TiBo-NL

Valeria Momo

Desk Ornament with "Trust me, I'm an engineer" text Frame size: 14 * 11 cm Material: PLA A unique and stylish way to add a touch of personality to your home or office.It's perfect for engineers, technology enthusiasts, or anyone who appreciates modern design.Best gift for an engineering degree.&nbsp;Also look at our <a target="_blank" href="https://makerworld.com/en/models/88441" rel="nofollow noopener">lightbox </a>or <a target="_blank" href="https://makerworld.com/en/models/127094" rel="nofollow noopener">keychain</a>!&nbsp;<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model<a target="_blank" href="https://patreon.com/ValeriaMomo?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link" rel="nofollow noopener"> by joining the Commercial License in my Patreon</a>.

Trust Me Desk Frame

signs

antoinehendrick1987

Lightbox i don&#39;t know my age&nbsp;See also my other uploads of lightboxes and clocks.<a target="_blank" href="https://makerworld.com/en/u/1835453854" rel="nofollow noopener">https://makerworld.com/en/u/1835453854</a>&nbsp;If you want something that is not listed, please send me a message and I will see what I can do.&nbsp;Greetings Antoine

Lightbox i don't know my age

lamp

functionalSimon

Hooks for fiamma and thule awning systems.Complete package with 4 different types of hooks.&nbsp;Bring some style and versatility to your campervan or RV with this awning hooks.  Whether you're out on a long road trip or just enjoying a weekend getaway, this awning Hook is a must-have accessory for keeping your campervan or RV organized and stylish. Order now and enjoy the convenience and style of this versatile campervan accessory!This package contains 2 hooks!If you like this product please see our shop for other variations

Fiamma / Thule awning hooks for campervan / autocampers

holiday 

Hi, This time I designed a cutlery organizer for the Knoxhult drawers.&nbsp;Nothing much to say, no tools needed, it just assemble each other together but note that the tolerances are pretty tight so if you do it wrong it's gonna be a pain in the *** to disassemble.It contains 3 compartments for cutlery, 2 compartments of which one is larger for bread knife or similar. 1 compartment for tassimo cups and 1 small compartments for whatever you want.&nbsp;The bigger compartment is made in 2 parts, assemble them before adding it to the other parts. Refer to the pictures for assembly.&nbsp;I'm open to suggestions if you want a compartment for a particular need. Contact me on <a target="_blank" href="https://www.instagram.com/lazyxworkshop/" rel="nofollow noopener">instagram</a>.&nbsp;Update1: Added more compartments that make the organizer filling all the space in the drawer. Update2: Added more compartments for better modularity.

Ikea Knoxhult Cutlery Drawer Organizer

Keuken

HpInvent

Here is a super cute easter decoration for you to print ;)This time its a more modern design.  The model is seperated on two plates: On the first plate is the bunny, on the second plate is the flower head. So its easy to print the flower head in a different colour. For the stem of the flower simply cut a piece of 1.75mm filament and stick into the flower head. The flower head also hase some grooves so its easier to fold it and give it a little more natural flower shape.  Et voila, the bunny is finished! I sliced it a little smaller to take some time of the print. Simply scale it to your liking, there is enough resolution in the sculpt;)Printed with support. NEW : Below is a link to his cute little modern friend with hanging ears ;) IN THE LINK BELOW YOU CAN ALSO FIND THE CUTE MODELS OF THE CONTEST BANNER!! I have a bunch more cute easter decoration in my profile that is not part of this contest!!!! So don&#39;t forget to print his cute little friends and my other models: <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a><a target="_blank" href="https://makerworld.com/en/models/428498" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-04-15_f027d438d0393.png"></a><a target="_blank" href="https://makerworld.com/en/models/426994" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-04-15_b0f8912a15393.png"></a><a target="_blank" href="https://makerworld.com/en/models/427979" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-04-15_b1e75bac7bd51.png"></a> <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-03-08_a8a626fc04c78.png"></a> <a target="_blank" href="https://makerworld.com/en/models/194458" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-02-23_539193d8507ba.png"></a><a target="_blank" href="https://makerworld.com/en/models/210984" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-02-28_8818bd98777e4.png"></a><a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-02-27_c1e7b8a459e5d.jpg"></a><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/860122/2024-03-06_ea517b7dbe741.png"></a>Happy printing!

Modern minimalistic easter bunny with flower hands

pasen

GiskardReventlov

Only print the “print-in-place” version in PLA and if you are certain of your printer and filament tolerances and that your filament is well dried. Otherwise, print the parts separately using printing supports on the shelf support part (Support_ONLY.stl).--------------------------------------Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model.&nbsp;Update 2: I now recommend printing the “Shelf_ONLY” and “Support_ONLY” files separately using supports on the “Support_ONLY” file. Many people reported not being able to separate the parts on the print-in-place version.--------------------------------------A print-in-place shelf for the top of computer monitors and TVs.<ul><li>The support arm is adjustable and has a single contact point with the monitor, so it fits firmly and easily also curved-back monitors.</li><li>Perforated to not block monitor cooling.</li></ul>Instructions to separate the parts after printing (only takes 10 seconds):<figure class="media"><div data-oembed-url="https://youtube.com/shorts/sEQsrMtvIG0"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=sEQsrMtvIG0"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/sEQsrMtvIG0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>No supports needed for printing, just slice and print in the orientation that the files comes in.<ul><li>Print in PLA! If you want to print in PETG, print the parts separated and use supports, don't use the the “print-in-place” file, it will not separate!</li></ul>It's strong! Don't worry about putting heavy stuff on it - but I wouldn't put any liquid…<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/724759/2023-12-10_hyy4fbaqax0k.jpg"></figure>STEP file included. Feel free to remix and share, but please use the attribution feature.

Adjustable Monitor shelf - Fits any display

tools

Klaas

wotfan

I recommend printing with a .2mm nozzle at .14mm layer height.&nbsp;There is a second version included without text on the sign. Text can be added using your slicer.&nbsp;The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with adhesive).

Multicolor Wile E. Coyote with Sign Magnet

masks, cartoon

RETIRED GUY 3D PRINTING

CROC SHOE JIBBITZFOUND SOME NAILS AND DIGITS AND RESHAPED THEM FOR ANGLES AND HEIGHTCREATED A FASTENING SYSTEM SO THAT THEY WOULDNT TOUCH OR RUB ON YOUR TOESA LITTLE SUPER GLUE ON THE PIN AND PUSH INTO TOE UNTIL IT BOTTOMS OUTFITS THE HOLES AND DEPTH PERFECTLYIMPRESS YOUR FRIENDS OR TOTAL STRANGERSTHANKS FOR LOOKING AND HAPPY PRINTING

CROC TOES JIBBITZ

Sevro

Update: 08.10.2023I added base with holes for M3 Screws. Use it when pins in your standard Base not fit well or broke down when printed.&nbsp;OverviewI present my my ultimate plane launcher.Easy to print and assemble. You have to only fold you favourite paper plane, load, aim and shoot it to fly. You need to only 3 rubber bands to have fun with it. One small for trigger and two larger for launcher (one for each side). Launcher is projected to assembly without screws and glue but your clearence may be different than mine. If somewhere cover don't fit correctly simply use glue to fix cover to base. After proper assembly you won't have to look inside. Rubber inside handle, stays for very long. Mine didn't break yet. Rubber bands on launcher can be strech in three position depends on rubbers size and desired force.Warning: Shoot only with a loaded launcher. Shooting without a load can damage the "barrel". The occurrence of damage depends on the force of the rubbber bands.&nbsp;To print “base” and “trigger middle” use supports for rubber bands hooks. ( I often forgot about that but despite this prints went well )Below is simple schematic of assembly.<figure class="image image_resized" style="width:82.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/75491/2023-08-14_hnasrabhm0z0.jpg"></figure>&nbsp;To load correctly, the trigger must be in the up position. Often you have to set it with your thumb in the right position as in the video below&nbsp;Loading looks like that<figure class="image"><img src="https://media.printables.com/media/prints/415098/rich_content/7d798460-cad5-42ab-960a-c535ea28eb20/giphy.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/415098/rich_content/c065fda1-dfa9-4596-a8ae-e78fc4bd9c7b/giphy.webp"></figure>And launching<figure class="image"><img src="https://media.printables.com/media/prints/415098/rich_content/8acfd9e7-f993-4ec8-970c-ed1d5692a655/giphy-2.webp"></figure>&nbsp;&nbsp;I designed small glider thar cooperate with launcher.It is available here:<a target="_blank" href="https://makerworld.com/en/models/16774#profileId-15557" rel="nofollow noopener">https://makerworld.com/en/models/16774#profileId-15557</a>and works like that:<figure class="image"><img src="https://media.printables.com/media/prints/415098/rich_content/74b00a80-1e55-4d9d-b0a8-ef45f0b99777/swift.gif"></figure>Have fun&nbsp;&nbsp;

Ultimate Plane Launcher

spellen

fay3dlab

&nbsp;A few months ago, i sold my Polygon Bend R2 bike due to financial constriction and i wasn't cycling all that much.. As nostalgia memories kick in I began to think what i can make with the bicycle in mind.. and after a few days.. the mini bicycle card came to fruition..The whole kit card was modelled using Tinkercad and 3d printed using Bambulab P1p..Assembly video can be found here: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=LcFwJKVBVuo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/LcFwJKVBVuo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><a href="https://www.buymeacoffee.com/fay3dlab" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/arial-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 109px !important;" ></a>

Mini bike kit card

2d card puzzle

justinwille9666

Pimp your light with these easy to print cubic lamp shades.&nbsp;Print Settings:line width: 0.6mm (works fine with 0.4 nozzle)spiral vase: onbottom layers: 7layer height: 0.16&nbsp;They are working with every lamp with an external thread around 4cm &nbsp;example: https://www.amazon.de/Linkind-Lampenaufh%C3%A4ngung-H%C3%B6henverstellbar-Pendelleuchte-Lampenhalterung/dp/B094HY8VC6/ref=asc_df_B094HY8VC6/?tag=googshopde-21&linkCode=df0&hvadid=526495320941&hvpos=&hvnetw=g&hvrand=15052909721952127031&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9116154&hvtargid=pla-1379022261744&psc=1&th=1&psc=1&nbsp;

Pimp your pendant lamp! 

Licht

JamesThePrinter

This is a Christmas tree designed in a flat pack style. All three sections of the tree slide together and get topped by the star. All sections are printed with no bottom or top layers. This allows the infill to be the the main pattern across the tree. The tree shown has a 50% triangle infill, but many others would look good as well.Other ideas:<ul><li>No infill, just perimeters for hollow pieces</li><li>Use top/bottom layers normally</li><li>Lower infill percentages, but with infill line width multipliers</li></ul>Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>

Christmas Tree - Flat Pack Style

kerst

Lofted Goods

A mid century modern vase.&nbsp;No supports needed. Easy print. Can be scaled up or down however you like.&nbsp;Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: <a target="_blank" href="https://hendricks.design/links/" rel="nofollow noopener">https://hendricks.design/links/ </a>

MCM Vase

vaas

chameko小廢物電波塔

<blockquote>12/06 After many tests, I successfully found out the cause of the assembly problems reported by some users, and modified the side panel file "AMS Dry Box-SW_v2".NOTE!I Designed this model not only for ams, I also used it in the vacuum bag that holds the filament, so I needed tight tolerances to make the box strong enough. The tolerance is 0.3mm, please be sure to confirm before printing this model.</blockquote>Open the side lid and pour about 60g of silica.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_92a6870d48198.jpeg">&nbsp;There is a buckle design on the top, please make sure it is buckled correctly when installing.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_2f71bc9cf33e9.png">&nbsp;&nbsp;The front and back of the V2 version have relaxed tolerances in most areas, making it easier to install. I kept the last small area because without this part, you might get the box and slide it open like in the second picture, resulting in a mess.Please be careful not to install it in the wrong direction when installing.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_fcf2db2bab532.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_210d78c4699ec.jpeg">&nbsp;If you have trouble assembling them, try using a heavy object to knock them into the correct position.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_e0f13f6121362.jpeg">&nbsp;As for why I used this complex design, it was because I considered that he had to withstand several kilograms of impact from the filament, so I wanted to distribute the force as equally as possible to each part.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_90a605e9c843e.png"> <blockquote>Also I have a beautiful model related to AMS! Don’t miss it!</blockquote><figure class="image image_resized image-style-side" style="width:56.75%;"><a href="https://makerworld.com/zh/models/99476#profileId-106044" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-23_3d850a0169288.jpg"></a></figure>Do you always find the AMS feeder difficult to press? Are the models on the Internet very difficult to install? I have improved and carefully designed this model. Please be sure to try it!(click on the image to go to the page!)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<blockquote>----------中文解說----------</blockquote>打開側蓋後約可倒入60g的乾燥劑. 上方具有卡扣設計,安裝時請確認有正確的扣上.&nbsp;V2版本的正面與背面放開了大部分區域的公差,使其較容易安裝. 我保留了最後一小區域,因為沒有這個部分的話,你可能再拿取盒子時像第二張圖一樣滑開,導致一團糟. 安裝時請注意不要裝錯方向.&nbsp;如果你在組裝上遇到了困難,可以嘗試使用重物敲擊他們使其安裝至正確的位置. 至於為什麼使用這種複雜的設計,是因為我考慮到他必須承受數公斤來自線材的撞擊,因此我想盡可能地讓力量平均分攤到每個部分.

AMS Silica Gel Box[V2]

bambu

Amao Chan

This is an African elephant with 22 movable joints. The joint design of this elephant is different from the common chain-like design. These joints can be adjusted and fixed at different angles, allowing the elephant's trunk to be lifted and posed in various preferred positions. The tightness of the joints depends on the hardness of the materials used for printing. Using harder materials will result in tighter joints.&nbsp;The reason it is named "Blank" is to encourage the printer to add color to the elephant's body. For those with multi-color 3D printers, they can try printing each segment in different colors.&nbsp;When printing, please start by printing the tail. If the tail can rotate properly, then use the same printing settings to print the other parts. If the tail gets stuck and cannot rotate, please reduce the material flow to continue printing.&nbsp;3D printing settings Layer height - 0.2mm Infill Density - 12% No supports. <a target="_blank" href="https://www.facebook.com/amaochanstudio/" rel="nofollow noopener">https://www.facebook.com/amaochanstudio/</a> <a target="_blank" href="https://amaochan.work/" rel="nofollow noopener">https://amaochan.work/</a>&nbsp;多關節素坯非洲象這是一隻有22個可轉動關節的非洲象這隻非洲象的關節設計與常見的鍊條式的設計不同，這種關節可以調整角度後固定，因此這隻大象的鼻子可以抬起並且擺出自己喜歡的姿態。大象的關節結緊迫程度與使用的材料硬度有關，使用愈硬的材料列印則關節的緊度愈緊。之所以取名為(白胚)的原因，就是鼓勵列印者能幫大象的身體上顏色，若有多色3D列印機的朋友就可以試著在每一段使用不一樣的色彩列印。&nbsp;列印建議 列印時請先列印尾巴，若尾巴能正常轉動，就以相同列印設定來列印其他部分。若尾巴卡住無法轉動，請減少材料流量來列印。 層高-0.2mm 免支撐 填充-12%