good print! I wish I would’ve colored the half of toothless’ tail red. oh well. next time.

these are way cooler than I anticipated! started with size 5. I wanted to do one for my kids (4 & 6 y/o) so I tried just scaling the Size 5 down to 70% & 80%. 70% was just too thin and brittle. 80% works! it’s about 12.3mm inside diameter. I printed with Bambu Basic PLA. The size 7 came out great and spins the best. (could just be the dryer filament or the colors used). Size 7 was a little big for my wife so I scaled it down and it came out great! I’ll be back for more!

Wow! idk why I’m so impressed with a 100% printed call! I’ve bought calls at box stores that were not as good as this. Yes, if you just use the air in your mouth and don’t use your diaphragm to push the air then it comes off slightly high pitch and not quite duck sounding. if you’re a mouth blower, the two reeds shown produced the best sound for me! But when done right, forcing air from your diaphragm with kind of a grunt making a “HUT” sound, this is a GREAT call! I’ll be passing these out to all the kids! thank you! I’ve hand made duck calls before, now I want to 3D model one that I’ve made and compare! I really had low expectations for a 100% printed call. now I gotta try your double reed!

Print came out great! I expected a little tighter tolerance on the joystick, but nothing to complain about. the kids will love them and lose them or break them! The pill shape slider can definitely pop out so don’t let small kids play with it. printed with Bambu Basic PLA - Bambu Green

nice print! works great! looks like my blue needs dried lol!

quick. smooth. works as intended. thank you!

printed great. supports came off easily. my niece is going to love this for Christmas! printed in Bambu Basic PLA - Bronze.

came out as expected. cute for my 4 y/o to paint. supports were a little tough to remove but came off relatively clean. if she likes this for Christmas, I’ll be back to print a scaled up version!

description is correct, supports remove very easily! My 4 y/o asked for a unicorn to paint for Christmas and this quick print came in clutch!

cool concept. I can really appreciate how well the “no AMS” parts press snug into frame. everything printed great. Total personal preference, I wish the pieces didn’t rotate so easily. it’s challenging to play with my 4y/o. I understand how difficult that tolerance can be though with the variety of printers and filaments. printed on my P1S with Bambu PLA Basic.

The print came out great. EVEN with changing the settings to ONE wall to use less filament. I didn’t know if it would fit my wife’s tea bags. I was too lazy to go measure. Turns out, it’s not quite wide enough for the tea bags. I really had to push them down in and they’re difficult to remove out the bottom opening. However, my wife hasn’t complained yet. Maybe I’m picky… Printed with Silver PLA Tough+.

this printed out great. it is doing what I wanted. more compact hanging space for my hunting underarmour. it’s been holding for two days now. printed with Bambu white PLA Tough +. I’ll test some heavier garments, might print more 🤷‍♂️

very nice! clutch last minute Halloween accessory! printed from my phone away from home! came out perfect!

I’m impressed how well this printed with such thin fins. I was also excited to find this as it fits inside a U.S. gallon milk jug. I just need to connect it to a longer rod to test how well it mixes the plastisol for my bait making!

This turned out awesome! working on some wall art. trying to 3D print an entire gun but all the externals are clear to see the internals! I used Silver PLA Tough+. I think it looks cool but I might need to print another in black or a bright color?!

4.5/5 - As intended for prop/cosplay etc. it’s a good print. The print in place hinges are a nice touch! I feel like the supports could use a little touch up or adjustment.. or use thinner layers or smaller nozzle. the bottom inside of the frames just needs some post processing. I don’t see that there’s any intention of being able to snap a lense of some sort into the frame, but if there was, there’s no way for it to stay in with the print I came out with.

great print! I like the minimalist approach. not much filament at all, no supports, efficient!