Vann Life

<p>This model uses the awesome hotend holder designed by <a target="_blank" href="https://www.printables.com/@MyStoopidStuff" rel="nofollow noopener">https://www.printables.com/@MyStoopidStuff</a> and turns it into a Gridfinity container for easy retrieval of hot ends displaying their size.</p><p>&nbsp;</p><p><strong>Please note this is designed for non assembled hotends. For fully assembled hot ends see my other </strong><a target="_blank" href="https://makerworld.com/en/models/124042#profileId-138551" rel="nofollow noopener"><strong>model</strong></a><strong>.</strong></p><p>&nbsp;</p><p><span style="background-color:rgb(255,255,255);color:rgb(42,42,42);font-size:16px;">This design has both a single hotend holder and a double hot end holder. Print which ever suits your needs best. The design includes cutouts for 6x2mm magnets and lips for stacking. Also includes holes for spare screw to sit in. The screws will sit slightly proud to allow for a finger to get them out.</span></p><p><br>You may also like my other Bambu Gridfinity models:</p><ul><li><a target="_blank" href="https://makerworld.com/en/models/135389" rel="nofollow noopener">Bambu Glue Stick Holder</a></li><li><a target="_blank" href="https://makerworld.com/en/models/124042#profileId-138551" rel="nofollow noopener">Fully Assembled Hot End Holder</a></li></ul><p><strong>Updates:</strong></p><ul><li>2024/02/28 - Updated holders so they incorporate spare screws.</li></ul>

Gridfinity Bambu Hotted Holder Non Assembled

X1C tools and organization

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/375060/2024-01-09_ayqn3eb85x9j.png"></figure><h4><strong>Dimensions (LxWxH)</strong></h4><p>82,9 x 105,5 x 39 mm (100% scale)</p><h4><strong>Basic information</strong></h4><p>The ring octopus has four tentacles dedicated to holding your rings, small jewelry, earrings, or basically anything else you desire. It's awesome for protecting your pieces from getting lost while you're not wearing them, or it can be used for a creative and playful display of your jewelry.</p><h4>Files information</h4><p>I've included one file in the .stl format.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/375060/2024-01-09_jfipnqyxwneg.png"></figure><h4><strong>Material</strong></h4><p>PLA</p><h4><strong>Layer height</strong></h4><p>≤0,2 mm</p><h4><strong>Infill</strong></h4><p>≥5%</p><h4><strong>Support</strong></h4><p>Yes, touching buildplate. Necessary for the tentacles. Proceed carefuly when removing.</p><h4><strong>Scaling</strong></h4><p>Possible, downscaling not recommended. The tentacles are quite thin, and they might not come out too great on the downscaled version.</p><h4>Orientation</h4><p>Default</p><h4>Adhesion aid</h4><p>Not necessary, contact area with the buildplate should be sufficient. If your print surface suffers from poor adhesion, consider using some adhesive spray, or other kind of adhesion booster. Using brim is a possible alternative.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/375060/2024-01-09_nxm1wao2xydx.png"></figure><p>In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not. </p><p>If you run into any issues with the model, please pay a visit to the section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem there, don't hesitate to contact me via dm.</p><p>&nbsp;</p><p>The model hasn't been updated yet.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/375060/2024-01-09_gljrmycpzwrr.png"></figure><p>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/375060/2024-01-09_0py38knu06h3.png"></figure><p>My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.</p>

Octopus ring holder

Shelley

SchulteGeileTechnik

<p>Please keep in mind that they are under a <strong>NON COMMERCIAL</strong> license, so don't sell the files or prints using this design.<br> </p><p>&nbsp;</p><p>I designed three geometric plant pots for some succulents.<br>In addition, I created an inside pot for each planter with some holes in their bottom and a little offset from the ground so that excess water can escape.</p><p>They were designed to fit small succulents with an inside width of ~60 to ~65 mm.<br>They are all around the same height (roughly 60mm from the ground).</p><p>I would love to see your prints, so if you make one be sure to post a picture under makes.<br>If you like my designs or have any questions leave a comment and maybe consider a little tip.</p><p>I also added an STL file for the base. Mine is made of concrete and not 3d printed, but I modeled it anyway to find out how the planters would look on it.<br>It is about 260 mm long so maybe you have to scale it down a little bit to make it fit on your print bed.</p><p>&nbsp;</p><p>You may also find some of my files on thingiverse and printables. I made my printables account to get away from thingiverse, but since I heard a lot of good things about MakerWorld, I decided to upload on here as well. I have access to a P1P at work and a friend of mine owns an A1, so I may be able to add some Bambuslicer-specific files in the future as well.</p>

X1C tools and organization

Shelley

Zanzi Stuff