User

This is a butterfly knife kit card. This is just a trainer (not a functional knife) to do tricks on. It is a great gift for someone who wants to learn how to use a butterfly knife and only takes 1.5 hours to print and 5 minutes to assemble. All you have to do is to cut out all the parts and use the screws to connect the handles to the blade. It's fine if the screws don't fit flush, as long as they get in its good enough.&nbsp;Print Settings:0.12mm layer height15% honeycomb infill3 wallsSupports are optional for better results &nbsp;EDIT: I added a new, heavier and sturdier version of this kit card which takes ~2 hours to print.

Butterfly Knife kit Card

title

OwenTF

This is a revised version of my first balisong design. This new design is balanced better for flipping, very durable, and easier to print. There are also many options for customization. <ul><li>There are a variety of blade designs to choose from.</li><li>It can be fully printed or made with M3 screws, specs linked <a target="_blank" href="https://www.mcmaster.com/91290A117/" rel="nofollow noopener">here.</a></li><li>There is a choice between handles that flair out or close completely. (The balisongs in the thumbnail have flared handles)</li></ul>I have included a step file of a blank blade so its easier for others to make their own blade designs. If you create your own blade design please post a remix. I would love to see what you make! If you enjoy the design a like or make would be appreciated.&nbsp;Check out my new Banana Switchblade <a target="_blank" href="https://makerworld.com/en/models/480959#profileId-392609" rel="nofollow noopener">here.</a>&nbsp;You can find my other toy knife designs <a target="_blank" href="https://makerworld.com/en/@OwenTF/collections/608169" rel="nofollow noopener">here.</a>&nbsp;You can obtain a commercial license to sell prints of this <a target="_blank" href="https://www.printables.com/@OwenTF_1791221#join:894" rel="nofollow noopener">here</a>.<h3>Print Settings</h3>Resolution:0.12Infill: 100%Notes:<ul><li>If the threading on the pins is too tight try scaling them down a little in the x and y direction.</li><li>Printing using filament with enhanced mechanical properties such as a PLA Pro or PLA tough variant significantly increase durability.</li><li>Using a generic plastic lubricant on the pin and handle contact points provides much smoother flipping.</li><li>Printing the handle vertically provides the best surface finish. This can be difficult for low end printers so the design has also been optimized for printing horizontally.</li><li>Tightening the screws too much will stop it from flipping and tightening too little can make it rattle a lot. Try to find the sweet spot between the two.</li></ul><h3>Vertical Printing Orientation</h3>Higher quality finish<figure class="image image_resized" style="width: 43.17%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000186100/design/2024-02-14_lqcb37k65m7b.png"></figure><h3> </h3><h3>Vertical Printing Orientation</h3>Faster Print<figure class="image image_resized" style="width: 42.64%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000186100/design/2024-02-14_f7h7w6y3ovst.png"></figure>

Balisong Trainer (Hardware Optional)

K2_Kevin

Other sizes (4x3, 4x5, 4x6) available here: <a target="_blank" href="https://makerworld.com/en/models/201205#profileId-221569" rel="nofollow noopener">https://makerworld.com/en/models/201205#profileId-221569</a>&nbsp;Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!&nbsp;&nbsp;PRINT SETTINGS:<ul><li>Layer Height: 0.2mm</li><li>Supports on drawers only: RECOMMENDED (Tree Supports on front lip ONLY)</li><li>Build Plate: I recommend using GLUE / Nano Polymer to prevent warping!</li></ul>&nbsp;What&#39;s changed &amp; reimagined?<ul><li>Added drawer stops!!! Don&#39;t accidentally spill your screws.</li><li>Added alignment space for easy stack-ability</li><li>Added large magnet top</li><li>Smooth sided version so they sit close together without gaps.</li><li>28 Drawer slots</li><li>Included my own and original no scoop drawers</li><li>Compatible with all original drawers.</li><li>6x3 magnets with glue. Glue in hole(s), then use another magnet on top to slide/drop them in place.</li></ul>Video of the ScrewUnit in action! <a target="_blank" href="https://www.tiktok.com/@k2_kevin/video/7333459188099730719?is_from_webapp=1&amp;sender_device=pc&amp;web_id=7287757770546497067" rel="nofollow noopener">https://www.tiktok.com/@k2_kevin/video/7333459188099730719?is_from_webapp=1&amp;sender_device=pc&amp;web_id=7287757770546497067</a>&nbsp;&nbsp;Reimagined design of Modbots organizer.ModBots Original: <a target="_blank" href="https://thangs.com/designer/Modbot/3d-model/Voron%200.1%20Hardware%20Organizer-23915" rel="nofollow noopener">https://thangs.com/designer/Modbot/3d-model/Voron%200.1%20Hardware%20Organizer-23915</a>

title

adf

l