Toejam

Just Jesse

Skadis based holder for the Mastercraft Utility knife and two spots for the extra blade tubes.

Skadis Mastercraft Utility Knife Holder

skadis

Justin Yu

This is a remix of the original HSW located here: <a target="_blank" href="https://makerworld.com/en/models/16011#profileId-15092" rel="nofollow noopener">https://makerworld.com/en/models/16011#profileId-15092</a>&nbsp;This includes all the parts needed to make a fully functional honeycomb storage wall&nbsp;I also included paint holders that should fit anywhere between 20mm bottles up to 35 mm bottles&nbsp;A fun yet functional print

Honeycomb Storage Wall The Complete Edition

to do

Love Prints

**Please Rate our Print Profile/Design When complete ****good or bad we like to know** *Shout out to the eagle eyed fan who noticed an eyebrow was missing! This has now been updated and rectified - 09/11/23* Merry GrinchmasLightboxFanart inspired We Recommend - UK COB LED strip: <a target="_blank" href="https://www.amazon.co.uk/dp/B09D7DH376?psc=1&ref=ppx_yo2ov_dt_b_product_details&_encoding=UTF8&tag=cariadprints-21&linkCode=ur2&linkId=e5f6db63799950a7b1ab1f32b3fa20c3&camp=1634&creative=6738" rel="nofollow noopener">COB LED's</a> All of our models are available in 3MF Format You can change the colour with easeYou can change the size with easeWe also include STL Files for those without a Bambu Labs Printer Additional Files included:White DiffuserHanging Rear Plate with CutoutRear PlateRear Plate with Cutout3.6mm Inserts Print Face Down on a Textured PEI Plate for best results Please check out our other designs<a target="_blank" href="https://makerworld.com/en/u/2913704375?orderBy=downloadCount" rel="nofollow noopener">https://makerworld.com/en/u/2913704375?orderBy=downloadCount</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/170281/2023-11-04_e091b82b867ac.png"></figure>

Merry Grinchmas Lightbox 

Lightbox

SPStudio

<h4>I update, revise and improve my design for my fixes very often. Please only use my Print Profile (Labelled as Designer or SPStudio) to ensure this fix is updated & work well. Profile with Non-Designer tags may be of poor functionality or non updated model.</h4>Click on Like if this model helped you in some way. It is very important and will help increase the exposure of this design to more people who might need it. Cheers!&nbsp;<blockquote>AnnouncementNew and Improved V2 Versions for the Ams Buffer Fix <a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">Before Buffer</a> and <a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">After Buffer</a> have just been released. Do check them out in my profile to see what are the improvement. Thank you for your continuous support.<figure class="image image_resized" style="width:33.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2023-12-21_db335e9276f41.jpg"></figure></blockquote><h4> </h4><h4>Here is behind the scene on how i make and test my fix, after i use this method then i proceed to laser alignment before finalizing the fix. So here is how accurate my fixes are. Even during moving. Cheers to actual precision…</h4><figure class="media"><div data-oembed-url="https://youtube.com/shorts/3yoLAQFka4g"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=3yoLAQFka4g"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/3yoLAQFka4g" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure><h2> </h2><h2>Introduction</h2>Failed to pull back filament error can be caused by multiple different variables & factors. This is a part of an series of Ams fixes that i have designed which can complement each other when used together. I do suggest you install all my fixes together for the 0ptimal effect to help your filament travel properly across the entire system which in turn can help improve, reduce or remove any potential Ams errors.&nbsp;I have grouped all fixes into their respective Collection for ease of searching what to install.&nbsp;V2 Collection are improvements done on the shortcoming of V1 Collection. Feel free to try V2 Collection and if it doesn't work properly then you can try the V1 Collection. You can easily find each of the Collection by clicking on the Collections tab on my profile.&nbsp;Unfortunately there isn't a single fix that can 100% work for everyone. What works for others, may not work for you but my fixes is definately a great place to start and have worked for majority of the users. My fixes are precisely measured then modelled. A Proper Fix would have the highest chance to reduce or solve the error.&nbsp;<figure class="image image_resized" style="width:81.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-09_cd9c426e40212.jpg"></figure><h2> </h2><h2>If you are too bored to read the entire lengthy write up explaining the need for this fix, here is the TL:DR.</h2>&nbsp;What is this? Ams Buffer Ptfe Right Guide Mount Fix will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder. Its design is accurately measured to let the Ptfe tube be as level as possible at the Ams buffer to allow the most smooth, least amount of friction and pressure for the optimal angle to go into the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.&nbsp;&nbsp;Who needs this fix? I believe that anyone with a Ams would benefit from this fix / enhancement regardless of do you have any problem or errors with the Ams / Printer. This will allow your Ptfe tube to be nearly 100% straight (laser and manually measured) when it enter or exit the Ams Buffer. In theory, there are only advantages and benefits after installing. There are literally no disadvantage to this fix.&nbsp;&nbsp;Have this fix been tested?This fix have been tested for on 1 X1C, 1 P1P and 2 P1S for 92000 retractions.&nbsp;&nbsp;Why use this fix?This is EZ to print but yet its very precisely measured and designed. I have taken measurements down to 0.10 degree (measuring the outgoing angle out of the buffer) despite stating this fix as nearly 100% straight because there could be as small as maybe below 1mm deviations with every single machine due mass production. &nbsp;The fix will hold the Ptfe Tube level with the Ams Buffer to allow the filament to pass through with a smooth movement with the least amount of friction. The accuracy is the main point in this fix.&nbsp;&nbsp;<h2>Important Notes:</h2>Note 1: This fix is designed to still allow you to able to use pretty much any avaliable Ptfe tube removal tool so you can still remove your Ptfe tube if you want to replace it or for whatever reasons. Note 2: Hydra or Non Modified Ams can all use and benefit from this fix.&nbsp;Note 3: <a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">If you are using a rear spool, please check out this version. https://makerworld.com/en/models/85989</a>&nbsp;&nbsp;&nbsp;<h2>What Mod / Fixes / Enhancement do i offer?</h2>Please don't download the wrong one. Only those in the photos below is designed by me who painstakingly took a lot of time to measure carefully and design just to get it working. #SupportOriginal Love you guys for all the support so far!&nbsp;- <a target="_blank" href="https://makerworld.com/en/models/47982" rel="nofollow noopener">Ams FIX Failed To Retract Filament Error (a preventive measure and solve the bay 2 and 3 error and prevent bay 1 and 4 to have any possibility of having an error due to tension and friction)</a> (Updated design on the 2nd photo below, try 1 then if it doesn't works properly for you then install the other one.)&nbsp;<figure class="image image_resized" style="width:74.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_2e40f9b49d622.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/56906" rel="nofollow noopener">(BRAND NEW) Ams Filament Pull Back Fix V2 Upgraded - Completely New Design Upgrade For Ams Filament Pull Back ERROR! Precisely Measured</a>&nbsp;<figure class="image image_resized" style="width:75.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_9c729f1a3501a.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/52782" rel="nofollow noopener">- Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:75.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_14c8811c47696.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">- V2 Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:76.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_6194006084695.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/53037" rel="nofollow noopener">- Ams Fix - Stack the Ams on tp (Using a carefully measured holder to hold the Ptfe in a curved angle that will allow filament to go through with the least possible amount of friction when the Ams is stacked on tp of the printer)</a>&nbsp;<figure class="image image_resized" style="width:77.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_e6ff2df6c7873.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/58543" rel="nofollow noopener">- Ams Buffer Ptfe Right Guide Mount Fix will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder.</a>&nbsp;<figure class="image image_resized" style="width:78.46%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_f95cf24ce5c9e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">- V2 Ams Buffer Right Ptfe Guide Mount - The Fix For Failed To Pull Back Filament a newly improved fix designed to replaced the V1 This will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder. EZ Installation. No screws needed!</a>&nbsp;<figure class="image image_resized" style="width:79.5%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_6ddf689393292.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/63021" rel="nofollow noopener">- Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:82.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_4c9e59fa5529e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/103987" rel="nofollow noopener">- V2 Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:81.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2024-01-10_69d2ccb8ac279.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/67779" rel="nofollow noopener">- The Smooth 4 Way Splitter. Look No Further. Combined with Ams Hub Lite together with this small attachment, you will have the Smooth 4 Way Splitter.</a>&nbsp;<figure class="image image_resized" style="width:83.64%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393317/2023-11-19_96f9eed020e9b.gif"></figure>&nbsp;<h2>Technical Write Up</h2>Friction - The cause of most of the Ams filament failed to retract problem. Bends or pressure on the shape of the Ptfe tube in turn creates a lot of friction, as the Printer and Ams is equipped with multiple sensors, these friction will cause filament not passing through the Ams to the printer smoothly and thus causing the Ams Failed To Retract Filament Error and similarly related errors.&nbsp;&nbsp;So what is the possible solution to the problem? Firstly we need to reduce friction for filament passing through Ptfe tubes? Simple! If we optimise the angle of the Ptfe it will allow the filament to enter and go through the Ams buffer with the least amount of friction and pressure.&nbsp;&nbsp;So what i have created to solve the problem? Using mutiple measuring tools and i have verified and manually to design a mount that will allow the Ptfe Tube to enter or exit the Ams Buffer HUB in a nearly 100% straight degree preventing the tube bending near the entry exit point of the Ams buffer. This will help and allow the filament to go from the Ams to the Ams Buffer Hub to the Printer smoothly and retract back with the least amount of pressure and friction. This fix can also solve wear issue on the internal of the Ptfe tube as less friction means less wear.&nbsp;&nbsp;What do i need in additional to installing this printed fix part? The screw that you need for this fix should be currently already on your printer just unscrew then install fix and then reinstall. Or you can try the screws from your Filament Holder.&nbsp;<h2>Additional Notes</h2>The error itself is complicated and non definitive. Whatever cause the error today might not be the same area that cause the error again, same with person A and Person B setup, as the error itself is mainly due to tension with friction triggering the sensors in the machine.&nbsp;I would suggest you download and try and install all my fixes together for the proper effect as together they will ensure a smooth delivery of the filament with much lesser friction (read write ups) and hopefully that will help and reduce or resolve the error. If you use only one or 2 of the fixes the error could still happen as there are still other area might still be causing excessive friction.

AMS Buffer PTFE Right Guide Mount Fix

Bambu lab

davglass

This is a remix of the T-Rex Skull from MakerBot Academy, it's just setup to print on 4 plates and setup for the Bambu printers.&nbsp;Note: It's set to print without supports or a brim. It has been noted on the A model or if you use faster speeds you may need to enable a brim to keep the model from falling over. I have printed several without supports or a brim.

skadis

to do

Lightbox

Bambu lab

To do kids