Tuck_Garage

lloydliu

为拓竹AMS设计的干燥剂盒，带有一个方便拿取的提手，以及一个经过特别设计的盒盖，盒盖带有两片刀刃型侧板，在向外翻转打开时，可以形成一个小漏斗，辅助装填分子筛或球形变色硅胶干燥剂颗粒。干燥盒分为标准型和薄型两款，分别用于放置在料盘中间的槽位空隙和紧贴边缘的窄间隙位置。&nbsp;11-22更新：1、为统一适配温度计版和标准版干燥盒，重新调整了翻盖的造型（原版本保留，可选择性打印，但互不兼容）；2、根据新的翻盖重新调整了标准型干燥盒翻盖结构（原版本保留，可选择性打印,但互不兼容）；3、缩小了薄型干燥盒的手柄，以避开料盘；4、经测试发现镂空翻盖在打印时容易出现首层不良，因此去掉了盖子的镂空；5、重新上传了所有3mf和stl文件。&nbsp;&nbsp;The drybox designed for Bambulab AMS has an easy-to-reach handle and a specially designed cap with two knife-edged side plates, that can be flipped outwards to create a small funnel to assist in filling molecular sieves or spherical color-changing silica gel desiccant granules. The drybox is available in two versions, standard and slim, and is used to place the slot gap in the middle of the tray and the narrow gap close to the edge, respectively.Update in 11-22:1. In order to uniformly adapt the thermometer version and the standard version of the drybox, the shape of the cap has been readjusted (The original version is retained and can be optionally printed, but two version are incompatible) ;2. The structure of the standard drying box was readjusted according to the new cap (The original version is retained and can be optionally printed, but two version are incompatible) ;3. The handle of the slim drybox has been reduced to avoid interfering the spool;4. After testing, it was found that the hollow cap was prone to defective first layer when printing, so the hollowing out of the cap was removed;5. Re-uploaded all the 3mf and STL files.

Useful Prints

print