TwaanLab

GekoPrime

I tried another spool winder but found it finicky and delicate.I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable windersWhy pick this model:<ul><li>Prints on a single build plate</li><li>Doesn't require heat set inserts or exotic hardware</li><li>Fusion and STEP files are available, remixes welcomed</li><li>Generous clearances, simple mechanisms</li><li>Designed to be a tool, not a project</li></ul>Print time:<ul><li>~500 grams of filament</li><li>~22 hours on Bambu Lab X1</li><li>~5 minute assembly</li><li>~2 minute spool transfer</li></ul>Hardware requirements:<ul><li><a target="_blank" href="https://www.amazon.com/s?k=608+bearings" rel="nofollow noopener">14x 608 skate bearings</a></li><li>A scrap of PTFE tubing</li><li>An electric screwdriver or drill with <a target="_blank" href="https://www.homedepot.com/p/DEWALT-MAXFIT-3-5-in-2-Philips-Bit-DWA3PH2MF/309474882" rel="nofollow noopener">a bit cut from ¼ inch hex stock</a> (most <a target="_blank" href="https://www.amazon.com/ITP1201-SCRWDRVNG-2IN-1-IMPAC/dp/B01LZZ7AOS/" rel="nofollow noopener">cheap quick change Philips bits</a> in the US fit this requirement)</li></ul>Print settings:<ul><li>Any. I used "0.16mm Optimal" in BambuSlicer with 5% adaptive cubic infill </li><li>Use 100% concentric infill for spindle_male_driven</li><li>Try the STLs if you have a problem with the 3mf files. I’ve added (xN) to each file name so you know how many to print</li></ul>Materials:<ul><li>Any. I used Polyterra and iiidmax PLA+</li><li>Use TPU for tpu_consumable_wiper_blade. I used Priline 98a. The wiper blades aren’t 100% required but they help keep the windings nice and tight</li></ul>Assembly and usage:<ul><li><a target="_blank" href="https://youtu.be/DxgkYDrRK-U" rel="nofollow noopener">Demo video</a></li><li><a target="_blank" href="https://youtu.be/-Hy69YwRLBw" rel="nofollow noopener">Assembly video</a></li><li>The side that says “Pastamatic" needs to face outwards, away from the spool</li><li>The filament needs to come in under the target spool, like this: O____O<ul><li>[not like this: O‾”‾”‾”O]</li></ul></li><li>The drill/driver needs to run clockwise, as though you're screwing something in</li><li>Accelerate slowly until the winder gets started</li></ul>Change log<ul><li>2023-05-28<ul><li>Initial release</li></ul></li><li>2023-05-29<ul><li>Fix a minor export glitch in "leadscrew_tooth"</li><li>Increase the number of “pin_short” instances in the 3mf from 6x to 8x</li></ul></li><li>2023-05-30<ul><li>Add a second prearranged 3mf with two plates to avoid overlap warnings</li><li>Disable autogenerated brims for the single plate 3mf </li><li>Add STLs for people who have trouble with the 3mf</li></ul></li><li>2023-06-03<ul><li>Add a ring to passive_target_cradle to prevent the far end of the target spool lifting if a user lets the the drill hang loose</li><li>Add a pin to driven_target_cradle prevent the leadscrew popping out</li><li>Fix a minor clearance issue where a dovetail didn't fit quite right</li></ul></li><li>2023-09-30<ul><li>Reduce chamfer on the crossbars to prevent them falling over when bed adhesion is poor</li><li>Add some holes to the crossbars to make them easier to screw down</li><li>Add some popular acessories to the all-in-one .3mf</li><li>Add a printable spool to the all-in-one .3mf</li></ul></li></ul>How to contribute:<ul><li>Post your make, it keeps me motivated to improve the model when I see people using it!</li><li>Post your feedback, idea or remix in the comments!</li><li>There are a few improvements and accessories in development as remixes, check those out if you‘re up for the alpha/beta tester experience<ul><li><a target="_blank" href="https://www.printables.com/model/498743-pastamatic-37-mm-motor-mount" rel="nofollow noopener">Adapter for 37mm gear motor</a></li><li><a target="_blank" href="https://www.printables.com/model/556405-pastamatic-filament-spool-winder-modifications-bra" rel="nofollow noopener">Source spool holder for 5 KG spools</a></li></ul></li></ul>Credits:<ul><li><a target="_blank" href="https://www.printables.com/@MiklosKiszely_486882" rel="nofollow noopener">@MiklosKiszely_486882</a> for the original idea</li><li><a target="_blank" href="https://www.printables.com/@PsychoShaft_33891" rel="nofollow noopener">@Psycho Shaft</a> for the drag/tensioner concept</li><li><a target="_blank" href="https://www.youtube.com/@thang010146" rel="nofollow noopener">thang010146</a> for YouTube videos of mechanical mechanisms, particularly the self reversing leadscrew for a level cable winder</li></ul>&nbsp;

Pastamatic  Filament Spool Winder for Bambu X1C/P1P AMS (level winder with self reversing leadscrew)

Bambu X1C

MplusM

Marble Run 003 Battery Box Addon with On/Off Switch and Battery USB-C Charging Module for 4-Way Standard v1 Plus Addon, incl. plate for the standard Marble Run 003 version.&nbsp;Don&#39;t want to be near a power outlet all the time? Are you looking for a child-friendly solution? Then take a look at this solution for the 4-Way Standard plus Addon of Marble Run 003.As an additional option, there is also a solution for the basic marble Run 003 model.&nbsp;However, there is some work with the soldering iron. And the removal of the support is a bit tricky. So be a … little patient and careful.&nbsp;Print Instruction, “Shopping list” and Assembly:<ul><li>See documentation pdf.</li></ul>Notes:<ul><li>Tested only with original Marble Run 003 marble set.</li><li>This addon contains small parts. Please make sure that children cannot swallow them.</li></ul>Interested in more Marble Run items? Check out <a target="_blank" href="https://makerworld.com/en/@mplusm" rel="nofollow noopener">https://makerworld.com/en/@mplusm</a>

Marble Run Battery Box Addon with On/Off Switch

ADD-on

ThreeD-Michael

May I introduce my new Gyro Fidget Maker?&nbsp;(Almost) whatever you imagine, it can generate it. These and much more customization options are available:<ul><li>All dimensions,</li><li>number of shells,</li><li>with hub or without,</li><li>round or poygonal frame,</li><li>different patterns for the frame,</li><li>with or without eyelet,</li><li>monograms on the hub,</li><li>size of the chamfer.</li></ul><figure class="table"><table style="border: 3px solid hsl(210, 75%, 60%)"><tbody><tr><td>Important Note:This OpenSCAD script creates many circular objects. A high resolution makes sense so that the generated rings can move well against each other. This inevitably creates large amounts of data that Makerworlds 3MF generator cannot handle well and it may refuse downloading as 3MF.It is therefore recommended to activate the customizer option &#34;High accuracy&#34;, select the STL file when downloading and then import it into Bambu Studio.</td></tr></tbody></table></figure>Tips for beautiful multicolored objects:<ul><li>Using the Bambu Studio &#34;Cut&#34; tool, the object can be divided into an upper and lower half. Important: Activate the “Cut to parts” option. If these halves are colored differently, there are beautiful color effects when used.</li><li>If the object contains at least one monogram, my customizer will automatically create multiple parts for the hub. With the command &#34;Split to parts&#34; in Bambu Studio the object can be divided into these individual parts. If you then color the parts on the top and bottom of the hub differently, there will be nice color contrasts.</li></ul>

Gyro Fidget Maker

Open Scad

LemonArts

Micro Groot Pen Cap for stamdard colored pencils groot is only 12mm high, perfect for the 0.2mm nozzle <figure class="image image_resized" style="width:39.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/860250/2024-04-15_c277cc5c73dc9.jpg"></figure>

Micro Groot Pen Cap

0.2 Nozzle

Royal3D

Unleash your imagination with this fantastic cover designed to showcase your creativity with your beloved bricks! ⭐️⭐️⭐️&nbsp;<h3>SMILEY TIP 😊:</h3>Start your printing journey with the "Tolerance test" - since every printer has its personality, this test comes in various sizes to let you play matchmaker with your bricks (and it takes only 10 minutes).Once you've found the perfect fit and are dancing with joy over the dimensions, pick the specific LEGO base cover to print (options include 5.00, 5.10, 5.20).&nbsp;P.S. Feeling adventurous?For my A1 mini, the 5.10mm version was a perfect fit! 🌈 But hey, your printer might have its groove, so give it a whirl and see what makes it dance! 😄&nbsp;To customize my cover I used the LEGO Dots series, you can get them here:<a target="_blank" href="https://www.lego.com/en-us/search?q=dots" rel="nofollow noopener">https://www.lego.com/en-us/search?q=dots</a>&nbsp;Happy building 🤩

Lego Cover iPhone 13 PRO - (More phones on request)

Lego

SK3DP

I need a boat…No! I need a buggy…No! I need both!?! The solution: a mix and match of the famous Benchy and E3d's buggy! Quick and simple to print! (Also a great torture test!

Bug-chy (Buggy+Benchy)

Benchy

wisetait

super cute cat key hanger. cat comes out of hiding when key is on its tail! print box at .24, and tail/head at higher resolutions. support only needed on cats head. this thing is adorable and perfect for anyone who likes cats.

cute cat key holder, plays hide and seek

Mijn schatje 🥰

Piratax

Cute and easy-to-print doorstop in the shape of a slice of cheese. For best results, I recommend using the adaptive layers as shown in the attached photo.I have always made it in PLA but it is possible to make it in any material.Maybe TPU is the better solution

Cheese Doorstop

Doorstopper

wuguigui

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_a0d7ac6b0ed2b.png"></figure>Updated 20240626According to some professional suggestions, I modified the bolt parts, enlarged the hole of the bolts, add an installation tool, you can screw the bolts tight now. The new parts are “Bolt1-20240626, Bolt2-20240626, and Bolt-Tool-20240626.”, the print profile has been updated as well(Some parts&#39; positions have also been modified to avoid affecting the flow calibration line).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-06-29_0ed2874f8e5d3.jpg" width="3024" height="4032"></figure>&nbsp;Updated 20240526Good news! Many people complained about the light leak issue of the shell printed by PLA-matte filaments. Now I designed a new LED holder that combined with a light hood, can prevent light leakage effectively, you just need to print the new LED holder part(LED Holder 3.1) to replace the old one, and then you can have a perfect light effect. Assembly Instructions and Print Profile updated as well. Thank you for your boosting and support.&nbsp;<img class="image_resized" style="width: 28.89%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-16_1be03ab4152d8.jpg">  <img class="image_resized" style="width: 68.41%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-16_41f71f4510a22.png">_________________________________________________________________________________________________________________&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the hardware kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;This is a bird lamp designed for Bambu <a target="_blank" href="https://shrsl.com/4cxd4" rel="nofollow noopener">LED Lamp Kit 001</a>(This link is Bambu store Global area), you can buy it from the “Bill of Materials” at the bottom of the page if you are not from the “Global” area, it&#39;s available in the Bambu Store worldwide.Recommended filaments: Body: <a target="_blank" href="https://shareasale.com/r.cfm?b=2282157&amp;u=4048186&amp;m=138211&amp;urllink=store%2Ebambulab%2Ecom%2Fcollections%2Fpla%2D1%2Fproducts%2Fpla%2Dcf&amp;afftrack=" rel="nofollow noopener">BambuLab PLA-CF</a> (good at shading lights)or <a target="_blank" href="https://shrsl.com/4ikwx" rel="nofollow noopener">BambuLab PLA-matte</a>( Vivid colors), you can also try other <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4048186&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Bambu Filaments</a>; The Joint parts must use TPU, I&#39;m using <a target="_blank" href="https://shrsl.com/4ikxl" rel="nofollow noopener">BambuLab TPU95A HF </a>in this case.&nbsp;This model is original from my design in 2008(image below), at that time, it was hard for me to make it real in traditional ways, but now, I can do it with 3D printing:)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_692cd59a4c53a.png"></figure>&nbsp;&nbsp;After 3 iterations and countless detail adjustments, I made this warm and lovely bird lamp finally. you can see some of the improvements in the images below.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_8a26170e7d7c3.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_cabfd389a6579.png"></figure>(Modify the structure of the lamp holder to optimize the lighting effect)&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_53533acc1c079.png"></figure>(Modify the switch structure to avoid the impact of the support surface blocking switch travel, and covering the support surface)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_4b67e9ef7b456.png"></figure>(Elevate the overall height to achieve a more balanced proportion of the design)&nbsp;&nbsp;Assembly Instructions:The TPU Joint parts recommended printing infill is 80% to make it sturdy.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_7c92045833874.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_a2021883eca63.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-16_a112b862464b6.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_1b3da20114f37.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_9395ee623ba7d.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_35eb5b7a86a6d.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_116a076e29c28.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_66f9e884f14da.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_7b18e01916684.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453302/design/2024-05-04_2a79546f30a43.png"></figure>Click &#34;Like&#34; if you like it, feel free to boost me or <a target="_blank" href="https://paypal.me/wuguigui?country.x=C2&amp;locale.x=zh_XC" rel="nofollow noopener">buy me a cup of coffee</a>, thank you! Have fun!If you want to sell the printed model, you need a Commercial license at: <a target="_blank" href="https://www.patreon.com/wuguigui/membership" rel="nofollow noopener">https://www.patreon.com/wuguigui/membership</a>Watch the video to get more information:<figure class="media"><oembed url="https://www.youtube.com/watch?v=VULERVPRzDw"></oembed></figure>

Bird Lamp

Lamps

fana

&#34;One must imagine Sisyphus calibrating&#34;&nbsp;This is the result of a nightmare i had (might have to take a break from printing)&nbsp;Used AMT_industrieses Sisyphus model did some mesh rework, combined all the elements to a slope and voila!&nbsp;Planning on making a version without the benchy so you can use it a display for any of your lovely boats.&nbsp;&nbsp;

Sisyphus Benchy

Book End

sid naique

Lilypot Vase - to be printed using ‘Spiral Vase’ mode.

Lilypot [Spiral Vase mode]

Vases

fay3dlab

Here&#39;s a new suspended star wars ship and this time around i&#39;m revisiting one of my famous suspended model the Millennium Falcon..I have just modelled my own version of the Millennium Falcon using tinkercad.. you can watch the fast cut BTS video here  <figure class="media"><oembed url="https://www.youtube.com/watch?v=tF8dECfWOrs"></oembed></figure>So i rewatched the Force Awakens movie again to celebrate may 4th and i got the idea of making a new suspended model for the Millennium Falcon.. so im going to make the frame from debris of the star destroyers.. I got to work on it and i present to you the new suspended Millennium Falcon part2:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460390/design/2024-05-11_6dda8df1a4b05.jpeg"></figure>I was going to use the bambu RBG LED strips but it havent arrived yet and i cant wait to share the new ship with everyone.. so i just used leftover White LED strips.. I might print another one with multicolor and add the RGB LED strips.. we&#39;ll see..<blockquote>If you&#39;re thinking of using <a target="_blank" href="https://shrsl.com/4id36" rel="nofollow noopener">bambulab white LED strip</a>.. please use my affiliate link to buy them from the bambu store..Bambulab RGB LED Strip Light - <a target="_blank" href="https://shrsl.com/4ka5u" rel="nofollow noopener">https://shrsl.com/4ka5u</a>    </blockquote> As always i also prepped the 3mf files for multicolor prints as well.. and remember when printing suspended models.. set the wall generator to arachne from classic.. this will make the slicer print the strings.. and NO SUPPORTS..  P/S: thank you everyone who downloads my models and those who donated their precious boost token.. Every little thing helps me and I hope you&#39;ll have fun 3d printing my suspended model i make..&nbsp;<figure class="table" style="height: 162.344px; width: 960px"><table style="background-color: rgb(255, 255, 255); border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">If you would like to support me, you can join me on my <a target="_blank" href="https://www.buymeacoffee.com/fay3dlab" rel="nofollow noopener">buymeacoffee</a> page..</td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">By joining me as a supporter.. you&#39;ll be able to get behind the scenes informationon my current projects as well as future projects..</td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">And if you&#39;re looking to sell my prints.. you can join my merchant membership tier as lowas USD10 a month..</td></tr></tbody></table></figure>

Suspended Millennium Falcon Part2

variety

MacDaddy509

Printed the Headphone Stand Gamer Hair - Beard Skull Nº1 (https://makerworld.com/en/models/195526#profileId-216146) for hanging my headphones but I don&#39;t exactly have free real estate on my desk so I set out to make a wall mount for the skull and figured, might as well double down with the bearded skull theme. the arm gets 2 ruthex RX-M3x5.7 threaded inserts and I used 2 m3 screws to mount it to the wall plate.

Wall Mount for Gamer Hair - Beard Skull Nº1

Headset stands

Fresh Brewed Design

Your cat(s) deserve the freshest canned meat product and nobody wants old cat food lurking in the back of their cabinets. This dispenser serves up your cans in first-in, first-out order. The dispenser prints without supports and no hardware or glue is required for assembly.&nbsp;Design<ul><li>Holds 8 3oz cans per dispenser (note: tested with Fancy Feast cans which have about a 66mm diameter and a 37mm height - you may want to check your cans before printing if you prefer a different brand)</li><li>Cans roll smoothly from top to bottom for easy loading</li><li>Fits in a 12in deep cabinet</li><li>Slim profile makes it easy to fit multiple dispensers side-by-side</li><li>Printable on a 180x180mm print bed (e.g., Bambu A1 Mini, Prusa Mini)</li></ul>Dimensions (LxWxH) 280.5x47.6x172.8mm&nbsp;Print settings Nothing special. I test printed with PLA and slicer defaults. STLs are oriented as recommended for printing.&nbsp;Assembly Assemble by sliding the corresponding dovetails together. When assembled correctly, your pieces should all sit flush on both the interior and exterior surfaces. The dovetails should be a fairly tight fit.<ol><li>Print all four components (left front, left back, right front, right back)</li><li>Attach left front to left back and right front to right back by sliding the dovetails together. Ensure all 3 dovetails are engaged on each side. You may find it easiest to partially engage the larger dovetail at the bottom before aligning the middle and top dovetails.</li><li>Attach the left half to the right half by sliding each set of dovetails in from the bottom. You may again find it easiest to start from the bottom. Just make sure top, middle, and bottom dovetails are secure front to back.</li></ol>Notes<ul><li>If you have a larger printer, I&#39;d love your help in testing out additional sizes. I may also do a 12 can version in 6 parts if there&#39;s interest!</li><li>If you plan to remix this, be aware that most cans aren&#39;t simple cylinders. In real life, the cans sit at a slight angle due to the lip around the top. This increases their total width by enough to make a difference. The design accommodates this to avoid an otherwise dispenser-jamming amount of friction between the cans and the side wall.</li></ul>Inspiration/credits<ul><li><a target="_blank" href="https://www.thingiverse.com/thing:4428664" rel="nofollow noopener">Aeris - Cat Food Can Dispenser (modular) by Erdrick</a></li><li><a target="_blank" href="https://thenounproject.com/icon/cat-6048434/" rel="nofollow noopener">Cat icon by Kim Sun Young on The Noun Project</a></li></ul>

Cat Food Can Dispenser

Thuis

Molodos

Disclaimer: This design is inspired by the Spirograph drawing toy. &#39;Spirograph&#39; is a trademark of Hasbro, Inc. This product is not affiliated with or endorsed by Hasbro, Inc.&nbsp;Update: The parametric version 2 with some new customization options is available now, check it out <a target="_blank" href="https://makerworld.com/en/models/513791#profileId-429935" rel="nofollow noopener">here</a>!&nbsp;A simple Spirograph drawing template gear kit that leads to really cool results. Just take two gears (inner gear inside an outer gear recommended, but feel free to experiment), insert your pen and go draw cool circles. The combination possibilities are (almost) endless&nbsp;Features<ul><li>Simple design</li><li>Simple to use</li><li>Beautiful results</li><li>Select from 2 outer and 10 inner gears</li><li>(almost) endless combination possibilities</li></ul>Recommended print settings<ul><li>Layer height: 0.2mm</li><li>No supports required</li></ul>You like my work? Consider to <a target="_blank" href="https://www.buymeacoffee.com/molodos" rel="nofollow noopener">buy me a coffee</a> :D

Spirograph Drawing Template

Fidget

Jan Hroz

All printable counter in several design variations. No rubber band needed.Make sure you place the main gear and the numbered gears in the correct position as shown in the picture.The covers can be glued together.Plates:01 - Counter mechanism02 - Days since last accident03 - Coffee counter04 - Stupid questions counterFor A1 mini: 05 - Back cover06 - Dials