TinkerShop

Kevin11

Made this golf ball marker for myself. outside surface looks the bad after taking off the supports, but it doesn't matter. Tape it to the golf ball and hit it real light with some spray paint. I used tree supports.

Golf Ball Marker - Dog

golf

PrintGeggo

The English translation is below.&nbsp;Dies ist ein Remix von dem bekannten Spiel Quoridor.&nbsp;Spieleranzahl: 2 – 4 Ziel: Mit seiner eigenen Figur die gegenüberliegende Seite des Spielbrettes als Erster zu erreichen Vorbereitung: Die 20 Wände werden gerecht zwischen den Spielern aufgeteilt.&nbsp;<ul><li>Das Spiel beginnt in der ersten Reihe in der Mitte (bei zwei Spielern ist es mit dem Plus gekennzeichnet.)</li><li>Der Spieler bewegt entweder seine Figur oder stellt eine Wand auf. Beides ist in einem Zug nicht möglich.</li><li>Auf der Plattform platzierte Wände müssen an 4 Felder angrenzen und können nicht mehr verschoben werden.</li><li>Es wird reihum gespielt, dabei darf die Figur (sofern der Weg nicht blockiert ist) in alle vier Himmelsrichtungen bewegt werden.</li><li>Wenn sich zwei Spielfiguren gegenüberstehen kann der Spieler, der am Zug ist, über die gegnerische Spielfigur springen. Wenn das Feld hinter der übersprungenen Figur durch eine Wand oder eine weitere Figur blockiert ist, darf ein freies Feld links oder rechts von der übersprungenen Figur gewählt werden.</li><li>Die Wände müssen so platziert werden, dass alle Spieler noch die Möglichkeit haben, ihre Zielseite zu erreichen.</li><li>Wenn der Spieler keine Wände mehr hat, muss er mit seiner Figur einen Zug machen. Deshalb sollten die Wände sinnvoll eingesetzt werden, weil sie gegen Ende des Spiels eine sehr entscheidende Rolle spielen können.</li><li>Der erste Spieler, der eines der 9 Felder in der letzten Reihe der Spielplattform erreicht, gewinnt das Spiel.</li></ul>Storage box for Quoridor von Crunchy<a target="_blank" href="https://makerworld.com/en/models/142419#profileId-155060" rel="nofollow noopener">https://makerworld.com/en/models/142419#profileId-155060</a>&nbsp;---------------------------------------&nbsp;Google translation:This is a remix of the famous game Quoridor.&nbsp;Number of players: 2 – 4 Goal: To be the first to reach the opposite side of the game board with your own figure Preparation: The 20 walls are divided equally between the players.&nbsp;<ul><li>The game begins in the front row in the middle (if there are two players, it is marked with a plus.)</li><li>The player either moves their figure or puts up a wall. Both are not possible in one go.</li><li>Walls placed on the platform must be adjacent to 4 spaces and can no longer be moved.</li><li>It is played in turns and the figure can be moved in all four directions (as long as the path is not blocked).</li><li>When two pieces face each other, the player whose turn it is can jump over the opposing piece. If the space behind the skipped piece is blocked by a wall or another piece, you may choose a free space to the left or right of the skipped piece.</li><li>The walls must be placed so that all players still have the opportunity to reach their target side.</li><li>When the player runs out of walls, he must make a move with his figure. That's why the walls should be used wisely because they can play a very crucial role towards the end of the game.</li><li>The first player to reach one of the 9 spaces in the last row of the playing platform wins the game.</li></ul>Storage box for Quoridor by Crunchy<a target="_blank" href="https://makerworld.com/en/models/142419#profileId-155060" rel="nofollow noopener">https://makerworld.com/en/models/142419#profileId-155060</a>

Quoridor (Maze Board Game)

games

Tactical Kaoz

Here is a cheap and affordable Nintendo Switch… Outlet Cover :)

Nintendo Switch Outlet Cover 

decor

Whimsii3D

Remixed part allows easy mounting directly to the wall. Added two countersunk holes to replace the Skadis mounting. No support, 15% grid infill, .3 layer height and 3 walls with a .6mm nozzle seems to be the best balance of speed, strength and quality.

Ryobi 18v Power Tool Wall Hanger Mount

tools

Williams Industries

Had a client want some Jeep themed keychains. There are 3 plates in total. One plate has all versions, the other 2 plates are the individual ones.&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>

Not Jeep Grill Keychain

jeep

SavagePat

Just another fridge magnet, this time it's a Pokeball. Magnetsize is 6x2mm, should be glued in.

Pokemon Pokeball Fridge Magnet

cool

KYZ Design

So I only have metal pegboards - some are metric (25 x 25 x 6mm) and some are imperial (25.4 x 25.4 x 6.35mm). The pegs I got from the hardware store were horrible - sometimes they didn't stay in when taking the tools out and wobbled around a lot - no fun to use.So I designed these to work with both metric and imperial pegboards. I went through at least 10 iterations to get to this, hope you enjoy, they will clip into place with a satisfying click.Sugest printing with PETG/ASA/ABS - at least 1mm of walls/top/bottom, 40% triangular infill.

Peg Hooks for Metal/Steel Pegboards - Metric and Imperial

random

ILImy2024

This requires multiple colors of filament, you can mix and match your own colors.Print Profile 1 : This requires 3 colors of filament.Print Profile 2 : This requires 2 colors of filament. Print Profile 3 : This requires 2 colors of filament. Applicable to A1 mini. Print Profile 4 : Ironing type:Topmost surface only, Top surface:60 mm/s. This requires 3 colors of filament. Use when higher quality is required.

Black Cat and White Cat Bookmark

cute

SavageLau

&nbsp;This simple tool is fast to print, and cost very little filaments, 0.80g each.This tool will help you clean and apply lube oil on the y , x, and z axis.&nbsp;y axis:<figure class="image image_resized" style="width:59.92%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368062/2023-12-10_d9887afdceb9d.jpg"></figure>X axis linear rail slots:<figure class="image image_resized" style="width:60.34%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368062/2023-12-10_aabf2a0a51199.jpg"></figure>Z axis linear rail slots:<figure class="image image_resized" style="width:60.28%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368062/2023-12-10_e3dd0712e2931.jpg"></figure>

A1 mini lube helper

printer tools

Wing-Art

The model has been enhanced by narrowing the opening of the clip and constructing a feeding aid. Furthermore, chamfers have been incorporated to optimize both its aesthetic appeal and functionality.

Gewürzclip - spice clip Remix

clips

tests

dongbuluo

Quality wall mount for headset.Designed with all rounded corners/curvatures that fit the headset perfectly.Screw hole: M6 screws

Quality wall mount for headset (clean design)

clips and hangers

dalet11

Simple hex display shelf.&nbsp;There are 2 models, one of the shelf and one blank hex to add spaces between shelves as needed.

Display Shelf Wall

shelves

The Crafty Maker

The buildable stag beetle is a fascinating miniature model comprising 31 pieces. Each piece fits together like a puzzle, allowing enthusiasts to create their own intricate replica of this remarkable insect. From the intricate mandibles to the detailed thorax, every piece is designed to capture the essence of the stag beetle's unique anatomy. Assembling this miniature marvel provides a fun and educational experience, offering insight into the insect's structure while fostering creativity.&nbsp;Whether it's a hands-on project for entomology enthusiasts or a captivating educational tool for young learners, the buildable stag beetle offers a delightful way to explore nature's wonders 🪲&nbsp;All pieces fit nicely together using the indentations and grooves. All parts are marked with a letter to make building easier. I've added a couple of pictures that serve as building instructions.&nbsp;The pictured model is printed with Fillamentum Extrafill PLA Wizard's Voodoo.&nbsp;Print settings<ul><li>No supports</li><li>100% infill</li><li>Arachne wall generator recommended</li></ul>ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Stag Beetle Buildable Animal Figure

buildables

Scattered Collectables

Easy to print Cubone skull with ornamental details, great for a display item.&nbsp;supports only needed for the bottom section&nbsp;Print outer walls slower to acheive presentable overhangs&nbsp;for rights to sell prints visit https://www.patreon.com/ScatteredCollectables

Cubone Skull Ornamental Pokemon

OlleMark

Updates:08-11-2023 - Added odd numbered options 2x3, 3x2 and 3x3.08-11-2023 - Added 3x4 boxes&nbsp;Inside boxes: https://makerworld.com/en/models/56160#profileId-57760&nbsp;My new and favorite box so far with smaller boxes inside to very easely pour out all of the content or move it.&nbsp;This is the smallest version and comes in 3 size variants and each with 3 height variants.&nbsp;Works great for screws or accessories. You can change the layout whenever you want, just print different sized inside boxes! :)&nbsp;The inside box slots are 30mm squared

golf

games

decor

tools

jeep

cool

random

cute

printer tools

clips

tests

clips and hangers

shelves

buildables

cool

storage containers