Vakericss

tjhoven74

Here is a bunch of stakes for you to print and put in your garden.I recommend PETG since PLA will not survive UV light very long.If you make this, please post a pic! I think it is really neat to have people making my designs.If you like my design, please like and share!If you are feeling particularly generous, please buy me a coffee.Thanks!Print in PETG or something similar. PLA will work, but will degrade quickly outside. You could paint the letters manually, or do a filament color change.Enjoy!

Various Multicolor Garden Stakes

Garden/House

Sneaker

Skadis holder for Vallejo 200ml bottles, or really any 50mm bottle.

Vallejo 200ml Skadis Bottle Holder (50mm)

Air Brush files

Jaxel

I was looking for a way to stack multiple AMS on top of each other. There were several systems here on MakerWorld, but there were a few problems with them that I didn't like. Most importantly is that they weren't actually “stacking” systems. They let you put one AMS on top of another, but they could not stack beyond that. You could not stack a third, or even a fourth AMS in a single column. So I decided to make my own completely modular system that allows you to stack as many AMS you want!&nbsp;This system is sectioned off into 124mm “blocks”. There are two included wall heights, a “1-block” and a “2-block” wall. This allows you to raise your AMS to any height you want, at multiples of 124mm. If you want to simply put one AMS on top of another, you could print out walls in 3-blocks of height (2+1). This will allow enough space for you to slide the bottom AMS out in order to change filaments (like other AMS stacking systems). However, if wanted to be able to open the bottom AMS lid without having to slide it out, you would print out walls in 4-blocks (2+2) of height. Even more customizable, if you have under-AMS drawer systems, and you needed even more height between your AMS, you could print additional blocks of height to raise the top AMS even more!&nbsp;The “arms” that hold up the AMS are completely modular, and can be attached and removed at will. This has the advantage of being able to change arms without having to reprint your entire walls. So if your AMS breaks, and you buy a new one, and it turns out there is yet another new revision of the AMS, you can simply print out new arms that match the revision.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=tUU1KRgZpPQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/tUU1KRgZpPQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;I have designed this model to be as easy and simple to print, with as little support material as possible. The included print profile has parts oriented in specific ways to minimize the chance of breakage due to lateral force, so part tension does not split at layer lines. There are several pre-defined plates:<ul><li>Plate 1:<ul><li>2x 2-block wall<ul><li>These models have support enforcers on the arm sockets.</li></ul></li></ul></li><li>Plate 2:<ul><li>2x 1-block wall<ul><li>These models have support enforcers on the arm sockets.</li></ul></li></ul></li><li>Plate 3:<ul><li>2x Rear Bracers<ul><li>Optional: if you want to have some extra rigidity to your stack to prevent “wobble”.</li><li>This system uses the AMS as a bracer. You want at least two sets of bracers on your stack.</li></ul></li><li>4x Dovetail Biscuits<ul><li>Connect the bracers to the rear of the walls.</li></ul></li><li>1x AMS (rear) Bracket<ul><li>This connects the AMS to a rear bracer, if you decided to print one.</li><li>This model is oriented at a 45 degree angle for strength.</li></ul></li><li>1x AMS (rear) Bracket Lock<ul><li>Locks the rear bracket in place so the middle pin doesn't shift.</li></ul></li></ul></li><li>Plate 4:<ul><li>2x AMS (side) Bracket<ul><li>These connect the AMS to the side walls through arm sockets.</li><li>These models are oriented at a 45 degree angle for strength.</li><li>Print these out in sets of two, one for each side of the AMS.</li></ul></li></ul></li><li>Plate 5:<ul><li>2x 2-block Blank<ul><li>Purely cosmetic, so things look nicer when you have rear bracers.</li><li>If you don't use rear bracers, then you don't need these blanks.</li></ul></li><li>8x Dovetail Biscuits<ul><li>Connect the blanks to the rear of the walls.</li></ul></li></ul></li><li>Plate 6:<ul><li>2x 1-block Blank<ul><li>Purely cosmetic, so things look nicer when you have rear bracers.</li><li>If you don't use rear bracers, then you don't need these blanks.</li></ul></li><li>4x Dovetail Biscuits<ul><li>Connect the blanks to the rear of the walls.</li></ul></li></ul></li><li>Plate 7:<ul><li>1x Blank (rear) Bracket<ul><li>A connector to attach both ends of a bracer if you printed a rear bracer without an AMS.</li><li>This model is oriented at a 45 degree angle for strength.</li></ul></li><li>4x Connector - Dowel<ul><li>Optional to keep your walls together when you stack them.</li></ul></li></ul></li></ul>I have included some additional STLs that you can peruse at your leisure, but they are not on plates.&nbsp;You can find other models I have released for the X1C/AMS here:<a target="_blank" href="https://makerworld.com/en/u/2811301167/collections/109412" rel="nofollow noopener">https://makerworld.com/en/u/2811301167/collections/109412</a>&nbsp;If you appreciate my models, please consider <a target="_blank" href="https://ko-fi.com/ultrajaxel" rel="nofollow noopener">buying me a coffee</a>!

AMS Stacking System

BAMBU STUFF

Schidter

I hope you enjoy the model I've had fun tinkering with. Please see some notes below which might improve your experience:&nbsp;No outside materials required! Rubber bands and glue are totally optional.&nbsp;When removing the card from the bed, do so gently or the connections may break.&nbsp;If the plane doesn't behave the way you want it to, bend the foils. For my prints, bending the foils on the rear wing downward made it fly nice and smoothly.

DIY Glider Kit Card - Flies Great!

Fun stuff

Johny3D

<h2> ** ADDED NEW MODEL WITHOUT BAMBU LAB LOGO (ONLY X1 CARBON) **</h2><h2>Bambu Lab Bed Scraper X1 Carbon</h2>Enhance your 3D printing setup with the Bambu Lab Bed Scraper X1 Carbon – a tool designed for precision and ease of use. This bed scraper combines a functional design with practical features to make your printing projects more manageable.With a focus on durability, the Bed Scraper X1 Carbon is designed for everyday use.&nbsp;Simply download and 3D print this tool to improve your control when removing prints from your 3D printer bed.The ergonomic design ensures a comfortable grip, making the Bed Scraper X1 Carbon a practical addition to your 3D printing toolkit.&nbsp;Upgrade your setup with Bambu Lab's commitment to practical precision and simplify your 3D printing experience.&nbsp;If you like the Voronoi pattern, you can check my other bed scrapers:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/80151#profileId-85120" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/271230/2023-12-03_35e9655b5d1d4.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/80139#profileId-85123" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/271230/2023-12-04_758d9e81d03b.png"></a><h3>Recommended settings:</h3><ul><li>4 walls</li><li>0.2 mm layer height</li><li>15 % infill</li></ul>Thanks for your ratings and comments! Really appreciate it.

Garden/House

Air Brush files

BAMBU STUFF

Fun stuff

Tools