ThePrinterDE

vidguide

Remixed and assembled into a single 3mf file for easy printing. 5 Plates to simplify color layout, and additional coloring performed on the door and control panel. Some assembly required after printing.

Monsters Inc: Boo's Door, Assembly & Canister - Colorised and laid out for AMS printing

Deko

KENPRINT

I previously had a version of this when I got my first p1p however it appears Bambu modified the base of the printer and the original model didnt fit the newer machines incl the P1S correctly&nbsp;This model should be a perfect fit for the left hand side of the machine and slide snugly into the holes in the printer casing underneath

Bambulab P1S and X1C super slim plate storage new

PrinterTools

misenique

To celebrate easter I decided to make an egg shaped Pokéball twist lock container. This container is perfect as a “giftbox” or as gift itself.It features the same twist lock bayonet mount like my Love Ball. The size is proportional to a “real” Pokéball instead off an egg. The Diameter is about 75mm. <h3>Mechanism:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/763515/2024-03-08_5e333aebe394e.gif"></figure> <h3>How to assemble?</h3>You only need the printed parts and some drops of super glue. The different print profiles are set up with colors for the classic Pokéball, aswell as the Premierball. If you want any specific color combinations, just drop a comment.The square cutout is only meant for alignment. Please glue the shell+inner. If you don't do this, the square will probable break due to stress. <h3>Print Profile information:</h3>The print profile is standard 0.2mm but with adaptive layerheights at the top for best round tip. The outer walls are also slowed down to give a uniform look. I suggest to print with my profiles.  If you have any questions, just drop me a comment! Searching for an EGGstra special gift Bowl?<figure class="image image_resized" style="width:36.67%;"><a href="https://makerworld.com/en/models/378164#profileId-278121" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/763515/2024-03-17_d5f9ab6dceb89.jpg"></a></figure>My new Organic Leaf Pattern Lamp (click picture)<figure class="image image_resized" style="width:36.78%;"><a href="https://makerworld.com/en/models/394045" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/763515/2024-03-25_d4b90add93ac7.jpg"></a></figure> Check out my cute Sriracha Keychain! (Click picture)<figure class="image image_resized" style="width:38.91%;"><a href="https://makerworld.com/en/models/252732#profileId-269066" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/763515/2024-03-14_89674995ef21d.webp"></a></figure> Also check out my Love Ball (same mechanism but parts of this model are not compatible yet)<figure class="image image_resized" style="width:40.22%;"><a href="https://makerworld.com/en/models/150707#profileId-164400" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/763515/2024-03-08_aecf17bb93a3c.webp"></a></figure>Charizard Bookmark<figure class="image image_resized" style="width:39.26%;"><a href="https://makerworld.com/en/models/125386#profileId-135417" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/763515/2024-03-08_b26042f5fdb9f.webp"></a></figure>  &nbsp;

Easteregg Pokéball Set Container for Gifts Pokemon

Diverses

Nigel

Loving my A1, but it's a little messy… and I'm a little lazy. So I developed this poop conveyor. This project is not intended to define how you power the conveyor, I use a pico-controlled 38mm high NEMA17 stepper, which is less than ideal, but works for me. If there is any interest, I'll publish how I made my electronics, and upload a blank coupler so you can customise the connection. You'll be good if your drive spindle centre is 28.2mm off the ground.<h3>Additional bits</h3>You'll need four 608 bearings, <a target="_blank" href="https://makerworld.com/en/models/148066#profileId-161542" rel="nofollow noopener">3d printed ones will do</a>. Ideally, you'll also have a poop deflector that aims the poop more downward, <a target="_blank" href="https://makerworld.com/en/models/148066#profileId-161542" rel="nofollow noopener">like this one</a>. You'll need to work out a way to drive the conveyor, You may also require two M3 screws to hold the spindle caps on the one spindle. Tracks are assembled with filament from the end of a roll.<h3>Printing</h3>I'd recommend printing everything in PLA, for no particular reason, it's just easier and the project has no specific needs. The tracks work fine for me in PLA, but if you're printing in PETG a lot, then the poop can be quite hot, and I have had it stick to the conveyor a bit until it's scraped off underneath after a while. Maybe print the tracks in PETG for more heat tolerance.<h3>Assembly</h3><ul><li>Slide the box halves together and insert the lock pins in the insides.</li><li>Add your bearings of choice. They should be tight, but not require a hammer.</li><li>Assemble the track using 32 links, don't close the loop yet. Depending on what you print them in, the holes may require drilling out to 2 mm. They are designed to use a piece of end roll filament as it is naturally curvy enough to ‘lock’ in place.</li><li>Slide the track in from the ‘bin’ end, and rest it on the track support in the box.</li><li>Put the drive wheel inside the box and slide a spindle through the bearings and drive shaft.</li><li>Put the second drive wheel in for the ‘bin’ end but don't put the spindle on it yet, and then close the track with the final bit of filament.</li><li>If you lift the box and hold it from the drive end, the track should hang at the right point for you to insert the second spindle.</li><li>For the spindle at the ‘bin’ end, you can screw on the spindle caps with M3 screws of your choosing.</li><li>Now you just need to attach the motor to the drive ned and you're off.</li></ul><h3>Electronics</h3>I use a <a target="_blank" href="https://thepihut.com/products/raspberry-pi-pico?variant=41925332566211" rel="nofollow noopener">PICO (with headers)</a> to power things, I have no idea how to set this up and get stuff working properly, so I followed the <a target="_blank" href="https://projects.raspberrypi.org/en/projects/getting-started-with-the-pico/3" rel="nofollow noopener">PICO install micropython</a> guide and it seemed to work eventually. I also use the <a target="_blank" href="https://thepihut.com/products/raspberry-pi-pico-motor-driver-hat?variant=39949999505603" rel="nofollow noopener">motor shield</a> and a <a target="_blank" href="https://thepihut.com/products/nema-17-stepper-motor-42mm-x-34mm" rel="nofollow noopener">NEMA 17 stepper motor</a>. Here is the code I used to drive it. Tweak, and you do you. I can't seem to upload a python file.&nbsp;#####################################from machine import Pin import timeled = Pin("LED", Pin.OUT)# Stepper motor controller M1E = 17 # Enable M1A = 21 # Phase 1 M1B = 20 # Phase 2M2E = 16 # Enable M2A = 19 # Phase 1 M2B = 18 # Phase 2 #step_count = 8m1e = Pin(M1E, Pin.OUT) m1a = Pin(M1A,Pin.OUT) m1b = Pin(M1B,Pin.OUT)  m2e = Pin(M2E, Pin.OUT) m2a = Pin(M2A,Pin.OUT)  m2b = Pin(M2B,Pin.OUT)step_ms = time.ticks_ms() # to calculate deltas step_delay=1000 step_now = -1 # Starting stateled_ms = time.ticks_ms() # to calculate switch off LED time led_delay=10;def setStep(p1, p2, p3, p4):     m1a(p1)     m1b(p2)     m2a(p3)     m2b(p4) def doStep():     global step_now, step_count, n     step_now += 1     if step_now >= step_count:          step_now = 0     setStep(n[step_now][0], n[step_now][1], n[step_now][2], n[step_now][3]) def setup():     global n, led_state, step_count      # motor loop enable, set value 0 to disable     m1e(1)     m2e(1)    # Set up the motor driver energise loop     step_count = 8     n = list(range(0, step_count))     n[0] = [0,1,0,0]     n[1] = [0,1,0,1]     n[2] = [0,0,0,1]     n[3] = [1,0,0,1]     n[4] = [1,0,0,0]     n[5] = [1,0,1,0]     n[6] = [0,0,1,0]     n[7] = [0,1,1,0]          led(0)     print("Setup complete")def loop():     global step_ms, step_delay, led_ms, led_delay     now_ms = time.ticks_ms()     if now_ms > (step_ms + step_delay):         led_ms = now_ms         step_ms = now_ms         led.value(1)         doStep()    if now_ms > (led_ms + led_delay):         led.value(0)setup() while True:     loop()

A1 Poop Conveyor

Lego

Deviian

Model of a splitter for AMS Lite designed for using an external spool without constant disconnecting of the PTFE tube.&nbsp;Designed for PTFE tubes with an outer diameter of 4 mm and an inner diameter of 2.6 mm. Same as used by BambuLab.The openings for PTFE tubes are intentionally tighter; try to insert the PTFE as deeply as possible."<ul><li>It is designed above the print head (see the photo, the length of the lower tube is approximately 40 mm).</li><li>Before installation, it is necessary to disconnect all PTFE tubes and thread them through the splitter."</li><li>It is necessary to insert the tubes firmly into the splitter to avoid tube falling out or filament jamming. Be cautious about tube crimping or potential breakage.</li></ul>When not using an external spool, it is necessary to have the filament retracted outside the splitter. This will clear the path for filament from AMS. When using an external spool, it is necessary to do the same, simply rotate the filament spool.