</li><li>6x3mm</li><li>7x2mm</li><li>7x3mm</li><li>8x2mm</li><li>8x3mm</li><li>8x4mm</li><li>9x2mm</li><li>9x3mm</li><li>10x1mm</li><li>10x2mm</li><li>10x3mm</li><li>12x2mm</li><li>12x3mm</li><li>15x2mm</li><li>15x3mm</li><li>20x2mm</li><li>20x3mm</li></ol><p>NOTE 1: The 1mm magnet thickesses are just too thin to work reliably with the friction-fit of the slider and caps. Therefore, I have made the pockets of the “1mm” thickness magnet dispensers to be that of the 3mm variety so that they work. So to assemble a 1mm magnet thickness dispenser, you will need to purchase a few 3mm thick magnets to assemble the dispenser. A 2mm thickness will likely work ok, too. Note that the text on the dispenser will still say “D x 1 mm” for the barrel, “Dx1” on the cap, and “D/1” on the slider, so you know what magnets you have loaded into it.</p><p>&nbsp;</p><p>NOTE 2: the above are the sizes needed to assemble the dispenser. The dispenser can still dispense any thickness of magnet as long as the diameter is the same. So if don&#39;t see your specific magnet thickness listed above, you can still print the correct diameter, assemble the dispenser with the correct magnet thickness, and dispense other thicknesses.</p><p>&nbsp;</p><p>STEP and STL raw files are included if you do not wish to use the provided profile.</p><h3>Quality Assurance Testing</h3><ul><li><span style="color:rgb(55,65,81);font-size:16px;">All dispenser sizes have been printed by me and extensively tested</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">I have purchased all magnet sizes at significant expense to myself to ensure fit</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">Magnet diameters are tricky for press-fit tolerance and controlled by no less that 5 Fusion 360 parameters that must be balanced to achieve good fit</span><ul><li><span style="color:rgb(55,65,81);font-size:16px;">Multiple iterations of each dispenser were printed and refined</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">Many kilograms of filament and hundreds of hours of print-time were consumed during this process</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">All to ensure the best quality printing and fit-up for each dispenser size</span></li></ul></li></ul><h3>About the Profiles</h3><ol><li>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</li><li>NOTE: The “Designer” profile is a single profile that contains plates for all magnet sizes so far. Please ignore the “total time” reported by MakerWorld for the profile. You only need to print the plate(s) that you need. Each plate takes about 2.5-2.9 hours on my X1C using the included “PETG” profile which is slowed down for good PETG layer adhesion and quality.</li><li>While the other profiles may be ok, their file / update version may be out of date. So if you want the latest sizes and model improvements, please choose the top “Designer” profile.</li></ol><h3>Accessories</h3><p>Be sure and check out some nice accessories that other folks have created to work with these dispensers.</p><ul><li><strong>Tip Caps</strong> - these are nice caps for the dispensor tip. Not only do they help keep the magnets contained within, but they also protect the tip. Additionally, they are labeled with the magnet size, which is nice. Thank you @onegotowned ! <a target="_blank" href="https://makerworld.com/en/models/149038#profileId-162633" rel="nofollow noopener">https://makerworld.com/en/models/149038#profileId-162633</a></li><li><strong>Vertical Workbench Stand</strong> - This is a very nice stand for select diamagers made by @nickramsey57. A number of folks have asked about stands / organizers for the dispensers, so this model will likely be useful to a number of folks. Thank you @nickramsey57 ! <a target="_blank" href="https://makerworld.com/en/models/206388#profileId-226561" rel="nofollow noopener">https://makerworld.com/en/models/206388#profileId-226561</a></li><li><strong>Vertical Workbench Stand (parametric)</strong> - Here is another very nice stand made by @RevHazlett. You can specify the dispenser sizes that you want it to hold and then generate, making it customizable to your needs and the common magnet sizes that you use. Thank you @RevHazlett! <a target="_blank" href="https://makerworld.com/en/models/435087#profileId-340031" rel="nofollow noopener">https://makerworld.com/en/models/435087#profileId-340031</a></li></ul><h2>Update History</h2><h3>Version 5: 2024-04-21</h3><ol><li>Emboss the magnet size text on the Barrel (see photos), allowing one to view the size from the side, and also allowing one to print all of the barrels on a single plate and not get the barrels mixed up as to what size they are for.</li><li>Include the magnet size text on the Slider (see photos), allowing one to print all of the sliders and caps together on one plate and not get the sliders mixed up as to what magnet size they are for. Also provides additional text identification of the magnet size within.</li><li>Include 11 new magnet sizes:<ol><li>3x1mm</li><li>4x1mm</li><li>5x1mm</li><li>7x2mm, 7x3mm</li><li>8x4mm</li><li>10x1mm</li><li>15x2mm, 15x3mm</li><li>20x2mm, 20x3mm</li></ol></li><li>Re-organize the plates so that they are a little easier to manage. All dispenser sizes for each “diameter” are spread across three plates now - the Barrels, the Red Caps and Sliders, and the Blue Caps and Sliders. This allows one to “print-by-layer” instead of “print-by-object”, and the text also comes out better. Additionally, it is now easier to construct a plate with all of the size variations on 3 individual plates and print them all at once.</li></ol><h3>Version 4: 2023-12-26</h3><ol><li>Fixed an issue where the smaller diameter magnets such as the 2mm, 3mm, and possibly the 4mm magnet diameters could inadvertently slip through the vertical barrel slider stem slot. Prior to this update, the slider stem was a fixed 3mm + tolerance width. With Version 4, the slider slot is now dynamic based on the magnet diameter. So now, the smaller diameter magnets are captive within the barrel and cannot slip out inadvertently.</li><li>Tighten up the tolerances between the “slider” and the “barrel” for a better fit and smoother operation.</li><li>Use the Profile: “Version 4: All Sizes …” for the latest from this update.</li></ol><h3>Version 3: 2023-12-22</h3><ol><li>Added additional magnet sizes<ol><li>2x1mm, 2x2mm, 2x3mm</li><li>9x2mm, 9x3mm</li></ol></li><li>Text is now added within the Fusion 360 Model File, eliminating the need to add the text using Bambu Studio<ol><li>Ensures consistent text placement and easier colorizing of the text</li></ol></li><li>All plates are included for all magnet sizes, two dispensers per plate, print sequence: print-by-object</li></ol><h3>Version 2.1: 2023-11-28</h3><ol><li>Added additional magnet sizes<ol><li>3x2mm</li><li>4x2mm, 4x3mm</li><li>5x2mm, 5x3mm</li><li>6x2mm</li><li>8x2mm, 8x3mm</li><li>10x2mm, 10x3mm</li><li>12x2mm</li></ol></li><li>The magnet size text is included on the cap for easy identification - see photo</li></ol><h3><strong>Version 2: 2023-11-20</strong></h3><p>Updated to “Version 2”. Significant updates an enhancements have been made, some seen, some unseen.</p><ol><li>Added additional magnet sizes<ol><li>3x3mm</li><li>12x3mm</li></ol></li><li>Each magnet size is on its own plate, two dispensers per plate, print sequence: print-by-object</li><li>Redesigned “thumb slider” for greater comfort and stronger press force</li><li>Slider stem has been reinforced</li><li>Many enhancements for smoother operation with internal chamfers and fillets, enhanced tolerances, and strengthening of key internal components</li></ol><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p>

Embedded Magnet Dispenser Tool for 3D Prints

Tools

niltsh

<p>This is the updated version of <a target="_blank" href="https://makerworld.com/zh/models/39368#profileId-38480" rel="nofollow noopener">https://makerworld.com/zh/models/39368#profileId-38480</a></p><p>&nbsp;</p><p>I am really glad that there are many guys like this collapsible katana, and I do appreciate your suggestions and opinions.</p><p>&nbsp;</p><p>So I found some time and made a new one, addressing the following issues in the old one.</p><ol><li>The strength of the handle-guard connector. This time I combined the handle and connector together to enforce the strength.</li><li>The decoration on the handle is better to be multi colorred. So I made a new structure with the outer shell and inner shell to form the handle. With different colors of the shell, the handle now looks more real.</li><li>The blade guide is thicken so should not be easy to break now.</li><li>the disassemble structure are located at the tail now. And now only two pieces of filament could lock it.</li></ol><p>&nbsp;</p><p>Some important suggestion and notes</p><ol><li>When printing the slide lock, I suggest to use the Cool/Smooth Plate. As when using Textured Plate, the thickness of slider sole is a little bit thicker than it should be, it might cause hard to slide.</li><li>Still need to use a little bit instant glue for the handle and guard, do not apply too much as it might glue the slider too. Don&#39;s ask why I know it :)</li><li>The holes to lock the tail and handle are printed without any support, so it might not be perfect. This might cause the filament hard to insert. I suggest to use a Hex Key 1.5 to clear the holes first.</li><li>The folding diameter of the rubber ring is 60 mm.</li><li>This time, the handle is printed with Support, and I have tuned it many times to perfect the rhombic holes. BUT it is still not perfect.</li></ol><p>If some one has better ideas, please let me know, or update your configuration here.</p>

Collapsible Katana - Revoluted V2 / 活拆式伸缩刀 V2

Models

bonfiggy

<p><span style="background-color:rgb(255,255,255);color:rgb(42,42,42);font-size:16px;">Perfect fitting antivibration feet printed in TPU with 15-20% infill for best results. No supports needed! Seems to help a good bit as well with the shaking/noise and a lot less printer wobble as well :)</span></p>

Bambu Lab P1P/P1S/X1/X1C Anti Vibration Feet

P1S upgrades

Wallydoggy

<p>Numbers for house address. Print with ASA filament to withstand the elements. Each number has a chamfer on the back side to give the numbers a slightly floating modern look. Nail or adhere the numbers to the wall of a house, garage, or mailbox and paint them if needed.</p><p>Each number measures 110 mm from top to bottom and they are 5 mm in thickness. This size is common among most address numbers found at home improvement stores.<br> </p><p><strong>Notes:</strong></p><p>&nbsp;</p><p>Use ironing on top layer to make the surface finish smoother.</p>

House Address Numbers

Random

KYZ Design

<p><strong>Update 17/09/2023</strong></p><ul><li>Added “HSW Ez-V1 Round Object Holder - 65mm Left”</li></ul><p><strong>Update 29/04/2023</strong></p><ul><li>Added “Ez-V1” and “Ez-V2" hooks (14 files) which supersedes all other versions. These have been completely remodeled for improved strength, easier bed adhesion for ABS/ASA, more secure fit with easier clipping, less side-to-side movement when installed and a cleaner look.</li><li>Added 2 base clips for remixing.</li></ul><p><strong>Update 24/04/2023</strong></p><ul><li>HSW Simple Hook 50mm Type 1 v1.1 added - stronger vertical section</li><li>3 “Ez” hooks added for easier install - these work better for PLA wall pieces, and the firm ones work better for PETG wall pieces.</li></ul><p>---</p><p>I wasn't happy with the current hook designs as the layer direction was always sub-optimal, seemed wasteful and they do not hook on securely. Here are some easy print strong designs. No screws or supports needed and no need to print separate pieces to be able to mount them.</p><p>You will need good first layer adhesion - clean your build plate and get your first layer squish right or use a brim if you are using a warp-y material.</p><p><strong>Print setting recommendations:</strong></p><p>Material: PLA, PETG, ABS, ASA (PETG hooks will be a little less secure due to the reduced stiffness)Temperature: print on the hotter end of your material's temp range, the overhangs are 45 deg at most so it should print fine0.4mm nozzle, 0.25mm all layer heights2 walls, 30% grid infillIf you have issues with fitment, you can try scaling it in only the "vertical" direction by adding or removing 1% or 2% (vertical direction when installed, not when lying flat) to give the detents more or less bite. Alternatively, try printing outer walls first for better dimensional accuracy.</p><p><strong>Installation and removal:</strong></p><p>Install like a pegboard hook - get the top in first, then the bottom.Remove by pushing up on the hook.</p><p>Make sure you install your Honeycomb the right way around! It seems to be a very common mistake. The thicker part of the honeycomb faces YOU. These hooks will not fit properly if you have your honeycomb the wrong way around. I made a diagram to clarify:</p><figure class="image image_resized" style="width:53.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/131755/2023-09-25_nppzjja4u8d4.png"></figure><p>Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models and</p><p>check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my Gridfinity models.</p><p>&nbsp;</p><p>To support me, simply share my models :)</p><p>&nbsp;</p>