The Wally World

3D Art

PTFE cable chain clip P1P,P1S and X1C

PTFE clip P1P,P1S and X1C

Built

N33 Designs

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/467459/2024-01-17_37267cdfc4d23.gif"><figcaption>Click image on mobile app to see animation</figcaption></figure>This rotating base is the perfect way to show off your stunning moon lamp.Designed for use with the LED puck that comes with the <a target="_blank" href="https://uk.store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">Bambu Lab lamp kit</a> and <a target="_blank" href="https://makerworld.com/en/models/44705#profileId-48497" rel="nofollow noopener">Tom Fullen's SVS NASA Moon Globe</a> (100 or 90% scale)&nbsp;edit: I now have a version with a motor to rotate automatically, you can find it <a target="_blank" href="https://makerworld.com/en/models/161426#profileId-177193" rel="nofollow noopener">here</a>&nbsp;The LED puck fits perfectly with the cable routed through the centre and out the back of the base.&nbsp;Bearing (Optional)The model was designed around the 6205 bearing which is big enough to allow the USB plug and switch to pass through the centre. I've included a print in place bearing on plate 2 (credit: <a target="_blank" href="https://www.thingiverse.com/thing:4808507" rel="nofollow noopener">KevinJarta</a>)After printing I found it spins pretty well without the bearing, so maybe give it a try without before printing the bearing.  AssemblyAssembly is very straight forward, assemble parts as shown below.The bearing (if used) will be positioned correctly by the rails in the base and main body parts. You can add some lubricant to the bearing to improve smoothness. Once assembled check that the bottom of part 1 is flush with the bottom of the base (part 4). If not, place on hard surface and push part 2 down hard and it should click into place. Also check that the cable notch in the bottom of part 1 aligns with the notch in part 4, if not, twist from the top to align.Route the USB cable through from the top and position in notches.<figure class="image image_resized" style="width:48.21%;"><img src="https://makerworld.bblmw.com/makerworld/draft/467459/2024-01-17_0b7b8d97abf99.png"></figure>&nbsp;Don't have the LED lamp kit?If you don't have the LED lamp kit, you can buy the LED puck from <a target="_blank" href="https://s.click.aliexpress.com/e/_DeaTouN" rel="nofollow noopener">AliExpress</a>  &nbsp;

Rotating base for moon lamp (LED lamp kit compatible)

adw.dsgn

I was inspired by some of the pick cards shared by creators on here to design a business card for my guitar teacher. I was really happy with the design, so I decided to post a customizable version for everyone. Print one for yourself or the guitar players in your life! The picks work suprisingly well Experiment with different filaments and different thicknesses by scaling the model in the Z axis. consider printing upside down for a better finish on the text. To edit the text, select objects under the process tab in Bambu slicer, right click text shape and select edit text. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453352/design/2024-05-04_30363b115d66f.png"> You can then edit the text in the dialog box <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453352/design/2024-05-04_df97183e37b79.png">

Customizable Kumiko Guitar Pick Business Card

Ideas

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

Plants

SabreDesign

Model kit of the famous Executor-class Super Star Destroyer from Star Wars episode V. Scale is roughly 1:100000. The model is 180mm long and the parts are straightforward and easy to assemble. Also added a stand to display the model in a stylish way.&nbsp;Make sure your printplate is clean for optimal bed adhesion, since there are some small parts. Depending on your printer and filament the part tolerances may vary. The current model has been tuned on one of my P1S printers and the parts snap together nicely with the connecting pins. You can however use small amounts of glue to adhere the parts together.&nbsp;If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/836488/2024-04-06_ced30df86d52e.png"></figure> <img src="https://makerworld.bblmw.com/makerworld/draft/836488/2024-04-06_6d343d7865827.png"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/836488/2024-04-06_f228c85b692d2.png"></figure>&nbsp;&nbsp;

Built

TB

Ideas

Plants

Gifts