Tyzurial

Tomasz Janota | TomsDragonPaws

Fully movable dragon with a movable jaw ATTENTION:&nbsp;There are a few version<ul><li>No eyes -&gt; dragon with movable jaw and no eyes; here you can insert glass eye or you can print separate eyes (raw stl)</li><li>Merged eyes -&gt; dragon with movable jaw with merged eyes; you don&#39;t need to insert eyes</li><li>Merged jaw -&gt; dragon without movable jaw; with merged eyes</li></ul>SCALE: 100% scale is for glass eye 6mm; you can resize the dragon if you need&nbsp;ASSEMBLING the head Everything is printed in place except the movable jaw and eyes depending on the configuration If you have the No Eyes version, I recommend gluing the eyes first (with glue or modeling clay) and then painting/attaching the jaw COMMERCIAL LICENSE I do not allow the sale of files or printed models, both original and remixed; If you want a commercial license to sell prints, please contact me <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000138823/design/e1c5efd1-d7d4-4ba9-adbb-bf8cbf901486">    <a target="_blank" href="https://buymeacoffee.com/tomaszjanoz" rel="nofollow noopener">Buy me a coffee   </a>&nbsp;p.s. I&#39;d love to see your versions, so share photos of your prints! :)

Articulated dragon with movable jaw

Wiff

cyanidesugar

Everyone&#39;s favourite moody teen - in all his HueForge glory. Final Fantasy 8 is my favourite in the franchise, and I will be uploading more from the game in due course. Enjoy!!&nbsp;The included 3MF file has all the necessary swaps already loaded in. You will just have to make sure your AMS/filament swaps are in the right order. As with all HueForge prints, an AMS is not neccessary at all, though it will make things easier. If you do not want to use the Bambu 3MF, you can use the STL and follow the instructions below: &nbsp;Print Instructions:<ul><li>Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm</li><li>The Model is 240.02x134.86mm in size You may print at higher layer heights below the Min Depth of 0.6mm </li></ul>Filaments Used:- PLA Kingroon Black Transmission Distance: 0.1 - PLA Chrominal Chestnut Brown Transmission Distance: 3.5 - PLA Chrominal Penumbra Gray Transmission Distance: 6.9 - PLA CC3D Orange Transmission Distance: 6.5 - PLA CC3D Lemon Yellow Transmission Distance: 6.8 - PLA Kingroon White Transmission Distance: 5.8 This print uses 6 unique filaments&nbsp;Swap Instructions:- Start with Black - At layer #13 (0.68mm) swap to Chestnut Brown - At layer #16 (0.8mm) swap to Penumbra Gray - At layer #23 (1.08mm) swap to Orange - At layer #28 (1.28mm) swap to Lemon Yellow - At layer #31 (1.4mm) swap to White for the rest. _________________________________________________If you&#39;d like my work and would like to support me, you can now subscribe to a <a target="_blank" href="https://than.gs/u/1216387?plans=true" rel="nofollow noopener">Thangs membership plan!</a>&nbsp;Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models. _________________________________________________

Squall Leonhart (FF8) - HueForge Print

jetpad

Here’s a model that allows you to create your own custom filament colors. This process involves printing a model that itself functions as 3D printer filament. You choose the colors to use and they are blended during the printing process to form a single, uniform new color filament. Once printed, this filament can be used just like standard filament to add custom colors to your 3D printing projects!&nbsp;Note: This color mixer is designed to produce unique, uniform color filaments, rather than creating filaments with the changing colors and multicolor patterns typical of dual or dichromatic filaments.&nbsp;How It Works:&nbsp;To create your new color, choose from two to four colors to fill the designated slots. Depending on your choice and combination, you can achieve various color effects:<ul><li>Two-Color Blend: Achieve a balanced mix by using two colors in a 1:1 ratio, or create a dominant/subtle effect with a 3:1 ratio. For best results, alternate the colors in the four slots.</li><li>Three-Colors: Mix three colors using a 1:1:2 ratio for dynamic and surprising outcomes. Avoid placing the same color in adjacent slots to maximize the mixing effect.</li><li>Four-Colors: Experiment with four different colors. This is ideal for specific needs, though it may result in a darker, more muted tone.</li></ul><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-13_01dff3d232a5b8.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-13_16f8f1af672bf.png"></figure></td></tr></tbody></table></figure>Color Mixing Tips:<ul><li>Use only one slot for darker shades like Navy Blue or Black to prevent overpowering other colors.</li><li>Light colors, such as light pink or white, are best mixed in a 3:1 ratio with darker filaments to enhance visibility.</li><li>For equally dominant colors, alternate them in the slots for a more harmonious blend.</li></ul>Printing Guidelines:<ul><li>The resulting filament will appear as if the colors are still separate, but true blending occurs when the filament is re-fed into the printer.</li><li>To avoid adhesion issues, especially with materials like PLA and PETG, consider using a Bambu Textured PEI Plate. Dedicate one side of the plate to each type of plastic.</li><li>Regularly clean your printer bed to ensure flawless adhesion and pristine print quality.</li></ul>Explore Our Creations: See the magic for yourself with <a target="_blank" href="https://makerworld.com/en/models/136663#profileId-149962" rel="nofollow noopener">LARRY the Tiny Dino</a>, our featured model demonstrating the vibrant possibilities of our custom-mixed filaments using standard Bambu Lab Matte PLA colors.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-11_bc7db0e6c6235.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-11_10c21f72d1c86.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-11_5f5ffe335267e8.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-11_4431a7548b5e88.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-11_9f3a50f4ff7c88.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-11_8338251e448918.png"></figure></td></tr></tbody></table></figure>Happy Printing!&nbsp;<h4>Check out these other custom filaments you can make: <a target="_blank" href="https://makerworld.com/en/models/438259" rel="nofollow noopener">  Tricolor</a>   <a target="_blank" href="https://makerworld.com/en/models/446943" rel="nofollow noopener">Quad-Color</a>   <a target="_blank" href="https://makerworld.com/en/models/477652" rel="nofollow noopener">Stratified</a></h4>

Filament Color Mixer

3D Printer

Balzo98

Here for you my Calcifer Lamp!For this lamp you will need:<ul><li>E14 lamp holder</li><li>electric cable</li><li>switch</li><li>electrical plug</li><li>E14 LED small light bulb</li></ul>&nbsp;You will need this specific E14 lamp holder:<img src="https://www.tecnomat.it/pub/media/catalog/product/b/2/d/1/portalampada_arditi_e_in_materiale_termoplastico_liscio_colore_bianco_25001873_picture.jpg?auto=webp&width=602&height=602&quality=100&bg-color=255,255,255&fit=bounds&format=jpeg" alt="PORTALAMPADA ARDITI E14 IN MATERIALE TERMOPLASTICO LISCIO COLORE BIANCO">&nbsp;It has a diamater around 27mm.Here a link from amazon:<a target="_blank" href="https://www.amazon.it/Portalampada-Plastica-Attacco-Camicia-Confezione/dp/B07RN5K5LT/ref=sr_1_15?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=268CZWSHD2K5D&keywords=portalampada%2Be14&qid=1707120754&refinements=p_85%3A20930965031&rnid=20930964031&rps=1&sprefix=portalampada%2Be14%2Caps%2C122&sr=8-15&th=1" rel="nofollow noopener">https://www.amazon.it/Portalampada-Plastica-Attacco-Camicia-Confezione/dp/B07RN5K5LT/ref=sr_1_15?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=268CZWSHD2K5D&keywords=portalampada%2Be14&qid=1707120754&refinements=p_85%3A20930965031&rnid=20930964031&rps=1&sprefix=portalampada%2Be14%2Caps%2C122&sr=8-15&th=1</a>&nbsp;For the switch, cable and plug you can choose what you want.&nbsp;The only other item you will need is a small E14 LED light bulb.It's important that it has to be LED so it doesn't get too hot.I suggest to you fridge LED bilb like this one:<img src="https://m.media-amazon.com/images/I/61RGXZ34LEL._AC_UF894,1000_QL80_.jpg">&nbsp;The assembly is really easy, you only need to mount the lamp holder to the “CalciferLampBulb” and make the electrical connections.Then you only need to insert the “CalciferLampBulb” with the lamp inside the “CalciferLamp”.I printed this in one color then painted with acrylics but i think you can print it with the AMS.For any doubts do not hesitate to contact me.&nbsp;Hope you enjoy this model!PS on my profile you can find other Calcifer items!

Calcifer Lamp

Kids

RileyDesigns

This is dragon scale chainmail, a print in place multi-use flexible fabric. This chainmail can be used from anything from a satisfying fidget toy to an integral part of you cosplay or costumes. This model is strong so feel free to play till your hearts content or weather it to deataile a costume. This model can be colored via bambu studio. For best results use a small layer height, but .2 works just fine. I have included multiple models in the raw model files including a single piece so you can make your own custom shapes. Everything but the single chainmail link stl file is reduced so it slices fast so beware of using high resolution shapes with this model (before this model was redeuced at a 20x20 chainmail it was over 34 million triangles). If there are any shapes you would specifically like Id be happy to make them and upload it as a profile.&nbsp;MeasurementsEach side of the hexagon is 7mm in lengthDistance from center to center to link the chainmail together should be 13mm horizontally, and to get the second row of chainmail is over 6.5mm up 11mm&nbsp;Commercial licenseI have a commercial license available at <a target="_blank" href="https://cults3d.com/en/3d-model/fashion/dragon-scale-chainmail-commercial-use" rel="nofollow noopener">https://cults3d.com/en/3d-model/fashion/dragon-scale-chainmail-commercial-use</a>feel free to send me a message on Makerworld to confirm this is the right model. Or send me a DM for a comercial lisence if you dont want to go through cults3d :)

Dragon Scale Hexagonal Chainmail - Print in place

Gillithonnen

This is a right-exiting (when viewed from the front of the printer) hose adapter for the exhaust port on the X1C with clearance for the AMS Hub. The adapter attaches to the enclosure by repurposing one of the holes used to hold on the rear panel, and the three spare holes along the perimeter of the exhaust port.&nbsp;There is an optional gasket that you can print in TPU, or can be printed in PLA to use for checking the fit of the adapter.&nbsp;Objectives for this remix:<ol><li>Add clearance for the AMS Hub on X1C printers</li><li>Add a fourth mounting point, by using the existing threaded hole used to attach the rear panel, to better secure the adapter on all four sides.</li><li>Create a gasket for a better seal and vibration reduction</li><li>I&#39;m not sure if this is a QC problem, or if the X1C has a slightly different hole pattern than the P1S, but the top hole was slightly higher than the original model&#39;s position. This remix elongates the top hole by 1 mm to accommodate.</li><li>Optimize the supports. This remix saves nearly 56g of filament by switching to tree supports! The remix only prints supports on the build surface, to reduce the difficulty of removing supports and possibility of damaging the model. </li><li>Fill a void in the original model that caused a weakness in the lip of the adapter, which can cause the lip to separate along with the supports.</li></ol>I would also like to thank the author of the original model, @DarkArtsLab, for providing the STEP files. These have made the remixing tremendously simpler!&nbsp;Tools:<ul><li>M3 x 0.5mm thread tap</li><li>2mm Hex key (for the machine screw attaching the rear panel)</li><li>Additional hex key depending on the machine screws you purchase (Ideally a low profile hex key)</li></ul>Materials:<ul><li>Four M3 x 10mm machine screws (<a target="_blank" href="https://www.mcmaster.com/91292A113/" rel="nofollow noopener">McMaster-Carr</a>)<ul><li>Note: there&#39;s enough clearance to use 12mm screws, if 10mm aren&#39;t available.</li></ul></li><li>Four M3 washers (<a target="_blank" href="https://www.mcmaster.com/93475A210/" rel="nofollow noopener">McMaster-Carr</a>)</li></ul>Instructions:<ol><li>(Optional, but highly recommended) Before tapping the three spare holes, it is a good idea to remove the rear panel so metal shavings aren&#39;t trapped inside the enclosure. You can follow the <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-rear-panel" rel="nofollow noopener">guide on the Bambu Lab Wiki</a> for removing the rear panel.</li><li>Thread tap the three spare holes around the exhaust port, circled below: <img class="image_resized" style="width: 42%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460730/design/2024-05-11_b60252f68bdae.png"></li><li>Reinstall the rear panel as needed.</li><li>Ensure the original screw to the left of the exhaust vent is removed. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460730/design/2024-05-11_b7e840961a87a.png"></li><li>Place the gasket (if you printed it) on the adapter, and then put one of the screws and washers in the top hole of the adapter/gasket. Align the hole with the rear panel and partially thread the screw.</li><li>Install the remaining screws and washers. Note: When installing the screw on the left side of the adapter, it helps to thread it in by hand, then tighten with the hex key. <img class="image_resized" style="width: 24.65%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460730/design/2024-05-11_2798ff6ed1208.jpg"></li></ol>