TheGabbo26

INNERVISION

I decided to create this model because my waste basket is positioned on the shelf under the printer, and this solution came to mind. You can easily adjust the length/direction of the tunnel by adding/removing tubes of different lengths and angles. I have printed and tested all tolerances, but to prevent failed prints, I recommend reading the description below.&nbsp;Magnetic Modular Poop Chute Tunnel for Bambu Lab printers. This 3D print model offers an adjustable-length and angle.Designed for easy assembly with magnetic connection, this model allows quick customization of desired length and angle. The adjustable features cater to various printer setups, ensuring compatibility with X1C/P1P/P1S Bambu Lab models.Compact and sleek, the tunnel seamlessly integrates with the printer&#39;s aesthetics while providing a discreet and efficient waste disposal solution.&nbsp;All parts are modeled with tolerance taken into account, but please pay attention to the different support types required for the magnetic frame and other components.<ul><li>Filament: PLA</li><li>Support for Magnetic frame: please print the part with normal supports facing the magnet slots up</li><li>Support for other parts: for the angular connections please use slim trees supports</li><li>Layer - 0.2mm</li><li>Brim: i recommend using inner brim for the tubes</li><li>Magnets: 12 pcs of various sizes (ensure to check for the correct magnetic plate option)</li><li>At the moment, this build is not compatible if you&#39;re using a back spool. I will add a solution in the near future</li></ul>UPDATES:08.02.2024<ul><li>added Magnetic Frame for 12 magnets 8x3mm</li><li>added Magnetic Frame for 12 magnets 6x3mm</li><li>added Magnetic Frame for 12 magnets 8x3mm (to fit under the old AMS hub)</li><li>added Main Tube without the monitoring hole</li></ul>14.02.2024<ul><li>added short version of Main Tube part (with and without monitoring hole)</li></ul>22.06.2024<ul><li>added Magnetic Frame for 12 magnets 10x3mm</li></ul>

X1C MOD