I've pinted a number of these now snd I'm wuite hsppy with the results. I'm using the provided profile on the 160x160's. Filament is Elegoo matte grey calibrated. Prints come out looking great.

My second of your collection. Everything just works, no fussing with the fitment of the parts at all, a couple of drops of glue here and there is all that's needed. These are all great, thanks!

Perfect and cute! I just wish I had a matte dark brown. The only parts that needed glue for me were the eyes. The nose and antlers were a tight enough fit that you'd have to work to seperate them.

I was worried about messy overhangs so I slowed things right down to 75 from the start and was quite happy with the outcome, not a single visible layer line. This will be receiving a color changing light as soon as I get the base printed up. One thing to mention is that the base is a really really tight fight, I thought I was going to break something marrying the two up. I'm going to be doing another one and I'll probably upsize the tree by 1% just to help that out a little. I printed in PLA Matte though I'm not sure that would be a contributing factor. Both parts had been off the printer for hours before I tried so residual heat was not a factor either. I now print this X and Y increased to 100.30% and makes the fixture fit firmly without being too tight to insert. Updated with some color shifting images, I have it cycling through the gamut of color and works very well with this tree when printed in white. Boosted.

No AMS, I've been using the AMS files to find the color changes and adding manual pauses before syncing with my filament, then reslicing once my filament has been synced and selected.

Printed it realy slow, If I do this again I'll go down to .08 I think. It's a new filament to me and despite drying I think it needs more, so back in the dryer it goes. I'm still very happy with the outcome, looks great with a 2 color silk. This is blue/purple from Bambu. Boosted.

thanks!

thanks! work perfectly

Printed up perfectly. I edited the variable layer settings to max out the bottom details to just before the risers and the very top of the lid. Sunlu Matte Black PLA. I didn't check what the layers were defaulted to when I did this for the risers. if I had paid more attention I would have kept it at 20 but it dropped it off even lower. If I ever print another one I'll be more on top of it now that I know more about variable layers.

Perfect, thanks!

Flawless, thanks!

working perfectly ty!

worked perfectly

ignore the odd texturing in the print. I was experimenting with variable layer heights for the 1st time to see the affect it has. the print worked perfectly and works as intended. It fits perfectly between the feet and holds the computer upright with no concerns of it coming out of the stand.

worked for me at Safeway in Vancouver (.25). I've not had a chance to test the 1.00 token. all my usual haunts are .25 and I don't even know if 2.00 is a thing. I've never seen 2.00 carts, though they must exist somewhere to need to create a token.

Does exactly what it needs to do, printed 4 of the large for the drawer I'm using to store the extra filament. matte black sunlu.

nice print, my hygrometers came from AliExpress and I had to guess at notch placement as it's different than what's here by about 105 degrees, but at least this print allowed me to rotate the notches which was very helpful

No AMS, but I did print 2 color for the lid by separating the objects elements and printing the text first. If you try to do this, turn off bed leveling for the lid portion of the print and don't print the text anywhere near the center of the bed. the normal lid was too loose for my taste but I kept it, may add magnetic closures in the future. Printed the tighter lid up as well. It seals tightly (a little too tight brand new) but I imagine it will ease up over time as I just used pla, but stays properly closed which the normal one wasn't, it was only staying in place with the help of gravity. All in all it does exactly what I needed, thanks!

does just what its designed to do, as others mention, it's a tight fit but it's nice not having to try and find just the right print to match the notches. my hygrometers came via AliExpress and they are in a different position than the ones from Bambu or Amazon.

kids love them, prints perfectly, no issues.