Uncle Pookysan

Syphander

I was not happy with the pendant shades that were originally on this fixture so I designed new ones. These are printed in Bambu PLA Basic blue-grey, Bambu PLA matte grey, and Bambu PLA matte white.

Pendant lamp shade

Home Goods

ByteSlinger

This is a detailed T.A.R.D.I.S. lamp which uses the LED Lamp disk <a target="_blank" href="https://uk.store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">available from the Bambu Lab store</a>.&nbsp;This famed TARDIS from Doctor Who stands just over 17cm tall when built and (whilst it helps and may improve quality), can be printed almost as pictured without an AMS (with the exception of the sign on the door). Prefer a multi-material verision? <a target="_blank" href="https://makerworld.com/en/models/163780" rel="nofollow noopener">An AMS friendly multi-material version is also available here</a>&nbsp;<h2>0.2mm and 0.4mm nozzle versions</h2>I have also included two versions of both the sign on the door, and the signs at the top, one version that is compatible with a standard 0.4mm nozzle, and one version which uses the finer detail capable with a 0.2mm nozzle allowing for a more accurate representation of the actual TARDIS. The simplfied 0.4mm top sign however can be printed multi-colour without an AMS, just print it face down, with the first layer black, and the rest white.  Update: I&#39;ve uploaded an additional profile which includes the more detailed top signs which are designed for printing with a 0.2mm nozzle, but if printed upright, you can actually still print them with a 0.4mm nozzle. It is worth noting though that whilst this full detail top sign can be printed with a 0.4mm nozzle in this orientation, it will require an AMS. If you can only print with a 0.4mm nozzle and don&#39;t have an AMS (or other multi-material setup), please use my simplified top sign. You can see in these pictures I&#39;m holding the 0.4mm versions next to the 0.2mm versions which are fitted to the Tardis:<figure class="image image_resized" style="width: 55.62%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163764/design/2024-01-18_66aacda2c09bf.jpg"></figure><figure class="image image_resized" style="width: 55.47%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163764/design/2024-01-18_dcba49758769b.jpg"></figure>Three Top Sign Versions Comparison:<figure class="table" style="width: 93.4%"><table class="ck-table-resized"><colgroup><col><col><col><col></colgroup><thead><tr><th> </th><th>0.2mm Top Sign</th><th>0.4mm Top Sign</th><th>Detailed 0.4mm Top Sign</th></tr></thead><tbody><tr><th>Profile Location</th><td>Detail Parts for 0.2mm Nozzle</td><td>All Parts</td><td>Detailed Top Sign (0.4mm)</td></tr><tr><th>STL Name</th><td>Top Sign.stl</td><td>4.0 Top Sign.stl</td><td>Top Sign.stl</td></tr><tr><th>Orientation</th><td>Face down (text against bed)</td><td>Face down (text against bed)</td><td>Upright (printed on long thin edge)</td></tr><tr><th>AMS Required</th><td>Yes</td><td>No</td><td>Yes</td></tr><tr><th>Nozzle Size Required</th><td>0.2mm</td><td>0.4mm</td><td>0.2mm or 0.4mm</td></tr><tr><th>Photo</th><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163764/design/2024-01-19_8977f0fa2034f.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163764/design/2024-01-19_8bacabfddd392.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163764/design/2024-01-19_49dacf7ff1d62.jpg"></figure></td></tr></tbody></table></figure>Two Door Sign Versions Comparison:<figure class="table" style="width: 90.42%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><thead><tr><th> </th><th>0.2mm Door Sign</th><th>0.4mm Door Sign</th></tr></thead><tbody><tr><th>Profile Location</th><td>Detail Parts for 0.2mm Nozzle</td><td>All Parts</td></tr><tr><th>STL Name</th><td>Door Note.stl</td><td>4.0 Door Note.stl</td></tr><tr><th>Orientation</th><td>Face down (text against bed)</td><td>Face down (text against bed)</td></tr><tr><th>AMS Required</th><td>Yes</td><td>Yes</td></tr><tr><th>Nozzle Size Required</th><td>0.2mm</td><td>0.4mm</td></tr><tr><th>Photo</th><td><figure class="image image_resized" style="width: 58.16%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163764/design/2024-01-19_fee60d1256a9b.png"></figure></td><td><figure class="image image_resized" style="width: 60.11%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163764/design/2024-01-19_86b69fd33d022.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>The Parts Explained</h2>As I&#39;ve designed this to be printable with or without an AMS, there are quite a few parts and I&#39;ll explain each of them below:<ul><li>0.4 Door Note - This is the sign for the door simplified to allow printing with a 0.4mm nozzle</li><li>0.4 Top Sign - This is the sign at the top of the TARDIS saying “POLICE BOX”, simplified to allow printing with a 0.4 mm nozzle. This should also be printable without an AMS by printing it face down, printing the first layer in black, and then switching to white from the second layer.You&#39;ll need 4 of these.</li><li>Base Cap - This screws into the base to hold the LED lamp in place once fitted</li><li>Door Handle - This is the main door handle. It can be printed with a 0.2mm or 0.4mm nozzle, but if you&#39;re using a 0.2mm one for the signs anyway, print this with them as you&#39;ll get better detail with that.</li><li>Door Note - This is the sign for the door designed to be printed with a 0.2mm nozzle</li><li>Key Hole - This is the keyhole on the door. It can be printed with a 0.2mm or 0.4mm nozzle, but if you&#39;re using a 0.2mm one for the signs anyway, print this with them as you&#39;ll get better detail with that.</li><li>Light Cap - This is the blue cap that sits on the top of the light columb on the top of the TARDIS. This should just push fit onto the light.</li><li>Mini Door Handle - This is the slightly smaller handle which sits next to the sign on the door. It can be printed with a 0.2mm or 0.4mm nozzle, but if you&#39;re using a 0.2mm one for the signs anyway, print this with them as you&#39;ll get better detail with that.</li><li>Reflector - This fits to the underneath of the lid and is designed to reflect the light shining up from the LED disk outwards onto the windows. You&#39;ll want to print this white unless you wanted to tint the colour of the light that hits the windows.</li><li>Reflector screw - This screws down into the reflector and then the other side into the base of the lid</li><li>Tardis Body - This is the bulk of the Tardis body. This requires some support material at the bottom for where the LED light is fitted</li><li>Tardis Lid - This is the top part of the Tardis, and the only other part that requires support material.</li><li>Top Light - This is a thin white column which pushes into the top of the lid</li><li>Top Sign - This is the sign at the top of the TARDIS designed for printing with a 0.2mm nozzle. I don&#39;t believe this version will print without an AMS. You&#39;ll need 4 of these</li><li>Window Inserts - These are the windows which slot in on the inside of the body. You&#39;ll need 8 of these.</li></ul>&nbsp;<h2>Assembly Instructions</h2>Once everything is printed follow the steps below.Please note, much of this will just push-fit and clip into place, but some parts such as the door handles, keyhole, and possibly the windows, may require the tiniest dab of glue to nicely fix them in place.<h3>Step 1</h3>Take the reflector screw, and screw it into the bottom of the reflector, then screw that whole unit into the base of the lid.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163764/design/2024-01-18_5551878c8c585.jpg"></figure><h3>Step 2</h3>Take the top signs, push one end into the spacing on the lid, then run your finger along it and push the rest in place. Then take the top light and push the thinner end down into the top of the lid, The thicker section should push a few mm down into the lip. Finally click the light cap down onto the top of the top light.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163764/design/2024-01-18_edaad66b9230d.jpg"></figure><h3>Step 3</h3>Take the windows 1 at a time and insert them into the frames on the inside of the tardis. These may need a tiny dab of glue on the outer edge to keep them in place. If glue is required, give it a chance to dry before continuing.Then affix the two handles, the door sign, and key hole to the front of the TARDIS (these will very likely require the tiniest dab of glue)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163764/design/2024-01-18_f49aaf3eb015d.jpg"></figure><h3>Step 4</h3>Remove the support material from underneath the TARDIS Body. This may take a bit of work (try using a pair of pliers to help you), and ensure it&#39;s clean and free of any interface layers to make sure everything will fit. Then take the LED lamp (any LED light which is 59.5 x 8.25mm should fit, but this was designed with the LED Lamp Kit-001 from the Bambu Labs store in mind) and slot it into the base, then screw the base cap on.<h3>Step 5</h3>Line the lid up, slot it down onto the body, flick the switch on, and enjoy your new TARDIS lamp. Alons-y!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163764/design/2024-01-18_f278aff00ff9c.jpg"></figure>&nbsp;<h2>Printing Instructions</h2>I&#39;d advise using my profiles for printing this as I&#39;ve ensured everything will print well, but here&#39;s some notes:<ul><li>Print everything at 0.1mm layer height or smaller</li><li>Whilst I&#39;ve included versions of the signs specifically for 0.2mm nozzle, if you are printing them with a 0.2mm nozzle, also print the door handles and key hole with them too.</li><li>If you&#39;re printing the signs with an AMS, print them face down.</li><li>The TARDIS Body requires support material under the base to support the area the LED will be fitted and the underneath of the first layer of the screw fitting. I&#39;d highly suggest tree supports here, and if you are slicing it yourself, please reference the areas I&#39;ve painted for supports in my profile.</li><li>The TARDIS Lid requires support for the bottom two bottom layers of each of the 4 sign slots. Do NOT allow any infil on any of the areas underneath the lid (such as where the screw fitting is).</li><li>I had no problem printing the door handles and keyhole as they are, but if you do tend to have adhesion problems, you may want to add a brim to these.</li></ul><h2>Print Profiles</h2>I&#39;ve included three print profiles.1 - One includes everything you need to print this with a 0.4mm nozzle, spread over 3 print plates:<ul><li>Blue Parts</li><li>White Parts</li><li>Detail Parts (Black, White, Silver / Signs, handles, key hole)</li></ul>2 - The other is for printing with a 0.2mm nozzle and includes just one plate which features the 0.2mm signs, the handles, and the key hole).&nbsp;3 - I&#39;ve uploaded an additional profile which includes the more detailed top signs which are designed for printing with a 0.2mm nozzle, but if printed upright, you can actually still print them with a 0.4mm nozzle. It is worth noting though that whilst this full detail top sign can be printed with a 0.4mm nozzle in this orientation, it will require an AMS. If you can only print with a 0.4mm nozzle and don&#39;t have an AMS (or other multi-material setup), please use my simplified top sign.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163764/design/2024-01-30_5866839d81547.jpg"></figure>My <a target="_blank" href="https://makerworld.com/en/u/2704005013/collections/510902" rel="nofollow noopener">TARDIS collection</a> currently includes:<ul><li>Tardis Light box<ul><li><a target="_blank" href="https://makerworld.com/en/models/163780" rel="nofollow noopener">AMS Multi-Material Version</a></li><li><a target="_blank" href="https://makerworld.com/en/models/163764" rel="nofollow noopener">No-AMS Print Colours Separately Version</a></li></ul></li><li><a target="_blank" href="https://makerworld.com/en/models/163694" rel="nofollow noopener">Tardis Storage Box</a></li><li><a target="_blank" href="https://makerworld.com/en/models/163730" rel="nofollow noopener">Tardis Phone Stand</a></li></ul>

TARDIS LED Lamp

Phillip

jarvizar

3d miniature of 24 Hours of Le Mans!&nbsp;Includes an AMS-compatible multicolor print profile highlighting Circuit de la Sarthe!&nbsp;Model created in Blender primarily using data from the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> addon.&nbsp;&nbsp;Check out my collection of other miniatures: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/146964" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/146964</a>&nbsp;Collection of Motorsport Miniatures: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/450282" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/450282</a>&nbsp;<h3>Slicing & Printing Details</h3>&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls (can also enable “Detect Thin Walls”).&nbsp;The included “Designer Profile” should have the above settings pre-applied and is ready to slice & print!&nbsp;Filament used in photos: Sunlu Matte White (miniature), Bambu Matte Charcoal/Black (frame), Sunlu Sky Blue (water)&nbsp;<h3>Framing Details</h3>&nbsp;This model measures almost exactly 7.5x9.5in (242.31mm X 191.08mm) and should fit most 8x10 frames (assuming frame lip/overlap is around a half-inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;&nbsp;I also included a large printable frame designed to fit my large miniature cities!&nbsp;Note: This is a “large” miniature and will not fit the smaller ~5x7inch printable frame included with the other miniature cities!&nbsp;&nbsp;Personally I use these cheap 8x10 frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B08XVP48KQ" rel="nofollow noopener">https://www.amazon.com/dp/B08XVP48KQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a> (not needed for this model since there is no “water”)&nbsp;&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;&nbsp;See my <a target="_blank" href="http://patreon.com/jarvizar" rel="nofollow noopener">Patreon</a> for a commercial license, early downloads, polls towards future models, and more!&nbsp;

24 Hours of Le Mans 3D Miniature

Gifts

coppertop_01

Miranda Class NCC-1864 USS Reliant 1:1000 detailed in 4 colors.&nbsp;I had some first layer delamination as you can see in the pictures, might want to add a brim in you have adhesion issues.&nbsp;Please note that the STL files are in 1:2000 scale, so they will need to be scaled up to match the 1:1000 scale in the 3MF file

NCC-1865 USS Reliant 1:1000 scale

vehicles

emmaginn

<h2>Diamond Design Planter with Hidden Drip Tray</h2>Resize as needed. Hope you like it!&nbsp;Commercial Licensing: <a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Patreons</a> also have the opportunity to use commercial licenses for their own creative projects, adding versatility and potential income streams.&nbsp;If you like this, please be sure to check out my <a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Patreon</a> where I upload many of my designs exclusively for members. Hope you like them!&nbsp;<figure class="image image_resized" style="width: 57.27%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000169914/design/2024-05-06_43c269eba0e6.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Stacker Planter/Vase with Hidden Drip Tray</a>&nbsp;<figure class="image image_resized" style="width: 58.89%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000169914/design/2024-05-02_c4986346dbaf9.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Rivers Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 58.58%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000169914/design/2024-05-02_ac819f1c0e73c.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Slice Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 55.7%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000169914/design/2024-05-02_351443b9c636b.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Ripple Propagation Planter with Stand</a>

Diamond Design Planter With Hidden Drip Tray

plant stuff

dieggs

A full set of cannon for the benchy. Give to your benchys a great new look

Benchy Warboat

Benchy

Creatività in 3D

<h2> </h2><h2> </h2><h2>TIC-TOC v1</h2>&nbsp;Table or wall clock with quartz movement.Watch designed on Fusion 360&nbsp;Printed on 9 plates, each plate corresponds to a layer of the watch which will be assembled with glue.Each plate contains the bodies of the objects to be printed, all separate, therefore colorable as desired.The assembly takes place in layers and the watch allows you to insert a quartz movement that can be purchased on Amazon like this one:&nbsp;<a target="_blank" href="https://amzn.eu/d/gyWmsSv" rel="nofollow noopener">https://amzn.eu/d/gyWmsSv</a> with 28mm long shaft or 1.10 Inches&nbsp;The clock has a hole to hang it on the wall but the support base for the desk\table is included in the files&nbsp;<h2>For Assemble:</h2>&nbsp;Layer 1<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_2d0f4cdc496b4.png"></figure>&nbsp;Paste Layer 2 as follows, so on for all the layers as in the images<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_31b277779671f.png"></figure>Layer 3<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_bbbcf1f8a87e.png"></figure>Layer 4 *Pay attention to this step, the frame indicates the minutes, align them with the hole to hang it on the wall (12 o'clock)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_427e67b6950c6.png"></figure>Layer 5 *Pay attention to this step, the frame indicates the hours, align them with the hole to hang it on the wall (12 o'clock)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_04f06e78c5afd.png"></figure>Layer 6<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_95024f9d480ff.png"></figure>Layer 7<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_d8beb0ac08a22.png"></figure>Layer 8<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_c683ca6375c3b.png"></figure>Layer 9<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_508c2dc9f1af1.png"></figure>Finish result<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_8c6b26f5cd074.png"></figure>&nbsp;In the images the pieces are still uncut to make room for the quartz movement. It was deliberately left to visualize the assembly of the components more easily&nbsp;I hope you like my work, I had to carry out several tests before finding the right compromise to share with all of you.The start date of the project is imprinted on the watch.&nbsp;Good job everyone and color the clock and its components as you like&nbsp;

TIC-TOC v1 Table or wall clock

Mecha

DnaarO

Excellent desk mount for xbox controller. I have implemented a modification to prevent the sync button being pressed by mistake. I recommend printing from profile with .20mm strong settings for better toughness.&nbsp;<a href="https://www.buymeacoffee.com/dnaaro" target="_blank" rel="nofollow noopener"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee"></a>

Xbox controller desk mount

Toys

alvarodiezdj

Support to place M4 or AR15 on the wall

M4 AR15 MOUNT

Tools

Bananana

Works very well, Wihout glue, And fits

Kerambit knife fidget toy

Cosplay

Martin Kozak

<h3>Print instructions for frame</h3>To achieve wider range of movement, I had to modify 4 pieces of frame parts. Don't forget to print them. Rest of the frame parts are the same as the original DUMMY 13. It is recommended to print frame from PETG.<h3>Print instructions for armor</h3><ul><li>0.2 mm, 3 perimeters</li><li>Parts are pre-oriented to the printbed.</li><li>Some armor parts require supports. Namely: armor_helmet.stl, armor_hip_left.stl, armor_hip_right.stl, armor_chest.stl, armor_knee_left.stl, armor_knee_right.stl, armor_visor.stl</li><li>For your convenience, use provided 3mf files with all the necessary parts and settings for Bambu</li></ul><h3>Assembly</h3>For assembly, please follow <a target="_blank" href="https://photos.app.goo.gl/4J47inFht7c7vTq69" rel="nofollow noopener">BUILD GUIDE</a>. Some steps are slightly different from the original. Note: kneepads might use a drop of glue to hold better in place.

Medieval full plate armor for DUMMY 13

Figures

hYPERfOCUS

This is a fidget toy and educational model I designed which uses four beveled gears meshed together. It can be used to explain gear ratios (turns at 2:1 to the body), beveled gears, gear meshing, etc.&nbsp;You can print all in one colour, but it looks best with gears being a different colour to the body and screws. It would also look great with four gears all of different colours.