Tulach_Ard

elikoll

You have to put the ring inside the head so it fits always perfect.Show me your finished print results.

Super Mario Mushroom Car Hitch Ball Cover Towbar

Mario 

mindlessdad

Just a couple variations of the US Air Force Aim High style logo. STLs available as well as painted versions for a P1P (& AMS) in the 3mf file.&nbsp;Project and photo are examples for this as they are printed on Extra Draft settings, and manually moved to Sport mode.

Vintage Air Force - Aim High

armament things 

mcgybeer

Articulated Cobra! Includes 2 versions of a Pencil Holder, with and without texture. The Cobra can be rolled both upwards and downwards!Cobra and Pencil Holder are able to print in place with no supports. Feel free to scale it up or down as much as you want (the limit is your printer).&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/LxwNxV0ia_A"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=LxwNxV0ia_A"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/LxwNxV0ia_A" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

Articulated Cobra + Pencil Holder

animals

Jpsbuk

<h2>Roland Aira Compact Stand</h2>Simple stand to support Roland Aira Compact S1, J6, T8 or E4 modules at a more usable angle.&nbsp;Note for the stick on feet I used these from Amazon <a target="_blank" href="https://www.amazon.co.uk/gp/product/B09Y9C1BXK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.co.uk/gp/product/B09Y9C1BXK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1</a>&nbsp;STEP file added to do with as you will :)&nbsp;&nbsp;&nbsp;

Stand for Roland J6, S1, T8 or E4 Aira Compact Mod

electornics

Frank3D

Lego wing 4x2 bricks, useful to replace missing pieces. I designed these bricks with 0,2 mm of tolerance, and work good. I printed with 0,2 mm layer height.

Lego compatible 4x2 wing bricks

Lego ish. 

Felix Hauser

Here is a a size-customizable brass threaded insert inserter. It helps adding inserts to your models by keeping the soldering iron perfectly perpendicular to your workbench. It is build upon a piece of 2040 V-Slot and two calibrated 8mm rods. By cutting the V-Slot and the rods to your needs, you can keep the Insert Inserter Mk1 as large or as compact as you want.&nbsp;Bill of Materials&nbsp;Aside from the printed parts you will need:&nbsp;<ul><li>1 x Piece of 2040 V-Slot. Cut to your needs. The one in the pictures is aprox. 40cm long.</li><li>2 x M5x8 screws with corresponding T-Nuts to attach the V-Slot to the base</li><li>2 x 8mm smooth rods. Cut to your need. The one in the picture is aprox 22cm long.</li><li>1 x Surface you can attach the device on. Cut to your needs.</li><li>4 x M4x25 screws to attach the base (base.stl) to the surface. Alternative you can use chamfered wood screws.</li><li>2 x M5x8 screws to attach the top piece (profile_top.stl)</li><li>4 x Slot POM wheels</li><li>4 x M5x45 screws with lock nuts to attach the wheels</li><li>2 x eccentric nuts for M5 screws</li><li>2 x Spacers matched to the height of the eccentric nuts</li><li>4 x additional spacers. Ideally like the ones above, but they can be different as well (see Assembly guide)</li><li>2 x M3 brass threaded inserts 3mm thick (for the carriage_front.stl and carriage_back.stl parts)</li><li>2 x M3 brass threaded inserts 6mm thick (for the profile_top.stl part)</li><li>2 x long springs or some office rubber bands</li><li>2 x M3 square nuts (for the X-Carriage.stl or X-Carriage-squared.stl)</li><li>2 x M3x25 screws (for the X-Carriage_Clamp.stl or X-Carriage-squared Clamp.stl)</li><li>4 x M3x10 screws (for the carriages and profile to parts)</li><li>2 x LM8UU linear bearings</li><li>4 x small zip ties</li></ul>&nbsp;

Insert Inserter Mk1

tools

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;A <a target="_blank" href="https://makerworld.com/en/models/18035#profileId-16764" rel="nofollow noopener">base/diorama builder</a> is now available for download for this mini figure model!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018045/design/4fb50df1-8c36-4d0c-88ec-bcc8e5122b9c.jpg"></figure>___________<h3>IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS</h3>Please note that I am sharing my designs to any one to enjoy but for personal use only. I have NOT provided any commercial license to any one allowing the sale of 3d printed copies of my designs. Seeing my designs being sold for profit is discouraging for me to continue coming up with more designs. I will not hesitate to report to Etsy and other online sites if I find them being sold.__________This is a kit card of Minecraft Turtle in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)<h4>Usage Options</h4><ol><li>Assemble as is and use as toy/collectible; or</li><li>Use the alternative part with loop and glue the halves together to make for a great keychain ornament!</li></ol><h4>Printing Reminders</h4><ul><li>Print as oriented, with NO supports needed.</li><li>If you&#39;re printing in multiple colors, please note that due to several color swaps, it would take longer to print.</li></ul><h4>Difficulty Level (Easy, Medium, Hard)</h4><ul><li>Printing: Medium - Bed should be leveled well to ensure small parts stick well to the build plate. Requires printing slower during the first few layers. May require lots of filament swaps if printed in multi-color.</li><li>Assembly: Easy - Parts should fit really easy. The flippers are intentionally designed to be loose and wiggly. See pictures for correct orientation of the flippers.</li></ul>

Minecraft-inspired Turtle Mini Figure Kit/Keychain

kit cards 

Kit Crafters

Print and build your own Go-Kart from Mario Kart 8!&nbsp;This Go-Kart model kit has all the pieces to assemble a kart with spinning wheels and a compliant bending chair. The model kit is completely flat on the bottom for incredibly easy prints without supports!&nbsp;Enjoy racing!

Go-Kart Model Kit - Mario Kart 8

Protoprints

An interpretation of Starry Night by Van Gogh made for filament painting.I tried hueforging an image of the original oil on canvas as well, but the outcome didnt look as good due to the nature of the brushstrokes.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: Generic Black, Blue, Light Blue, Orange, Yellow, White PLA+ filaments.&nbsp;Swap Instructions: Start with Black At layer #3 (0.32mm) swap to Blue At layer #8 (0.72mm) swap to Light Blue At layer #13 (1.12mm) swap to Orange At layer #19 (1.6mm) swap to Yellow At layer #31 (2.56mm) swap to White for the rest. Two print profiles have been provided as 6 colors are used:<ol><li>for use with 2 or more AMS units</li><li>for use with a single AMS unit</li></ol>&nbsp;The only difference is that the single AMS profile has been set to swap back to slots 1 and slot 2 after printing from slot 4. A pause has been added before the end of the 4th color (orange) to allow for slots 1 and 2 to be changed from Black and Blue to Yellow and White respectively.In summary the print order will be Slot 1 → Slot 2 → Slot 3 → Slot 4 → Slot 1 → Slot 2.&nbsp;UPDATE: An updated experimental print profile has been uploaded with less orange and yellow. Try only if your orange/yellow filaments have a high opacity, causing the picture to look too warm.&nbsp;Protip: Reducing nozzle temps slightly (5 - 10 degrees C) may help prevent stringing on detailed prints like this that require lots of retractions.&nbsp;Happy printing! Share your makes!&nbsp;Note: Bambu Studio shows Error 920 : Non-manifold edges when slicing. This is normal for Hueforge prints. Please ignore and print away :)

Interpretation of Starry Night by Van Gogh - Hueforge - Filament Painting

kyle.sawyer2010

Gone are the days of using fuel line to create your own way to limit a shock. With the invention of the 3D printers, precision is becoming easier to obtain. And that is where we come in. Team Tactical RC, with the help of a couple of people from our awesome RC community, have come up with shock limiters in increments listed below. These limiters are color-coded based on size and are designed to fit around Traxxas Slash shock shafts. Each pack will include: 4 x .500" in Green 4 x .250" in Red 8 x .100" in Yellow 8 x .050" in White

Traxxas RC Shock Limiters

RC things

Mark Dra

This is the way!&nbsp;This is my super screen accurate bucket from Cobb Vanth/Boba post sarlac like we see in “the mandalorian” season 2.Here we have separate detail for cheek and for right ears, movable stalker and a splitted version of the bucket!I have spend several weeks collecting references, drawing , printing and correcting detail for this definitive version!&nbsp;Is this approvable!YES! Already do!&nbsp;My suggestion is 0.2 layer height, pla+ works great!&nbsp;If you like my model please consider to gime me a BOOST or two! This really help me to create new models! ;)&nbsp;

Cobb Vanth / Boba Fett post sarlacc Helmet

helmets

Stag 3D

<h3>How to play:</h3><ol><li>Setup the base on a flat surface and place the Tetra Balance block onto it.</li><li>Take it in turns with your opponent to place the blocks onto the Tetra Balance piece. You can place the blocks with one hand only and once you have chosen a bloke you cannot change it.</li><li>Repeat until the tower eventually falls. </li><li>If you cause the tower to fall your opponent wins. </li></ol>&nbsp;

Tetra Balance Game

games

cam4569

This is a remix of the original wedge to assist the AMS with retraction issues. I added the slot for the connector and PTFE tube to ride in, just to clean it up a bit and satisfy my OCD that the tube will not slip off. attached with double sided tape.

AMS retraction wedge

mods

mediaman3d

This Altoid paint tray has six 2cm x 2cm x 1.4cm deep inserts for dry/solid paint blocks. Six paint brush holders 4.6mm round and a 1.1cm x 3.6cm x 1.2cm rinse/mix insert.July 23rd 2020 Update Added V2 version that is slightly narrower to fit 90mm wide tins. Also increased the size of two of the paint brush holders to 6mm.<h3>Print instructions</h3><h3>Print Settings</h3>Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2mm to .28mm Infill: 30% Filament: Any PLA, PETG, ABS Andy Notes:Recommended to print with 3 perimeters, 4 bottom, & 4 top layers.

YAAPT - Yet Another Altoid Paint Tin Insert for Watercolor Painting

paint supplies

Asdfgasdfg

Be careful downloading prints called “Fast” etc, those might be faster but that's because of a weaker design, they are spammers just taking the original profile, lowering the integral strength to get it to print faster, and as explained below, there needs to be a balance in the force of the spring and the rubber band. Those profiles might not work as well as intended. Its just spammers racing to the bottom, give them enough attention and soon there will only be profiles with 1 wall and 2% infil thats printed in 5 minutes but falls together if you look at it long enough.&nbsp;Double action OTF fidget toy for the fidget toy design competition.&nbsp;All you need is plastic and a rubber band!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/234870/2023-11-13_2404c2f7a37e2.gif">&nbsp;If you like the idea but dislike the design bookmark the model and visit it after the competition is over and I will release all the source file so you can easily modify the body or blade/comb!&nbsp;<h2>Assembly instructions:</h2>NOTE: For the double action to work you need to have a balance between your rubber band and the springs holding the blade. You can use the strongest rubber band you can find and it wont really matter, but the switch will be harder to push. So you might want to try around with different rubber bands or different materials for the springs. If the switch is to hard for your liking, your rubber band is to strong. If the blade/comb does not fully extract or retract, your rubber band is to weak or your springs are to stiff.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=rN4wuBX-5q8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/rN4wuBX-5q8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;<h2>How it works:</h2><img src="https://makerworld.bblmw.com/makerworld/draft/234870/2023-11-18_6157ed5d0cf8b.png">