Trooper131

TotalChaos

<p style="text-align:center;">Tidy System Colour Fat Max Draw For the A1,X1C,P1P & P1S Tidy System<br><br>Included is the first draw option for the Fat Max body.<br>This draw consists of 12 slots for the standard parts box's for hotends, nozzle wipes, silcone socks etc.</p><p style="text-align:center;"> </p><p style="text-align:center;">There will be more options to come!<br>Create your own storage solution with the Tidy System!<br><br><span style="color:hsl(120,75%,60%);"><strong>NEW DRAWS ADDED!</strong></span><br><span style="color:hsl(120,75%,60%);"><strong>Fat Max Draw Split Style 1 & 2</strong></span><br><a target="_blank" href="https://makerworld.com/en/models/101894#profileId-108493" rel="nofollow noopener">https://makerworld.com/en/models/101894#profileId-108493</a><br><a target="_blank" href="https://makerworld.com/en/models/101902#profileId-108499" rel="nofollow noopener">https://makerworld.com/en/models/101902#profileId-108499</a><br><br><br>The Tidy System can be found using the following link: <a target="_blank" href="https://makerworld.com/en/models/71878#profileId-76150" rel="nofollow noopener">https://makerworld.com/en/models/71878#profileId-76150</a></p>

Tidy System Fat Max Body + Boxed Spares Draw

Bambu tidy box

Adamko

<p>Wiper bin for FOSBOS storage system. You can also store screws that came with your wiper in this bin.</p><p>This bin is 1x1x4u.</p><p>&nbsp;</p><p>Original FOSBOS: <a target="_blank" href="https://makerworld.com/de/models/40503" rel="nofollow noopener">https://makerworld.com/de/models/40503</a></p>

FOSBOS - Wiper with screws bin

FOSBOS

DesignCraft

<p>Build small or large scale models with these easy-to-print building blocks!</p><p>&nbsp;</p><p><strong>Instructions</strong>:</p><ul><li>Print at 0.2mm with 0% infill.</li><li>Let your imagination run wild!</li></ul><p><strong>Tips</strong>:</p><ul><li>Tolerances will vary between blocks and connectors depending on the filament used. I suggest printing the connectors with a few different filaments and finding ones that work best with different blocks.</li><li>The connectors were designed with grooves so you can use your fingernail to insert and remove from blocks.</li><li>Keep needle nose pliers on hand for tighter tolerances.</li><li>Every block does not need to connect to every other block. Create strips of blocks and then connect to another strip with just a few well-placed connectors.</li><li>You can also stack sections without the need for connectors. The pictured tower has about eight stacked sections which are not otherwise connected.</li></ul><p><strong>Companion Collections</strong>:</p><p>&nbsp;</p><p>The following collections provide additional models within specific categories.</p><ul><li>Textured Slabs: <a target="_blank" href="https://makerworld.com/en/models/22333" rel="nofollow noopener">https://makerworld.com/en/models/22333</a></li><li>Windows &amp; Panes: <a target="_blank" href="https://makerworld.com/en/models/22331" rel="nofollow noopener">https://makerworld.com/en/models/22331</a></li><li>Doors: <a target="_blank" href="https://makerworld.com/en/models/22332" rel="nofollow noopener">https://makerworld.com/en/models/22332</a></li><li>Fences: <a target="_blank" href="https://makerworld.com/en/models/22330" rel="nofollow noopener">https://makerworld.com/en/models/22330</a></li></ul><p><strong>Notes</strong>:</p><ul><li><strong>DesignCraft</strong> is a placeholder name for this project. The name may change in the future!</li><li>The blocks used to make the pictured tower were all printed with PLA filaments.</li><li>No glue, adhesives, or anything like that were used to create the pictured tower!</li></ul><p><strong>Credits</strong>:</p><ul><li>The build pictured was inspired by ItsMarloe&#39;s Amethyst Tower. However, I did take many of my own creative liberties! You can find his video here: <a target="_blank" href="https://www.youtube.com/watch?v=QI8hSyTASEc" rel="nofollow noopener">https://www.youtube.com/watch?v=QI8hSyTASEc</a></li><li>The Minecraft Spider model which appears in a couple of the images is by Steven786: <a target="_blank" href="https://www.printables.com/model/148963" rel="nofollow noopener">https://www.printables.com/model/148963</a></li><li>The stackable sorting trays I used to keep my blocks organized are by Mar Ber: <a target="_blank" href="https://www.printables.com/model/498070" rel="nofollow noopener">https://www.printables.com/model/498070</a></li><li>The organic catchall tray I used to hold my connectors is by lord_edel: <a target="_blank" href="https://www.printables.com/model/380742" rel="nofollow noopener">https://www.printables.com/model/380742</a></li></ul>

DesignCraft Building Blocks inspired by Minecraft

Sonstiges

Ken Mills

<p>2D art display for an Super Nintendo controller patent drawing.</p><p>&nbsp;</p><p>Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well).</p><p>&nbsp;</p><p>The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture in.</p><p>&nbsp;</p><p><strong>Important:</strong></p><ul><li>Be sure to allow the print to fully cool before removing from the build plate to avoid warping it while still warm.</li><li>If you are having trouble printing thin lines or the slicer preview, make sure the Arachne wall generator is enabled.</li></ul><p>Before printing the included frame, check out my new lightbox option: <a target="_blank" href="https://makerworld.com/en/models/145904" rel="nofollow noopener">https://makerworld.com/en/models/145904</a></p><p>&nbsp;</p><p><a target="_blank" href="https://makerworld.com/en/models/145904" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/457768/2024-01-27_34196d0c3075.jpg"></a></p><p>&nbsp;</p><p>Check out my other patent art here: <a target="_blank" href="https://makerworld.com/en/u/3703368285/collections/18978" rel="nofollow noopener">https://makerworld.com/en/u/3703368285/collections/18978</a></p><p>&nbsp;</p><p><a target="_blank" href="https://makerworld.com/en/u/3703368285/collections/18978" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/457768/2024-01-27_1295b19d277ea.webp"></a></p>

SNES Controller Patent Art

Patent Art

Adam L

<p><i>Change log:</i></p><ul><li><i>Added a PA-tuned profile for <strong>Bambu's PETG-CF</strong> (4/19/23). I usually use the Bambu presets.. but I was/am struggling with this filament.  I do not recommend it. </i></li><li><i>Added <strong>Overture Army Green PETG</strong> (4/20/23)</i></li><li><i>Added <strong>California Filaments Matte Black PETG</strong> (5/2/23)</i></li><li><i>Added <strong>California Filaments Golden Yellow PETG</strong> (5/2/23)</i></li><li><i>Added <strong>California Filaments Glow (clear) PETG</strong> (5/2/23)</i></li><li><i>Added <strong>Prusament Matte Black PETG</strong> (5/6/23)</i></li><li><i>Retuned <strong>Prusament Galaxy Black PETG</strong> (5/19/23) - *updated settings.</i></li><li><i>Retuned<strong> California Filaments Teal, Fluorescent Orange, & Cloudy White</strong> colors (5/28/23) - *updated PA Values, improves edge cases & wall strength.</i></li><li><i>Added <strong>Prusament Ocean Blue  PETG</strong> (5/29/23)</i></li><li><i>Added <strong>Prusament Carmine Red  PETG</strong> (6/4/23)</i></li><li><i>Updated/Retuned <strong>Prusament Matte Black PETG</strong> & <strong>California Filaments Clear PETG </strong>(6/5/23)</i></li><li><i>Updated/Retuned  <strong>California Filaments Yellow PETG </strong>(6/11/23)</i></li><li><i>Updated/Retuned  A<strong>MOLEN Rainbow PETG </strong>(7/1/23)</i></li><li><i>Added <strong>Prusament Chalky Blue PETG</strong> (7/19/23)</i></li><li><i>Fixed a mistake in <strong>Prusament Carmine Red PETG </strong>min layer time (7/20/23)</i></li><li><i>Added <strong>Prusament Yellow Gold PETG</strong> (7/20/23) - this filament tunes fine, but man is it an ugly color. Do not recommend unless you want the color of bile.  They should've called this “diseased yellow”.</i></li><li><i>Added <strong>Prusament Transparent Orange PETG</strong> (7/28/23) </i></li></ul><h4> </h4><h4>What this is:</h4><p>This is a collection of all of my PETG filament profiles for all filaments I've used of this type.  I happen to have a decent amount of <a href="http://referrals.californiafilament.com/rV8091rv?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxNTg0NzYyODA5fQ%3D%3D" rel="nofollow">California Filaments</a> because I've found that brand works well with this printer, and you can push the flow rates higher with it than some others. </p><p> I will update it as I tune new filament brands and colors.  They are generally tuned for <strong>flow rate</strong>, <strong>pressure advance</strong>, and <strong>temperature </strong>and <strong>volumetric flow limits </strong>and <strong>overrides</strong>.  They're a good working starting point for anyone struggling with a filament. <strong> </strong>I've also tuned other types of filaments (see <a href="https://www.printables.com/@AdamL/models" rel="nofollow">my models here</a>) and you should find, by category:</p><ul><li><a href="https://www.printables.com/model/457260-tpuflexible-tuned-x1c-print-profiles-for-bambuorca" rel="nofollow">TPU / Flexibles</a></li><li><a href="https://www.printables.com/model/457284-panylon-tuned-x1c-print-profiles-for-bambuorca-sli" rel="nofollow">Nylon/PA and PACF variants</a></li><li><a href="https://www.printables.com/model/457321-pc-tuned-x1c-print-profiles-for-bambuorca-slicer" rel="nofollow">Polycarbonate  & Polycarbonate-CF</a></li><li><a href="https://www.printables.com/model/457248-pla-tuned-x1c-print-profiles-for-bambuorca-slicer" rel="nofollow">PLA / PLA + / Silk PLA</a></li><li><a href="https://www.printables.com/model/457271-absasa-tuned-x1c-print-profiles-for-bambuorca-slic" rel="nofollow">ABS / ASA</a></li></ul><p><strong>CHT-Nozzle versions also available</strong> (0.4 mm , Brass)</p><ul><li><a href="https://www.printables.com/model/539704-chtnozzlepetg-tuned-x1c-print-profiles-for-bambuor" rel="nofollow">PETG</a></li><li><a href="https://www.printables.com/model/540552-chtnozzlepla-tuned-x1c-print-profiles-for-bambuorc" rel="nofollow">PLA</a></li><li><a href="https://www.printables.com/model/542033-chtnozzletpu-tuned-x1c-print-profiles-for-bambuorc" rel="nofollow">TPU</a></li><li><a href="https://www.printables.com/model/542058-chtnozzle-asaabs-tuned-x1c-print-profiles-for-bamb" rel="nofollow">ABS/ASA</a></li></ul><h4> </h4><h4>How to use:</h4><p> These 3MF files are designed for use in Orcaslicer/Bambuslicer, but will work best in Orcaslicer, because it supports using a fixed pressure-advance value in the slicer.  </p><ul><li>Load the 3MF file for the filament of your choosing.  Files are named as <<strong>Brand>__.3mf</strong>.</li><li>(optional, recommended): Save the filament and/or print presets for your own use to your user presets for future use.</li><li>Remove the calibration cube dummy object and put your desired object in.</li><li><strong>Print!  But, turn off flow calibration option in your prints!</strong>  The more reliable PA value stored in the filament profile will be used instead, and you can skip the wasted startup time, too!<ul><li><img src="https://media.printables.com/media/prints/455802/rich_content/dcbf8f87-13d5-4362-a0f5-c9b1a895b70a/image.png#%7B%22uuid%22%3A%22ff02b71c-6cd6-4ebc-b38a-446080d43e9e%22%2C%22w%22%3A440%2C%22h%22%3A110%7D"> </li></ul></li><li>If you want to use these in Bambu slicer, you won't get the PA values applied automatically sadly, and you'll have to do that with a <a href="https://forum.bambulab.com/t/flow-calibration/892/15" rel="nofollow">manual GCODE in the filament's start GCODE</a>.  This is really annoying to do for each filament, but it does work.  However  I suggest you try Orcaslicer for this reason.</li></ul><p>&nbsp;</p><h4>Important notes:</h4><ul><li>These profiles are tuned on an X1C, with a hardened steel 0.4 nozzle installed, for use with a range of layer heights.  <strong>If you have a different nozzle size or nozzle kind (steel/brass), these will be only starting points</strong> <strong>and you should re-tune</strong> most of the variables except maybe temperature.</li><li>Each 3MF also contains some of my own optimized settings for 0.16 mm prints, which I typically use, but these tuned filament profiles are designed/tuned to work across a variety of different print profiles.</li></ul><h4>Background:</h4><p>I use the <a href="https://github.com/SoftFever/OrcaSlicer" rel="nofollow">Orca Slicer </a>variant of Bambu's slicer because it offers finer-grained control over the slicing process and makes tuning and using tuned filament profiles much easier than Bambu's official slicer, which lacks good calibration routines for some of the most important variables in good printing: <strong>flow rate</strong>, <strong>pressure advance</strong>, and <strong>temperature </strong>and <strong>volumetric flow limits.</strong>  </p><p>This is particularly true for Bambu's Pressure Advance (<a href="https://github.com/bambulab/BambuStudio/issues/348" rel="nofollow">they incorrectly call this “flow”</a>) calibration, which forces you to run it every time and is unreliable, particularly on the popular textured PEI surface.</p><p>Each of these profiles has been tuned for:</p><p>&nbsp;</p><ul><li><strong>Flow rate </strong> (aka extrusion multiplier)</li><li><strong>Pressure advance </strong>(aka linear advance)</li><li><strong>Temperature </strong>(with temp towers)</li><li><strong>Volumetric flow limits </strong>(my settings are a little conservative based on printing the max volumetric flow rate calibration inside Orcaslicer)</li><li><strong>Overrides</strong> (I typically try to avoid using these unless I have to)</li></ul><p>&nbsp;</p><p><i>Disclaimer:  These are free to use, and I do not own the OrcaSlicer calibration cube model, i'm just using it here as a convenient way to distribute the profiles.</i></p><p><i>Disclaimer: The CA filaments link in the description here is a 25% off-first-order coupon link, but I'm not affiliated with CA filaments in any way, and they did not ask me to make this post.</i></p>

- PETG - Tuned X1C Print Profiles for Bambu/Orca-Slicer

Print Profiles

blecheimer

<p>This is a spoon that allows fast and precise spooning. You can easily fill your smallest and largest desiccant containers without spilling the tiny pearls - say goodbye to funnels.<br>The unscaled spoon can hold ~12ml that is 10g of silica-gel pearls.</p><p>&nbsp;</p><p>Update:<br>Based on a comment of user fish_ I made a stand for this spoon:<br><a target="_blank" href="https://makerworld.com/de/models/28648#profileId-25036" rel="nofollow noopener">https://makerworld.com/de/models/28648#profileId-25036</a></p><p>&nbsp;</p><p><span style="font-size:14px;">Disclaimer:</span><br><span style="font-size:14px;">This work by blecheimer is licensed under </span><a target="_blank" href="http://creativecommons.org/licenses/by-nc-sa/4.0/?ref=chooser-v1" rel="nofollow noopener"><span style="font-size:14px;">CC BY-NC-SA 4.0</span></a><br><span style="font-size:14px;">You are not allowed to copy this model to other 3D printing websites without my permission.</span></p>

Spoon for Fast & Precise Spooning

Nützliches

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3><span style="color: hsl(0,0%,100%)">Introduction</span></h3></td></tr><tr><td><p>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed:<br>So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..</p><p>That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.</p><p>As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.</p><p>&nbsp;</p><p>Thanks,<br><strong>Ben Levi</strong></p><p><a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)</p><p>&nbsp;</p></td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2><p>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).</p><ul><li>Easy installation</li><li>Dual LED strip<br>installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td><p>&nbsp;</p><figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2><p>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:</p><figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><p style="text-align: center"><strong>Printing Time</strong></p></td><td>70~85 print hours - including color switching!</td></tr><tr><td><p style="text-align: center"><strong>Printer</strong></p></td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td><p style="text-align: center"><strong>Filament</strong></p></td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul><p>* Feel free to choose your own colors.</p></td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure><p>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. <strong>Click on the pictures to enlarge.</strong></p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p>&nbsp;</p><h2>Printing settings</h2><p>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.</p><p>Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results <strong>(click to enlarge):</strong></p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure><p>Please note that you will find in also wonderful print profiles from the community too :)</p><h2> </h2><h2>Assembly instructions</h2><p>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:</p><h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3><p>Please print x2 Button insert.stl files and assemble as the photo below:</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg"></p><p>&nbsp;</p><h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project.<br>please make sure to choose: “white” and “Strip-USB Button” options.<br> </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files:<br><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2><span style="color: hsl(0,0%,100%)">Changelog</span></h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items<br> </li></ul></td></tr></tbody></table></figure>

BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

Bambu

Jorge Rui

<h3>Introduction</h3><p>This organizer is composed of two large blocks that are connected in a seamless way.</p><ul><li>The different modules can be used however you want. With several recesses, it allows you to store small things without them falling and be quickly accessed.</li><li>I added an Apple phone charger, but it can easily be adapter for other models. the module above it, are for USB-A & C cables and pens.</li><li>Other modules are movable to facilitate their cleaning, namely those where I place the pencils. And the 3 front left pockets, I've made them for post-its </li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3059492201/draft/2023-08-23_f8gmtah4w4oa.jpg"></figure><p>The assembly is very simple, just fit the two bases that will be connected with the notches.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3059492201/draft/2023-08-23_f0qc2k2xarnr.jpg"></figure><h3>Print instructions.</h3><p>And again, the design is simples, and the printing is simple. the lids will need supports on the external contour lip. </p><h3>Notes:</h3><p>I'm printing it at this exact moment. The parts at the momento ar all excelent  (they are NOT complicated, so I don't expect any print problems)</p><h4><strong>Support the designer:</strong></h4><p>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a href="https://www.buymeacoffee.com/designrepcom" rel="nofollow"><strong>buymeacoffee</strong>  </a>or <a href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow"><strong>paypal, </strong></a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.</p>

Office desktop module

Organizer

printchallenge

<p>I modelled and printed some pikmin characters and used them to show the difference between resin, FDM and multi material printing.</p><p>For more info on how I printed them you can watch this video:</p><p>&nbsp;</p><figure class="media"><div data-oembed-url="https://youtu.be/RSrX33Ppvew"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/RSrX33Ppvew" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><p>&nbsp;</p>

3 Pikmin Characters!

Figuren

Amao Chan

<div><h1>Summary</h1><div><p>Pangolins now are facing critical crisis as they are closing to extinct. In fact, humans are the murderers of this disaster, superstition and greed are the main reason to cause this massacre.<br>Pangolins, the mammals covered in tough and overlapping scales, are actually far from aggressive. Their scales provide good defense against predators in wild. However, they’re considered the world’s most hunted animal because people believe that the meat is prized for medicinal ingredient and the scales help curl impotence.<br>Nowadays, the numbers of pangolins are less and less, some people eat them only for the reason of showing their ostentatious wealth, what they do to these helpless animals is to make them approach to endangered. Although International trade in pangolins has been banned by CITES since 2000; and are listed them as 'protected species' in most Asian home states, scaly anteaters are still threaten with smuggling and poaching. Pangolins’ disappear would not be the result we expect to see, only when strictly implement of law enforcement on punishing these poachers and pangolin-eaters would effectively bring down the crisis of extinction. This is our latest chance to save pangolins, and please never make science predictions come true.   </p><p>Pangolin is a really skillful and difficult work that I have spent a lot of time on it. It has been passed at least six editions before presenting to all of you. What I was trying to challenge is an artwork with both perfect appearance and function. It was a little struggle for me to share this work at the beginning since I’ve fallen in love with it when it’s first done and stood in front of me. At this moment, what I am wondering more is to let you firsthand it, holding and feeling the variation with actions. Enjoy and I believe you’ll like it.  </p><p>Same file will be uploaded to <a href="http://fastlab.tw/" rel="nofollow">http://fastlab.tw/</a>, (Institute for Information Industry, III), which is a 3D works sharing website, welcome all 3D players upload your works and have fun here! </p><p>Special thanks to Shinkong Synthetic Fibers Corp. for providing dedicated color materials (ABS) and supporting on this creation.</p><p>Design Software - SketchUp<br>my settings<br>ABS<br>z resolution 0.2mm<br>scale 100%<br>Don't printing all models are small then 75% of original model size,<br>and set up 0.15mm layer resolution.</p><p><a href="https://amaochan.work/" rel="nofollow">https://amaochan.work/</a><br><a href="https://www.facebook.com/paperworkers" rel="nofollow">https://www.facebook.com/paperworkers</a><br><a href="https://www.youtube.com/watch?v=fkWxOLbFxPI" rel="nofollow">https://www.youtube.com/watch?v=fkWxOLbFxPI</a></p><hr><p>穿山甲正面臨迫切的危機，牠們走在快速滅絕道路上，人類是這場災難的兇手，迷信與貪婪是屠殺的原因。</p><p>穿山甲這個性情溫和的動物，全身佈滿鱗片，這些鱗片在野外對於保護自己有些幫助，但是身上的鱗片也是牠們被獵殺的因素。因迷信穿山甲的鱗片有醫療與壯陽的效用，導致穿山甲這無辜的動物被瘋狂獵殺。也因為野外的穿山甲越來越少，所以穿山甲成了昂貴的食物，有些人僅僅是為了炫富而食用穿山甲，這樣的行為也把穿山甲推上最後的滅絕之路。雖然現在穿山甲在多個國家及地區均禁止出口及貿易，但是走私與盜獵依然存在！落實執法，逮捕並懲處這些盜獵者及食用者才能真正解決穿山甲的危機。科學家認為亞洲的穿山甲可能將於20年內滅絕！這不是我們想要的結果，現在就是解救穿山甲的最後機會。請別讓科學家的預言成真。</p><p>這個作品我花了很多的時間，是一個難度很高的作品，自開始到完成創作至少修改了6個版本，不停地推翻與重建，因為我在挑戰一個美與機能都要兼具的作品。所以當我完成這個作品時，也同時愛上這個作品，因此有些捨不得分享出來。但我更期望朋友們也能夠親自體驗我的感受，能將牠握在手中，感覺牠的觸感、聲音與各種動態的變化。當你下載了並列印這作品時，願你也能像我一樣愛上這個作品。</p><p>同樣的檔案我也分享於 <a href="http://fastlab.tw/" rel="nofollow">http://fastlab.tw/</a> 這是台灣資訊策進會的3D分享網頁，希望各位3D玩家也能慢慢豐富這個地方。</p><p>感謝  新光合成纖維股份公司  訂製專用顏色之3D列印材料贊助本作品創作。</p><p>列印建議<br>層高0.2mm<br>免支撐<br>縮小列印時請別小於0.75並提提高解析度到0.15mm</p></div><h1>Custom Section</h1><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=fkWxOLbFxPI"><p class="detail-video"><iframe src="//www.youtube.com/embed/fkWxOLbFxPI" frameborder="0" allowfullscreen="allowfullscreen"></iframe></p></div></div>

Save pangolins

Flexi

Sevro

<p>Crayon hedgehog.</p><p>Put the crayons in the holes and make the hedgehog spines.</p><p>Original size of the hedgehog is for thick crayons, if you have standard thin ones you can scale down the model about 20-30%</p>

Crayon hedgehog

Deko

Chris Pirillo

<p>TK-B00, a once-dutiful stormtrooper in the Galactic Empire's ranks, had always been more than just a number. Deep beneath the cold, white armor, a flicker of individuality and conscience burned within. This spark of humanity grew more pronounced as he questioned the morality of his actions while enforcing the Empire's oppressive rule.</p><p>&nbsp;</p><p>TK-B00's moment of reckoning came during a pivotal mission on the forest moon of Endor. Amidst the chaos of the Battle of Endor, witnessing the destruction of the second Death Star and the Ewok rebellion, he found himself at a crossroads. He chose to defy orders, refusing to fire upon the Rebel Alliance. His rebellion was met with severe consequences - he was gravely injured and left behind by his comrades.</p><p>&nbsp;</p><p>In his moment of vulnerability, TK-B00's thoughts turned to the countless lives he had taken and the lives he had saved by turning away from the Empire's dark path. With his last breath, he whispered a plea for redemption, hoping for a chance to make amends. In that moment, the Force responded, granting him a chance to find redemption in the afterlife.</p><p>&nbsp;</p><p>TK-B00 became a wandering spirit, a guardian of the light, unburdened by the confines of his stormtrooper armor. No longer bound by the rigid conformity of the Empire, he dedicated himself to helping those in need, standing up against oppression and tyranny across the galaxy. His transformation from a faceless stormtrooper to a spectral protector, known by his comrades as the Ghost of Endor, served as a beacon of hope - proof that even those once lost to the darkness could find their way to redemption and purpose.</p><p>&nbsp;</p><p>Larger model sliced at .20mm layer height in the Bambu Studio:</p><ul><li>Black to Layer 4</li><li>Grey to Layer 7</li><li>White to Top Layer</li></ul>