Thatguyadz

3Dacores

Bambu Lab where innovation meets craftsmanship in the world of 3D printing! Illuminate the heart of our workspace! Your 3D printing room, adorned with the radiant glow of this lightbox, is where ideas come to life.&nbsp;The Bambu Lab lightbox symbolizes the vibrant energy that fuels the passion of this company for pushing the boundaries of 3D printing technology.&nbsp;Join their journey of innovation, where technology meets artistry, and see your visions materialize with unparalleled precision under the gentle radiance of the Bambu Lab lightbox.&nbsp;Attention: The hole for led strip/light was not included in the design so that users can design it with the dimensions they want in the slicer software.&nbsp;<blockquote>Disclaimer: The use of the Bambu Lab logo is subject to the ownership rights of the respective owners. The Bambu Lab logo, including any associated trademarks or intellectual property, remains the exclusive property of its rightful owners.I respect the intellectual property of all brands mentioned in this design. If you think this design infringes on the ownership rights of the trademark, please submit a copyright complaint, and this design will be removed immediately.</blockquote>

Bambu Lab Lightbox | LED Lamp | Illuminate Your Creativity

Signs 

filete3d

Airless Tennis Ball version 1.1. Tested and approved! &nbsp;After several tests, we concluded that the geometry presented in this model is the one that performs the best with the given materials.&nbsp;The conclusions on recommended materials show that to achieve impact resistance it must be printed on flexible materials with a certain level of hardness to keep bounciness.&nbsp;The best material to print this ball is TPU 98A since it gives a bounce similarity to the real one. (Almost 50% from the drop distance)PLA Flex also gives a bounce similar to the official one but can be seen some cracks after a while of use. (We are testing a new mesh redesign for this material in particular).TPU 95A resists impacts without breaking but has a bounce reduced to approximately 20%.&nbsp;PLA or PLA+ will work only for displaying purposes. We do not recommend using these materials if you want to make it bounce as it can break easily.&nbsp;v1.1 Fixed seam line detail to enhance bevel from hex mesh.&nbsp;V2.0 already uploaded!, check it out here: <a target="_blank" href="https://makerworld.com/en/models/253687#profileId-270125" rel="nofollow noopener">https://makerworld.com/en/models/253687#profileId-270125</a>&nbsp;Check my current state on airless balls:Airless Ping Pong ball <a target="_blank" href="https://makerworld.com/en/models/386079#profileId-286461" rel="nofollow noopener">https://makerworld.com/en/models/386079#profileId-286461</a>Airless Tennis Ball v2.0 <a target="_blank" href="https://makerworld.com/en/models/253687#profileId-270125" rel="nofollow noopener">https://makerworld.com/en/models/253687#profileId-270125</a>Airless Baseball Wiffle Softball Ball v2.0: <a target="_blank" href="https://makerworld.com/en/models/227359#profileId-244997" rel="nofollow noopener">https://makerworld.com/en/models/227359#profileId-244997</a>Airless Basket , Soccer, Voley or Handball Ball v1.2: <a target="_blank" href="https://makerworld.com/en/models/223189#profileId-241192" rel="nofollow noopener">https://makerworld.com/en/models/223189#profileId-241192</a>Airless Golf Ball: <a target="_blank" href="https://makerworld.com/en/models/383904#profileId-284030" rel="nofollow noopener">https://makerworld.com/en/models/383904#profileId-284030</a>&nbsp;&nbsp;&nbsp;

Airless Tennis Ball v1.1

Fun Projects

SD4LABS

<h2>Circular Hygrometer/Thermometer Printer Mount</h2><ul><li>This mount is compatible with P1P/P1S/X1C/X1E.</li><li>I can only recommend the profiles I created (“Designer” print profile) for the best results.</li><li>Print using a filament that can withstand high temperatures (NOT PLA!), I used ABS, however, PETG should work just fine.</li><li>No support or brim is needed.</li><li>Here's the device I'm using, however, you can get the same from Amazon or other places. Search using the keywords “digital hygrometer thermometer”: <a target="_blank" href="https://a.aliexpress.com/_Evc7mN3" rel="nofollow noopener">https://a.aliexpress.com/_Evc7mN3</a></li></ul>&nbsp;<h3>*Update - 24th January 2024*</h3>Thanks to the feedback from <a target="_blank" href="https://makerworld.com/en/u/889139689" rel="nofollow noopener">@uberroot</a>, I have now added the “Short_Hygrometer_Mount” print profile, it has a much shorter stem compared to the first model ("Hygrometer_Mount"). While I didn't personally need this as I only use this setup for pre-heating the chamber, the updated mount allows you to view the hygrometer much earlier as the print continues and the build plate goes down.&nbsp;<h4>1. Importing:</h4>Import the 3MF file into the slicer and make sure the selected settings are correct (<a target="_blank" href="https://youtu.be/Jogiz4LRHvA?si=vDbJfsIZ-Rk5GJ4z" rel="nofollow noopener">video below</a>). I have already set the correct settings for the 3MF file, but it is a good practice to verify, and you still have to select your printer if it's not a P1S.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/Jogiz4LRHvA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Jogiz4LRHvA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<h4>2. Post-processing:</h4>After printing, use side cutters or, for a cleaner cut, flush cutters to trim the tip of the mouse ears (brim ears). You can also optionally sand down the edges for a smoother finish.&nbsp;<figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/727816/2024-01-20_b6951bc0b5cb6.gif"></figure>&nbsp;<h4>3. Installation:</h4>Just place the hygrometer/thermometer into the mount and clip the mount over the side rail of the printer as shown below.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/727816/2024-01-20_ce281e403ae8a.gif"></figure>&nbsp;<h3>Thank you for printing, please provide feedback and share your results! 😄</h3>

Printer Hygrometer/Thermometer Mount

Printer Accessories

Jaxel

2024-01-12: Changed the locking pins to have more strength and better alignment. Also added plates for all the different rotations of the tool holder.&nbsp;This model is designed to work with my <a target="_blank" href="https://makerworld.com/en/models/78138#profileId-82402" rel="nofollow noopener">Wall Control Universal Mounting System</a>.It uses some parts from that package in addition to the STL models in this package.&nbsp;These will hold any generic M12 tool such as drivers, drills, wrenches, ratchets, etc. Depending on how you want/need the tool oriented, there are 5 different stands facing various directions. Connect the wings to each side using biscuits and slot it into the pegboard. Once slotted, connect the top lock using a biscuit and screw it down using the locking pin.&nbsp;Parts required:<ul><li>M12 Tool Holder</li><li>Universal - Wing (2 slot) - Left</li><li>Universal - Wing (2 slot) - Right</li><li>Universal - Top Lock</li><li>Universal - Locking Pin</li><li>Universal - Biscuit (x5)</li></ul>You can find other models I have released for this mounting system here:<a target="_blank" href="https://makerworld.com/en/u/2811301167/collections/111107" rel="nofollow noopener">https://makerworld.com/en/u/2811301167/collections/111107</a>&nbsp;If you appreciate my models, please consider <a target="_blank" href="https://ko-fi.com/ultrajaxel" rel="nofollow noopener">buying me a coffee</a>!

Wall Control - Milwaukee M12 Generic Tools

Milwaukee

m.cody.sims

Just a good Mando helmet!&nbsp;My profile doesn&#39;t have support on the inside of the helmet because I have found it didn&#39;t really help that much with the quality and it used a lot of filament. the very center of the inside will be rough because of this but it hasn&#39;t been an issue for me.&nbsp;For those wondering what I use for a face sheild I use a Hobart 770580 Face Shield Replacement Lens, Shaded from Amazon. I cut it to shape and use a little bit of hot glue along the front and near the temples. That seems to be enough. I would recommend getting air soft helmet padding for a custom fit and comfort.&nbsp;If you like my work, please consider supporting me by boosting my model or <a target="_blank" href="https://www.buymeacoffee.com/m.cody.sims" rel="nofollow noopener">buying me a coffee</a>!

Mandalorian Helmet One Piece

Helmets

Kroeskoppie

Original Source Material: - Original Creator Blastoise Model: <a target="_blank" href="https://www.thingiverse.com/neb1236/designs" rel="nofollow noopener">neb1236</a> on <a target="_blank" href="https://www.thingiverse.com/thing:5162417" rel="nofollow noopener">Thingiverse.</a>- Original Creator AMS Version Blastoise Eyes: <a target="_blank" href="https://makerworld.com/en/u/3378101082" rel="nofollow noopener">Waikikiprod</a> on <a target="_blank" href="https://makerworld.com/en/models/13162#profileId-13157" rel="nofollow noopener">Makerworld</a>/<a target="_blank" href="https://www.printables.com/model/536623-bicolor-blastoises-eyes" rel="nofollow noopener">Printables</a>. Some small notes:  - Please support the original designers, they did the awesome job of making this model.  - For licences/selling the print: please contact the original designers, not me. I did not create this awesome model. - On 16-02-2024 , I created a printable version in Bambu Studio which should work on the A1 Mini. It has the same printing settings as the X1C/P1P/P1S version, but all the parts are divived on more plates, since the build plate on a A1 Mini Printer is quite a bit smaller. Maximum printtime for every plate has been reduced to 4 hours maximum because of this for ease of printing. - I am not able to test the A1 Mini Printing Profile, simply because I do not own this printer and only have a X1C. Use the profile on your own risk.  Description: A remix/share from the awesome Blastoise model. I have scaled all the parts to 150%, as I think a Blastoise should be bigger!This Blastoise is about 20 cm high and weights about 700 grams! I also did the following: - I used a 0.16 settings basefile I like and edited it. - I sorted all the different parts on different plates for easier printing, based on color. - The default eyes are replaced by the AMS version, which makes dual color printing possible. - I adjusted the flowrate in my settings profile so the coloring of the model should be the same overal. - I put ‘Ironing’ off in my settings profiles, since this would give coloring differences, most notable in the brown shell parts. - I fixed some of the more noticable parts that where having Top Layer Spheres by <a target="_blank" href="https://www.youtube.com/watch?v=h4SiDX0q0Xs&amp;list=LL&amp;index=1" rel="nofollow noopener">using this guide</a>.&nbsp;If there are more suggestions for better printing settings/profiles, please upload them!  The color sorting in the 3fm-file is based on the following filament that I used for this print: - Black: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B0BT9F3BCD/?_encoding=UTF8&amp;pd_rd_w=0HzkR&amp;content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&amp;pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&amp;pf_rd_r=NPE0CGVRYZDD97JQ8MTB&amp;pd_rd_wg=V4TwI&amp;pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&amp;ref_=pd_gw_ci_mcx_mr_hp_atf_m&amp;th=1" rel="nofollow noopener">eSUN PLA+ Black.</a> - Beige: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQH6H55/?_encoding=UTF8&amp;pd_rd_w=0HzkR&amp;content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&amp;pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&amp;pf_rd_r=NPE0CGVRYZDD97JQ8MTB&amp;pd_rd_wg=V4TwI&amp;pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&amp;ref_=pd_gw_ci_mcx_mr_hp_atf_m&amp;th=1" rel="nofollow noopener">eSUN PLA+ Beige</a>. - Blue: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQJ9H8F/?_encoding=UTF8&amp;pd_rd_w=0HzkR&amp;content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&amp;pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&amp;pf_rd_r=NPE0CGVRYZDD97JQ8MTB&amp;pd_rd_wg=V4TwI&amp;pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&amp;ref_=pd_gw_ci_mcx_mr_hp_atf_m&amp;th=1" rel="nofollow noopener">eSUN PLA+ Light Blue.</a> - White: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQ98RNP/?_encoding=UTF8&amp;pd_rd_w=0HzkR&amp;content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&amp;pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&amp;pf_rd_r=NPE0CGVRYZDD97JQ8MTB&amp;pd_rd_wg=V4TwI&amp;pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&amp;ref_=pd_gw_ci_mcx_mr_hp_atf_m&amp;th=1" rel="nofollow noopener">eSUN PLA+ Cold White.</a> - Brown: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQ75QG2/?_encoding=UTF8&amp;pd_rd_w=0HzkR&amp;content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&amp;pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&amp;pf_rd_r=NPE0CGVRYZDD97JQ8MTB&amp;pd_rd_wg=V4TwI&amp;pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&amp;ref_=pd_gw_ci_mcx_mr_hp_atf_m&amp;th=1" rel="nofollow noopener">eSUN PLA+ Brown.</a> - Grey: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B0BT9G9GMQ/?_encoding=UTF8&amp;pd_rd_w=0HzkR&amp;content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&amp;pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&amp;pf_rd_r=NPE0CGVRYZDD97JQ8MTB&amp;pd_rd_wg=V4TwI&amp;pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&amp;ref_=pd_gw_ci_mcx_mr_hp_atf_m&amp;th=1" rel="nofollow noopener">eSUN PLA+ Grey.</a> A complete timelapse video from all the plates/parts can be found here:<figure class="media"><oembed url="https://www.youtube.com/watch?v=sRZ0PQ6itUQ"></oembed></figure>

Signs

Fun Projects

Printer Accessories

Milwaukee

Helmets

Pokemon