Typ_im_dunkelln

cover

Screenshot 2025-03-11 230656.png

Improved² Gridfinity 5 Nozzle Bin A1 (mini) 2x2

IMG_1016.jpg

IMG_1017.jpg

4x2 Gridfinity Deburring Tool & XActo Holder

IMG_1002.jpg

IMG_1003.jpg

IMG_1052.jpg

Gridfinity Bin with Knipex Insert (78 61 125/hard)

IMG_1045.jpg

IMG_1046.jpg

IMG_1047.jpg

IMG_1048.jpg

Preciva digital 150mm Caliper vertical Gridfinity

IMG_1824.jpg

IMG_1825.jpg

IMG_1826.jpg

IMG_1828.jpg

IMG_1829.jpg

Adapter: RollyToys Tractor to Bobby Car Trailer

IMG_1484.jpg

IMG_1485.jpg

IMG_1486.jpg

[Gridfinity] Shokz OpenFit Air / Airpods Holder

IMG_1362.jpg

IMG_1363.jpg

IMG_1364.jpg

IMG_1365.jpg

IMG_1366.jpg

IMG_1376.jpg

mobula7/meteor75 canopy for big-lens 14x14 camera

IMG_1709.jpg

IMG_1710.jpg

IMG_1711.jpg

IMG_1712.jpg

IMG_1713.jpg

IMG_1714.jpg

IMG_1715.jpg

IMG_1720.jpg

IMG_1721.jpg

Nazgul Eco XL5 Side Plates - Stack + VTX

3D-Printing

Gridfinity

openConnect snap with drafted insert connector

Relay Housing for Toggling Misc Devices

Corner-Foot for IKEA SAMBORD LAMP or other M12x1.5

Lenovo 135W Opengrid/Underware Multiconnect Holder

Abus Bordo Bike lock holder

Labelled Hex bit and nut holder - Gridfinity

Fuchs Spice Rack for cabinet door

4x4 Gridfinity Shelf for OpenGrid Multiconnect

Walled Enclosure Feet for 2020 extrusion Frame

Swinging Tape Holder

1x1 Gridfinity Bin for Painter's Pyramid

schmatz fatz Water Bottle Cap Lever Replacement

PTFE Bowden Magnetic Coupling for PC4-M6

Triblade Prop Box (1.6"/40mm | 5" | parametric)

Head-Strap-Mount for 2s 18650 Box for EV800D(M)

Eachine EV800DM Screw-On Button & SMA protector

Gridfinity Base for Skull Eyeglass Holder

very solid design and a great idea! but at least my router base is too big to reach the corner while the bracket is on, so I have to install this jig, clamp it in the corners and then remove the screwed bracket, which is tedious at best…

also: a single-color version with indented lettering as a default profile would be nice. I had to modify it myself (lettering -> change type to negative part -> add pause to change filament befor layer 4), so I could not print directly from the mobile app.

p.s. while re-reading the description I noticed: This probably would work nicely with a router TABLE… but not with my hand-held router…

extrawitz

Router Corner Radius Template (15–30 mm)

AMS Version  0.4 nozzle - all printers

The concept is nice, but the supports were tricky to remove, the tolerances are a little off and the pin broke instantly. I printed the bottom part again, this time diagonally, and that solved both the stability and the support issues! (PLA Basic, A1 mini)

tibubufi

Paint Shaker

0.2mm layer, 3 walls, 30% infill

Very tight and secure hold, easy to print, but imho too hard to remove... The idea of opengrid (for me at least) is to adjust everything on the fly and I have a hard time, getting those snaps out, once they're installed, making it hard to install anything else in that slot. (images with only 2 snaps are ca comparison to "normal" snaps).

mitufy

openGrid - Self-Expanding Snap

openGrid Standard, Snaps and Connectors

I love the idea and the concept and it's mostly great! My main gripes are the following:

The holes in the underside for the gridfinity magnets were ~0.75mm too small. I first tried melting the magnets in, using a hot air gun. That resulted in 4 mostly demagnetized magnets, so I drilled the remaining holes out.

Also my changeable-tip nozzles came with tools to unscrew the nozzles which don't have a place here - I added them.

Lastly (personal nitpick) my nozzles are labelled on the side, that lies down in this bin, so I flipped them over.

All those features were integrated in a freshly generated bin for notches in the stacking rim and better bottom holes.

Just for fun (and better readability) I added a color switching pause and I dropped some 4mm magnets into the nozzle-tip holes and flipped their labels' order, because I'll use mostly .2 and .4mm and wanted them on top.

Sadly the license does not allow for a posted remix, so you'll have to make do with my pictures...

Potovzuc

A1/A1Mini Nozzle Box Gridfinity

0.2mm layer, 2 walls, 15% infill

Earn this badge when visit MakerWorld more than 20 days in last 30days UTC time

MakerWorld Guardian

Earn this badge when print successful more than 100 different models and 500 hours

Pioneer Maker

Tapo C210 Security Camera Ivar Mount