Truthless

LinkDesigns

This is a stackable shelf system designed to be easily printable, robust, and filament efficient. Stack your shelves vertically or horizontally and free up space on your desk! The design prints without support and is easily assembled with no glue or screws. There are two trays available: A standard tray for the “floor” of each shelf, and a top tray that blends nicely onto the uppermost shelf for a better look. I am looking forward to modifying and adding on to this design to make it as useful as possible, so if you have any feedback let me know!<figure class="image image_resized" style="width:61.06%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000426986/design/2024-04-13_5504ad36c316c.gif"></figure>&nbsp;Update V1.1 - 4/19/24<ul><li>Wall mounting holes added to shelf for more placement options</li><li>Tray walls thickened to improve durability</li><li>Small adhesion / anti-warping changes made to shelf </li></ul>Thank you all for the feedback and suggestions!

Stackable Shelf Organizer

organization

3rdCoastPrinting

Designed Z series rear lens caps with Nikon Z logo and the focal length. Decided to do the same thing for f mount lenses. I only have the 200-500 lens so that&#39;s the only one printed and took pictures of. All should print the same, minus the focal length text being different. If you print other focal lengths, please share you pictures.&nbsp;Current print profile includes a separate plate for the below focal lengths. The plates are named by the focal length, so you can delete the plates you don&#39;t need. To move caps to all one plate please select the cap and the text when moving as they are separate components. Initial print layer is 0.2mm for finer detail on the text.&nbsp;If you have a focal length that&#39;s missing and want it added, respond in the comments or message me.&nbsp;<ul><li>24</li><li>50</li><li>85</li><li>105</li><li>14-24</li><li>24-70</li><li>18-55</li><li>18-200</li><li>70-200</li><li>200-500</li><li>200-400</li><li>70-300</li></ul>Z Series lens caps can be found here: <a target="_blank" href="https://makerworld.com/en/models/206963#profileId-227069" rel="nofollow noopener">https://makerworld.com/en/models/206963#profileId-227069</a>

Nikon f Mount Rear Lens Caps

stuff

ChappIO

A card-sized container for Magic: The Gathering counters. I designed this to be roughly the same size as a sleeved card so it fits inside most deckboxes. This way you can always bring the counters you need for your deck.&nbsp;I&#39;ve tested it in every deckbox I own, including <a target="_blank" href="https://makerworld.com/en/models/133536" rel="nofollow noopener">MTG Commander / EDH Deckbox</a>.&nbsp;<blockquote>UPDATE!Thanks to the release of the customizer on Makerworld, you can now create your own counter using the “Customize” button.</blockquote>&nbsp;No Additional Parts&nbsp;This model is fully printed, no parts required.&nbsp;Snap Lid&nbsp;I&#39;ve designed the lid to snap shut to make sure it doesn&#39;t open when you take it out of your deckbox.&nbsp;Including Counters&nbsp;Print profile contains a set of counters, place a comment to request more. The container also fits <a target="_blank" href="https://www.citadel.black/shop/p/buffcounters" rel="nofollow noopener">Citadel Black&#39;s Metal Buff Counters</a>.&nbsp;I added the following counters:&nbsp;<ul><li>+1 / +1</li><li>+1 / -1</li><li>-1 / +1</li><li>-1 / -1</li><li>+1 / +0</li><li>+0 / +1</li><li>-1 / -1</li><li>-0 / -1</li><li>+2 / +2</li><li>+3 / +3</li><li>+4 / +4</li><li>+5 / +5</li><li>+10 / +10</li><li>a blank counter</li><li>bounty</li><li>brick</li><li>charge</li><li>coin</li><li>copy</li><li>death (deathtouch)</li><li>demon</li><li>double (double strike)</li><li>fate</li><li>first strk (first strike)</li><li>flying</li><li>haste</li><li>hexprf (hexproof)</li><li>hit</li><li>hour</li><li>indest (indestructable)</li><li>lifelink</li><li>menace</li><li>poison</li><li>quest</li><li>reach</li><li>shield</li><li>trample</li><li>vigilanc (vigilance)</li></ul>&nbsp;

MTG Counters in Card Container - Fits Deckbox

mtg stuff

DesignCraft

DISCLAIMERS: <ul><li>Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.</li><li>This model may not fit all ELEGOO cardboard spools. Please review the photos and spool measurements before printing.</li></ul>Description:&nbsp;This adapter system wraps the edges of an ELEGOO 1kg 199x64mm cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Features:<ul><li>Reusable</li><li>ELEGOO nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Measure your spool first to ensure it matches the specified dimensions</li><li>Print this model twice for a single spool</li><li>Affix one spool ring adapter on each side of the ELEGOO spool</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

organization

stuff

mtg stuff

x1 upgrades