Tickless

luke

Stitch&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;The Model is 100x150mm in size Filaments Used:&nbsp; Black Transmission Distance: 0.3&nbsp; White Transmission Distance: 20 Swap Instructions:&nbsp; Start with Black&nbsp; At layer #8 (0.72mm) swap to White for the rest.

Stitch

stitch

Mr Potato

Octopus Skull Bic Sleeve&nbsp;Hope you guys like my uploads! Please Like / Download / Boost to support me 🙏

Octopus Skull Bic Sleeve V3

lighters cases

Faeriell

Here we have ParaGoomboHe can stand or hang him up :)Enjoy This little Guy.&nbsp;Its possible you need Brims when Printing the little parts!

ParaGoomba ( Super Mario)

need

krazi201

A simple “Pixel Heart 100%" keychain.It is very easy to change position of the hole in Bambustudio, if you would like it to be somwhere else.&nbsp;Please use my print profile and a 0.2 nozzle to get a decent result.Print on textured plate to have a nice surface finish.&nbsp;The colored layers are only 0.5mm in total to keep down printing time.As a result of this you might see black shadows through bright surface colors from black top layers (1mm in total).If you like to have brighter colors just change size/ratio of assembled objects as you wish.

Pixel Heart (100%) Keychain

keys chains

VRsculpts

These fun little ornaments mimic needle felting crafts using Bambu slicer's fuzzy skin function. I have the fuzziness cranked up to 1mm, you can tone this down if you wish. The bear and penguin print very easy with no supports, but the yeti gave me some problems and I think it's caused by the supports needed for his hands. Basically his horns did not print in the grey color, my printer just made them white for some reason even though I had the colors assigned properly and the preview in slicer looked correct. If you figure out what I'm doing wrong, please leave a comment!

Fuzzy Skin Friends - Christmas Ornaments edition: Polar Bear, Penguin, Yeti

A1 mini can print

Swiger3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Dark Gray At layer #17 (1.44mm) swap to Light Gray At layer #20 (1.68mm) swap to White for the rest.

Kitten sunglasses - Hueforge 4 color filament painting

can’t make

wuguigui

Updated 20231120I found the previous version base(1.0) has some issues as the images show, I improved the design, and now we have a new base(2.0).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/188731/2023-11-20_43b4bf5b8adc1.png"></figure><figure class="image"></figure>&nbsp;This is a coaster that can be printed 2 colors at once, usually a vivid color body with a white edge, you can choose any color you like. If you want to use a transparent material as the body, I recommend using 0% infill to get a nice light perception.There is a base include that can store 6 coasters.&nbsp;I printed it on A1 mini combo and P1P, all got a nice result. &nbsp;