They're picks... how hard can it be? ... I did it in all one color... all thicknesses to see how stiff they are in PLA. Next time, I'll just print a whole plate of the one that feels best to me. I printed with glue on the plate and had no issues with textured PEI plate and PLA basic filament. (I wanted the size marking on them this time around, but it'll be easy enough to take that off in Bamboo Studio if I want them to have a smooth surface next time when I'll only print the one size.)

I had questions when I looked at the model in maker world... I was worried the opening between the coin-slots would collect dust and junk... I wondered why they weren't closed off. But closer inspection in Bambu Studio reveled they are also open on the bottom, so they don't collect "stuff" :) Makes for a quicker print and it doesn't need any extra strength from infill, so GREAT DESIGN ! I printed it and it fit the coins perfectly! Note to designer... you might add a picture that shows the "spaces" are open at the bottom as well, I almost bypassed it thinking it would collect bit's of junk in those openings, but I'm glad I looked further into it!

Lightweight, quick to print... more than strong enough. Feels good on my feet, I have no idea if it's actually therapeutic, but it feels nice!

Perfect. printed easy, fits perfect ... just tight enough that it stays put and doesn't slide along the glass as you pull a towel off it.

This printed and assembled flawlessly using PETG ... worked exactly as advertised and I had no issues. You may wish you had just gone ahead and printed one with a hinge to tilt an AMS out of the way without disconnecting it. :) ... But this is a great design that does everything it promises and is a simple design that prints effortlessly and fits perfectly.

Printed great in PLA ... I love that it fits around the foot of the machine to hold it in place securely without any hardware... great design! The poop sometimes sticks to the top of the slide ... I think it's due to the poop being hot and causing it to "stick" the PLA printed chute that has such a low melting point... printing this in PETG would probably eliminate that issue... so it's not a design flaw, but rather a problem with my choice of plastic to use. (and a recommendation to anyone reading this ... use PETG.)

Printed and fit perfectly. Much easier to grip than the little tab that is the stock handle. the ability to hang it on the machine provides an easy storage when performing maintenance. Good design!!!

I printed a pair of these using PETG and they printed and work perfectly. I like simple designs that do what they're intended to do.

Printed in place perfectly, easily snapped free of internal supports and works great! (I printed it in PETG for a little extra heat resistance over PLA.)

What can be said? ... it printed perfectly in PLA and works great.

Well designed piece!... everything prints on one plate, easy assembly and includes PDF instructions with photos! Printed and works flawlessly... The ability to just tilt the AMS out of the way without unplugging anything, and remove the top glass makes cleaning and maintenance so much easier!

It was exactly what I was looking for, printed flawlessly, appreciate all the (optional) dividers and trays you included with the model.

Printed perfectly. What else can I say? ... (I used supports to make sure that the overhanging lip for the latches would print perfectly, but no other supports were needed.) P2S, PEI plate, PLA basic. I'll add photos just for fun, I didn't use any dividers/inserts ... and added some text to the lid.

They fit snuggly, and work perfectly. I didn't print the funnel and the openings are big enough that I have no issue filling them. (I didn't want to have to keep track of the funnel :) ) ... I live right on the ocean (relative humidity of 75% or more every day) and with all of them filled, they hold enough desiccant (I'm using silica beads) to keep things at 10% for at least 2 weeks before I needed to recharge. I think a switch to alumina desiccant should more than double that. ... or maybe just running the drying feature on the AMS2 during down-time.

Simple and quick to print, works just fine. I printed it in PLA-basic and it's not particularly durable. (the edge is getting chewed up, but then again I've used it for 20 prints or so. I'll print the next one in PETG and I suspect it'll be more durable as that plastic seems to be just a little bit harder to me.

Worked great, very efficient design for two-colors! ... the print-in-place hinge and latches work perfectly! Very happy with this design!