Touka

Cesar Pacheco

Apple Logo ban holder with stl to add extra holes for your watch bans

Apple Ban Holder 

给文文的

补补觉去

对原作进行了加长，同时对一些细节进行了修改更便于无支撑打印，不需要金属件。如有需要可以底板涂点胶水。&nbsp;The original work has been lengthened, and some details have been modified to make it easier to print without support.No metal parts required.If necessary, apply some glue to the plate.&nbsp;&nbsp;2024/3/19:增加了一款刀片，根据微技术Microtech刀型制作。可以直接替换原刀片。刀尖尖锐，请注意安全。A blade has been added, made according to Microtech knife type. Can directly replace the original blade.The tip of the knife is sharp, please pay attention to safety.&nbsp;2024/3/31:很多人想要短款的。我重新上传了75cm的版本。Many people want short styles. I re-uploaded the 75cm version.&nbsp;2024/4/7:我制作了一个梳子版本。I made a comb version.&nbsp;重新制作了带系绳孔的刀柄，并修复了非流形错误。Reworked the hilt with lanyard holes and fixed non-manifold bugs.&nbsp;加大了一点刀钮尺寸，放在源文件里的pin set V2.stl，如果还是太松可以用点胶水。Increase the size of pin set and put it in the ‘pin set V2.stl’ in the source file. If it is still too loose, you can use some glue.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/825887/2024-03-20_cc777c7f008d7.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/825887/2024-04-07_83168edc957f7.jpg"></figure>

Longer Tiktok Gravity knife( Various styles )长款萝卜刀

玩具

maCyo42

<figure class="table"><table><tbody><tr><td>New Stand with place for “BOBOVR Twin Charger Station/Dock for B2 Battery Pack” in the Base of the Stand <a target="_blank" href="https://makerworld.com/de/models/75980#profileId-80585" rel="nofollow noopener">RELEASED - Get it here</a></td><td><figure class="image image_resized" style="width:38.7%;"><img src="https://makerworld.bblmw.com/makerworld/draft/215161/2023-11-26_ed931c1cfba14.png"></figure></td></tr><tr><td>Sneak peek of the Light Base to lighten up your new Toy. Release soon</td><td><figure class="image image_resized" style="width:30.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/215161/2023-11-28_74a6572aa6c72.png"></figure><figure class="image image_resized" style="width:29.03%;"><img src="https://makerworld.bblmw.com/makerworld/draft/215161/2023-11-28_4a5530ec65884.png"></figure></td></tr></tbody></table></figure>&nbsp;This is my Remix and Optimizations of a Quest 3 Stand´n´Wall Mount.&nbsp;Stay tuned more to come&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/215161/2023-11-13_478ee531fa295.png"></figure>&nbsp;<figure class="table" style="width:98.41%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:87.74%;"><img src="https://makerworld.bblmw.com/makerworld/draft/215161/2023-11-13_1b26bcaf31657.jpg"></figure></td><td>Mount for Wall or Stand. Hold the Quest 3 and both Controller</td><td>Released 20231113</td></tr><tr><td><figure class="image image_resized" style="width:86.57%;"><img src="https://makerworld.bblmw.com/makerworld/draft/215161/2023-11-13_84f7d5ed338dd.jpg"></figure></td><td>"Stand" for Mount optional fits the Quest 3 Plug (EU tested) and 2 Mignon Batteries in the Stand</td><td>Released 20231113</td></tr><tr><td><figure class="image image_resized" style="width:84.91%;"><img src="https://makerworld.bblmw.com/makerworld/draft/215161/2023-11-13_472170b79312.jpg"></figure></td><td>Nametags / Logotags you can add your own design to this plate. Later you find a blank Step File to modify the plate on your own! Special Limited Offer For the first 10 requests i create a personalized name-/logotag stl. (Logo only if you send me in svg) <a href="mailto:maCyo42@quantentunnel.de" rel="nofollow">maCyo42@quantentunnel.de</a> <img src="https://makerworld.bblmw.com/makerworld/draft/215161/2023-11-13_8909e18383425.jpg"></td><td>Released stl with Meta Logo and Step for own creations</td></tr><tr><td>Backplate to hold the Cable in place</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/215161/2023-11-28_0ce27414f2a7c.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/215161/2023-11-28_191c9b99d0ff9.png"></figure></td><td>Released 20231128</td></tr><tr><td>tba</td><td> </td><td> </td></tr><tr><td>…</td><td> </td><td> </td></tr></tbody></table></figure>

Quest 3 Stand´n´Wall Mount by maCyo42

有用的工具

michelem

<figure class="image"></figure>I present to you my Perpetual Magnetic Calendar, perfect for adding a touch of design to your home or office.&nbsp;The calendar consists of a wheel that houses the months of the year and the days of the week, supported by a pedestal.The transverse axis has the days of the month imprinted on it, while three markers complete the calendar to always identify the exact day!&nbsp;The marker for the days of the month should be moved every day by sliding it to the corresponding number.&nbsp;The other two markers are magnetic, ensuring a WOW effect for those who consult it. In particular, the magnetic marker for the days of the week may seem ordinary, but the one for the month of the year will surprise you by remaining suspended in mid-air!&nbsp;<figure class="media"></figure>&nbsp;Printing:&nbsp;It is recommended to use preset profiles, making sure to use high resolution for the parts with texts.&nbsp;The pieces are not huge, so you can use a resolution of 0.16mm (0.12 even better) for the whole wheel and the axis where the text is located.You can also use adaptive resolution and set a high one only for the top part where the text is, it&#39;s up to you.&nbsp;Colored text&nbsp;You need to change at least one color for the texts otherwise you won&#39;t see them. With AMS it&#39;s simple and you can use multiple colors to print the wheel texts. if you don&#39;t have an AMS, just add a pause when the texts starts and simply change the filament till the end of the print.&nbsp;Inserting Magnets:&nbsp;For the marker of the month and the days of the week, insert the magnet during printing with a bit of glue.&nbsp;<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000109567/design/2023-12-27_bec6b379194dd.jpeg"><figcaption>Month marker with magnet inserted during the pause. I know I have to clean my plate… :-)</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000109567/design/2023-12-27_237ec03a77104.jpeg"><figcaption>Weekdays marker with the magnet, remember to add a drop of glue and wait a minute, so it won&#39;t get attracted by the nozzle</figcaption></figure></td></tr></tbody></table></figure>&nbsp;Pay attention to the orientation of the magnets! The two markers must have the magnet&#39;s orientation opposite to the one you will insert in the holes, so they attract each other.&nbsp;Before you insert the magnet put a bit of glue and wait so the magnet won&#39;t get attracted by the nozzle when you restart the print.&nbsp;Month Marker: Printed with the sphere facing upward. At level 106, insert a pause to place the magnet. The magnet should be oriented with the TOP side opposite to the side of the magnets in the month holes.&nbsp;Days of the Week Marker: Printed with the base of the half-sphere on the plate. At level 20, insert a pause to place the magnet. The magnet should be oriented with the BOTTOM side opposite to the side of the magnets in the holes for the days of the week.&nbsp;By the way, presets profile has everything set up yet.&nbsp;For an extra smooth finish, I would recommend ironing all the top layers of the wheel.&nbsp;BOM and Assembly:<ul><li>21 magnets 5mm x 2mm (diameter x thickness) eg: https://t.ly/i8UwR</li><li>about 10 cm of sewing thread</li></ul>Assembly is simple and intuitive, making sure to respect the orientation of the magnets!The magnets must have the connecting side opposite to that of the respective marker to attract each other. Use a bit of glue for the magnets on the wheel.&nbsp;I would suggest to have the markers ready before you glue the rest of the magnets on the wheel so you can know the correct orientation using them.&nbsp;For the axis of the days of the month, glue may not be necessary, but it can be used to securely attach it to the wheel.&nbsp;Finally, the most challenging task: tying the sewing thread.&nbsp;This step can be a bit tricky as you need to determine the perfect length for all the months.Technically, this length is consistently about 82mm (from the axis hole to the wheel).Begin by tying one end of the thread to the month marker and inserting the other end into the small hole on the axis.Now, thread the other end into the hole on the back support without tying it and wrap the thread around the support twice to have it in pace but still adjustable.Verify that the length is correct by adjusting the marker into the month slots and pay careful attention to the thread length so that the magnets attract each other without touching.Once satisfied, secure the thread with a finger and apply a drop of glue to fix it in place.&nbsp;The WOW effect is guaranteed!&nbsp;A happy 2024 to all makers!&nbsp;UPDATE 03 Jan 2024:<ul><li>Added files and profile to use only 6x3mm magnets</li></ul>&nbsp;UPDATE 04 February 2024<ul><li>Added wheels in different languages (Italian, German, Spanish)</li></ul>&nbsp;

给文文的

玩具

有用的工具

DIY