TimmyV

Truitt Arnhart

Finally, a pirate ship boardgame piece that&#39;s visually appealing and functional. It&#39;s an excellent alternative to the traditional wooden sailboats often used for games.&nbsp;I produced these as part of need that arose during design of a game I&#39;ve been working on for quite some time: No Quarter. It still has a bit of design work left, but I&#39;m excited to see it come to life.&nbsp;Could also be used as a fun multi-color Benchy for testing multicolor setup/print-quality!&nbsp;Let me know what you think!

Pirate Ship

boardgames

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

Gardening

agepbiz

<figure class="media"><div data-oembed-url="https://youtu.be/SNWnS3XnjX8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/SNWnS3XnjX8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of with a satisfying snap and leaves a nice clean edge. I have also adjusted the wing shape and the angle of the tail fins. I have also included a version with a brim<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model by <a target="_blank" href="https://www.printables.com/@agepbiz#join:144" rel="nofollow noopener">joining the Commercial license tier in my club</a> added a larger version (300). If you want to print the stands for it you have to upscale the stands to 150%Subscribe or follow me on:Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">www.instagram.com/agepbiz</a>YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">www.youtube.com/user/agepbiz</a>Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">www.twitter.com/agepbiz</a>Printsettings:No support No raft 0,15mm-0,2mm layer height 35-45mm/s

Print-in-place and articulated F14 Jet Fighter with Improved Wingdesign

Toys

Jameswatts1990

<h2>☢ Toxic Waste Lamp ☢</h2>Light up your office with a freaky toxic glow using this Toxic Waste Lamp. Inspired by the eerie glow of radioactive waste usually spotted in cartoons. Use <a target="_blank" href="https://uk.store.bambulab.com/products/petg-translucent?variant=40926167990332" rel="nofollow noopener">Bambu Lab Transparent PETG teal</a> for the transparent sections for the best results or experiment with other filaments to get unique glows from this lamp.&nbsp;Version 2:<ul><li>New more detailed lamp topper with additional and varied bubble design *recommended*</li><li>Bambu Lab LED 001 compatible version also available</li></ul>07/02/2024 - 2.1 - Large cutout for LED Kit version to allow switch to pass through without modifying the hole manually&nbsp;<h3>✅ Easy to Print</h3>The main body of this toxic waste lamp prints easily, using some minor supports you can get a perfect finish on the overhangs. The colour in the images is <a target="_blank" href="https://uk.store.bambulab.com/products/pla-matte-filament" rel="nofollow noopener">Bambu Matte Lemon Yellow</a>. If you use the .3mf to print, it has 3 walls to block most of the light and the infill has been removed from the front of the model to limit the shadows produced by light leaking through. Only 2 walls were used in the print in the images.&nbsp;<figure class="image image_resized image-style-side" style="width:23.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/534075/2024-01-28_b05d5b93f51db.jpg"></figure><h3>Transparent Lid and Front</h3>The front and top of this model has been designed to be used with transparent filament, although you can use standard filament as well with 1 wall to get a good glow as well. The .3mf has been edited for the transparent pieces to give them a better finish.&nbsp;The front prints as a 0.6mm thick sheet that is flexible. This allows it to bend and flex in to shape to fit into the supporting sections at the front of the model. As this piece is thin, be careful not to crack it when removing from the bed.&nbsp;The top pieces will simply slot into place atop the model.<h3>💡 Lighting Options</h3><figure class="image image_resized image-style-side" style="width:37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/534075/2024-01-28_542141ac46344.png"></figure>The model has a cutout at the back of the design to allow a <a target="_blank" href="https://amzn.to/488KA2J" rel="nofollow noopener">usb powered LED strip</a> to pass out of in to a battery pack or plug. There is a centre pole to allow you to wrap LED strips around if you wish.&nbsp;<ul><li>Nuclear Waste - LED Strip = LED Strips/Rope style lighting</li><li>Nuclear Waste - LED Kit 001 = Bambu Lab LED KIT 001 Compatible</li></ul>&nbsp;If you need to make the hole at the back larger, you can right click the model in the slicer and click add negative part to make a larger hole. You can also do this on the centre pole to remove it, if you are not using an LED strip.&nbsp;&nbsp;&nbsp;&nbsp;<h3>Why not try?.. </h3><a target="_blank" href="https://makerworld.com/en/models/185216#profileId-203919" rel="nofollow noopener">Magical Potion Night Lights and Alchemy Drawers </a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/534075/2024-02-13_814df7d9c3c46.jpg"></figure>

Toxic Waste Lamp - Eerie Radioactive Glow v2

Halloween

Meng Prints

Most helmet mounts come with a lot of supports needed. This one prints without support.Easiest way to assemble - turn mount 90° and assemble upper screw most way - then turn it down and assemble lower screw. Tighten both.&nbsp;3mf includes more strength in wallplate - though most helmet weigh less than 1kg not much more than 20% infill needed.

Helmet mount - no supports needed!

tools

Reckit

Made my own version of a P1S & P1P screen bezel based on @jogu44 version. I found the dimensions and bezel radius's to be slightly off. This one fits better (for me anyway)

P1S & P1P Screen Bezel

The Big Greek

Complete Rod Cleaner Z-Axis Version No.1 with Logo (simple and fast) Single Version&nbsp;★ New ★ Update from 29.12.2023 <a target="_blank" href="https://makerworld.com/de/models/112326#profileId-120249" rel="nofollow noopener">Automatic Z-Axis Lube Helper</a> ★ here is the link <a target="_blank" href="https://makerworld.com/de/models/112326#profileId-120249" rel="nofollow noopener">https://makerworld.com/de/models/112326#profileId-120249</a>&nbsp;★ New ★ Update from 21.12.2023 <a target="_blank" href="https://makerworld.com/de/models/102023#profileId-108654" rel="nofollow noopener">Rod Cleaner V2 Set + Lid + Toolcase Magnet Version</a> ★ here is the link <a target="_blank" href="https://makerworld.com/de/models/102023#profileId-108654" rel="nofollow noopener">https://makerworld.com/de/models/102023#profileId-108654</a>&nbsp;★ New ★ Update ★ <a target="_blank" href="https://makerworld.com/de/models/99424#profileId-105992" rel="nofollow noopener">Rod Cleaner Set + Tool Case</a> here is the link <a target="_blank" href="https://makerworld.com/de/models/99424#profileId-105992" rel="nofollow noopener">https://makerworld.com/de/models/99424#profileId-105992</a>&nbsp;<h3>★ Dont forget o clean your X-Axis ★ here is the link <a target="_blank" href="https://makerworld.com/de/models/89719#profileId-98171" rel="nofollow noopener">Carbon Rods Cleaner V2 X-Axis (simple and fast)</a> <a target="_blank" href="https://makerworld.com/de/models/89719#profileId-96043" rel="nofollow noopener">https://makerworld.com/de/models/89719#profileId-96043</a></h3>&nbsp;Based on the <a target="_blank" href="https://makerworld.com/de/models/89719#profileId-98171" rel="nofollow noopener">Carbon Rods Cleaner V2 X-Axis (simple and fast)</a> , I have now designed a Rod Cleaner for the Z-Axis. Again, it's Simple and short time to print.Of course, there is also a version that is a bit smoother but takes a little longer.&nbsp;LET'S GET STARTED!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_2390fb036d154.gif"></figure><ol><li>Print</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_ac8ecc42289ed.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_6d92973f821df.jpg"></figure>&nbsp;2. Take a sponge and cut 2 pieces to the size of 20mm x 30mm, just like with the <a target="_blank" href="https://makerworld.com/de/models/89719#profileId-98171" rel="nofollow noopener">Carbon Rods Cleaner V2 X-Axis (simple and fast)</a> , and press them into the designated openings. Now soak them with ISO<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_70401aa53f222.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_d9d9bf02ef0d1.jpg"></figure>&nbsp;3. Let's start the cleaning!&nbsp;Place the small box around the Z-Axis, hold it with your fingers, and press the desired direction on the display... the cleaning begins :-) Pay attention to the final distance of the Z-Axis Top and Bottom . Do not drive too far, as you could otherwise damage your printer.Cleaning the rear Z-Axis is also possible without disassembling the entire printer. For this, I recommend the Rod Cleaner Z-Axis Complete Version (what a name) here you dont need to hold it all the time, the tweezer makes it for you :-)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_db6ad16220329.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_19af0e1d1c595.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_0242a76fe13eb.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_ac1d6cddb1a58.jpg"></figure>&nbsp;4. The tweezer for the box with the spacer is very convenient. If you use this combination, you have your fingers free and can easily clean your Z-Axis as shown in the pictures. Of course, it can also be used without a spacer.<img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_fe174a641f46e.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_572c04a99f2e4.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_f1835362a064a.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_9b348ba16ee12.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_05e1c1c9c2c7c.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_e3051c947c0df.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_0205ce3e2f2cf.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_45328085ad19.jpg">&nbsp;&nbsp;4. After you're done, it should look like this :-)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_a85fb86992665.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_d100deacc503.jpg"></figure>&nbsp;5. After cleaning, you should grease the Z-AXIS again. The included grease in the accessories should be sufficient; if not, purchase new grease.&nbsp;easy to use, easy to clean&nbsp;Have fun building and cleaning!&nbsp;if you like my work/project consider supporting me with these options:<ul><li>leave a like</li><li>leave a comment</li><li>download the file</li><li><a target="_blank" href="https://www.buymeacoffee.com/thebiggreek" rel="nofollow noopener">or By me a Coffee</a></li></ul>I also appreciate comments a lot.

Complete Rod Cleaner Z-Axis Version No.1

bambu

Sevro

OverviewAn ethereal and light statue that shows love in artish style.&nbsp;I found that picture on internet as a tattoo on somebody arm and I had to bring it to the world of 3d printing. I recreated and changed it a bit so that it could be printed and presented properly. I don&#39;t know who is original author of this drawing.&nbsp;InstructionPrint and put in bottom base to achieve vertical pose, no glue is needed.To print it, there is need good adhesion to bed.Upper end of sculpture is bond with initial printer starter extrusion. It prevent roll up this section of model. Cut it after print.&nbsp;Update:17.12.23 version 2I made thicker version 2 mm so statuette is more rigid. Previous one 1 mm was too weak and flexible.19.12.23 version 3I changed a little design so it is yet more rigid and does not bend over time.09.01.23 version 4I added alternative larger base to second plate, because some users in comments section said that default base is too weak.