ToBo33

Fugge84

Here's a cute but damn big decorative bunny&nbsp;Total size 50 cm&nbsp;There are other sizes to follow, but they first have to withstand my pressure.25cm/78cm/18cm&nbsp;Have fun printing

Easter Bunny 50cm/ 19,685 inch / Oster Hase / Ostern

Things to Print

Rick269

A remix of Caleb Timoteo's excellent AT-AT pot plant. The main goal was to separate the parts so the base could be printed in white, with the AT-AT in grey.I ended up making a hoth planet base plate, which is recessed for the AT-AT to fit neatly into. I also moved the pot plant drain holes to the front of each 'pot’ to help them drain a bit easier. They drain through the baseplate. Some other minor tweaks to the AT-AT to help make it print easier.Hope you like it.

Remixed AT-AT Pot plant

Töpfe

Habitaritus

You don't know what to cook again? No problem! &nbsp;Now you can write your favorite dishes, ingredients or delivery services on the Meal Wheel. Turn the wheel, listen to it rattle and let the wheel decide! The wheel can be attached to any metal surface with magnets. There is currently no holder to place it on a normal surface. I will deliver it to you as soon as possible. You can print the wheel completely without support and according to your wishes. You can find a few examples in English in the .3mf file. If you don't immediately know how to assemble the wheel, take a look at the Assembly Guide (PDF). SidenoteIf you want to print the model on an A1 Mini, the wheel stopper may not fit 100%. Make sure that you scale all parts accordingly and not just the large parts. Unfortunately, I didn't have an A1 Mini at the time of the design and therefore only designed for the large print bed.

Meal Wheel - Let the wheel choose your meal

Essen

Kubikossi

<h2>New Universal Spool v2 released! <a target="_blank" href="https://makerworld.com/de/models/125311#profileId-135347" rel="nofollow noopener">Click here</a>!</h2>&nbsp;Universal spool for using filament on cardboard spools or Refill Packs (like eSun Refill Filament) in the Bambu AMS. No rewinding necessary, simply transfer the cardboard or refill core to the universal spools. Suitable for core diameters (inside) from 75 to 100mm. With Jayo spools, it is a little tricky to remove the rather thick ring at the core. You need a sharp cutter and patience.<a target="_blank" href="https://youtu.be/YNShKH9P1Qs?si=-JpmYJoZzH9Go-eM" rel="nofollow noopener">Check out my new video with a steb by step tutorial.</a><ol><li>Measure the width of the cardboard spool (inside between the reels). </li><li>Carefully remove one side of the cardboard spool. </li><li>Screw the corresponding core (50, 55 or 60mm width) onto a reel and insert it into the cardboard core.</li><li>Then turn over and remove 2nd side of cardboard reel.</li><li>If desired, then insert Silicatube (with silica gel or ballast).</li><li>Then screw on second roll, done.</li></ol>Now the filament can be used in the AMS without any problems. I made 2 designs of the reels, design nr. 2 needs less printing time. I use PLA (it is flexible enough for the core) with these settings: 3 walls 3 top and bottom layer 12% Gyroid Infill 0,16mm layerhigh (with variable layerhigh for the reels if you want)&nbsp;22.11.2023&nbsp;added the new v2 Cores (as Print Profile)<figure class="image image_resized image-style-side" style="width:37.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/797328/2023-11-22_2f2f7f0bccecd.jpg"></figure> The number of spiral arms was reduced from 4 to 3, while the diameter was increased from 110 to 117 mm. This means that the spools sit even better and less material is used, which also reduces the printing time slightly.&nbsp;The v2 Core with 60mm was tested by me with various filament and is therefore compatible with the following cardboard spools:<ul><li>Creality</li><li>eSun</li><li>GratKit</li><li>Kexcelled</li><li>Overture</li><li>Sunlu</li></ul><figure class="image image_resized image-style-side" style="width:37.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/797328/2023-11-22_61966bfd41a5d.jpg"></figure>&nbsp;Not yet tested, but should fit:<ul><li>Eryone</li><li>Bambu Lab Refill</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;17.10.2023 <ol><li><a target="_blank" href="https://makerworld.com/en/models/43852#profileId-45166" rel="nofollow noopener">new rewind core</a>. With this new core it is now possible to rewind filament with my universal spool, e.g. from a cardboard spool or a 3kg spool.</li></ol>&nbsp;02.10.2023<ol><li>added a &#34;Core Jayo 85-55&#34; especially for Jayo Spools. It&#39;s slightly smaller than the normal 100-55 Core.</li><li>reworked the silica-top, the thread now runs more easily.</li><li>updated the 3mf-File</li></ol>