Th3R1chH0b0

make3dtc

Version 2 Poop Filament Shadowbox&nbsp;I love shadowboxes see also my other shadowboxes and this one especially so you can finally use your poop waste or purgelines reasonably and do not need to dispose of them.There are 2 different versions small and large.The only thing you need is a thin Lexan plate or acrylic plate with a maximum thickness of 1mme.g. this one here <a target="_blank" href="https://tamico.de/killerbody-KB48527-Lexan-Platte-klar-203-x-305-x-10mm" rel="nofollow noopener">https://tamico.de/killerbody-KB48527-Lexan-Platte-klar-203-x-305-x-10mm</a>&nbsp;I Personally use the 0.4mm Sheet <a target="_blank" href="https://tamico.de/Tamiya-70127-Polystyrol-Kunststoffplatte-klar-04mm-B4-257x364mm-4" rel="nofollow noopener">https://tamico.de/Tamiya-70127-Polystyrol-Kunststoffplatte-klar-04mm-B4-257x364mm-4</a> There are 10 different pictures and 1 blank to design them yourselfSkull Duck Dog/Cat Dragon Animal paws Dino Bear paws Animal love Rabbit Brick figure Empty&nbsp;Support is needed for the cross brace of the housing see picture to get this off perfectly set the upper interface distance to 0.12mm so that it can be solved perfectly with me&nbsp;The base and the lid are simply clicked onto the housing Due to the different printers or settings, there may be deviations that it is easier for some and more difficult for others I first made a version where the Lexan sheet was in the front of the housing but unfortunately I only realized afterwards that the filament waste pushes this plate out from behind.&nbsp;That&#39;s why version 2 is now available here The plate is behind the picture. Which works much better. The empty plate can be made e.g. in the slicer itself. Or online in various programs.Or you have wishes then write to me and build it for you and upload it. &nbsp;&nbsp;&nbsp;&nbsp;Version 2 Poop Filament Schattenbox&nbsp;Ich Liebe Schattenboxen siehe auch meine anderen Schattenboxen und diese hier besonders damit kann man endlich seinen Poop Abfäll oder Purgelines noch vernüftig nutzen und brauch diese nicht zuentsorgen.&nbsp;Es gibt 2 Verschiedene Versionen Klein und Groß.&nbsp;Das Einzige was noch benötigt wird ist eine dünne Lexanplatte bzw. Acrylplatte in maximal 1mm Dickez.b. diese hier <a target="_blank" href="https://tamico.de/killerbody-KB48527-Lexan-Platte-klar-203-x-305-x-10mm" rel="nofollow noopener">https://tamico.de/killerbody-KB48527-Lexan-Platte-klar-203-x-305-x-10mm</a>&nbsp;Ich Persönlich nutze die 0.4mm Platte <a target="_blank" href="https://tamico.de/Tamiya-70127-Polystyrol-Kunststoffplatte-klar-04mm-B4-257x364mm-4" rel="nofollow noopener">https://tamico.de/Tamiya-70127-Polystyrol-Kunststoffplatte-klar-04mm-B4-257x364mm-4</a> Es sind 10 Verschiedene Bilder dabei und 1 Leere um die selber zu DesignenTotenkopf Ente Hund/Katze Drache Tier Pfoten Dino Bär Pfoten Tier Liebe Hase Brick Figur Leer&nbsp;Für die Querstrebe vom gehäuse siehe Bild wird Support gebraucht um diesen Perfekt abzubekommen stellt den Oberen Schnittstellenabstand auf 0.12mm ein damit lässt er sich bei mir Pefekt lösen&nbsp;Der Boden und der Deckel werden einfach nur auf das Gehäuse geklickt Durch die Verschiedenen Drucker bzw. Einstellungen kann es da zu abweichungen kommen das es bei manchen einfacher und bei anderen Schwerer drauf geht Ich hatte erst eine Version gemacht da war die Lexan Platte im gehäuse vorn aber leider ist mir danach erst aufgefallen das der Filament Abfall diese Platte von hinten raus drückt.Daher ist hier jetzt die Version 2 verfügbar Da ist die Platte hinter dem Bild. Was deutlich besser funktioniert. Die Leere Platte kann z.b. im Slicer selber gemacht werden. Oder Online in Verschiedenen Programmen gemacht werden.Oder ihr habt Wünsche dann schreibt mich an und baue es für euch und Lade es hoch. &nbsp;

Version 2 Poop Filament Shadowbox Little - BIG

Figures

xonggg

Introducing the Bum Buddy - your ultimate travel companion for a refreshing clean!&nbsp;Simply screw it onto any standard PET bottle like a bottle cap to get yourself a portable bidet in seconds! With its universal fit, it pairs perfectly with bottles of any size, making it super convenient for your on-the-go adventures.&nbsp;When nature calls, just give your bottle a squeeze, and let the invigorating jet stream of water work its magic. Perfect for those post-&#34;number 2&#34; moments when you need a thorough rinse. Compact and lightweight, the Bum Buddy is a must-have for travelers seeking that extra touch of cleanliness wherever they roam.&nbsp;Prints in about 30 minutes and does not require any supports!&nbsp;隆重推出 Bum Buddy - 您的终极旅行伴侣，让您焕然一新！&nbsp;只需将其像瓶盖一样拧到任何标准 PET 瓶上，几秒钟内即可获得便携式坐浴盆！它具有通用性，可与任何尺寸的瓶子完美搭配，让您在旅途中非常方便。&nbsp;当大自然召唤时，只需挤压您的瓶子，让令人振奋的水流发挥其魔力。非常适合“2 号”后需要彻底冲洗的时刻。 Bum Buddy 结构紧凑、重量轻，是无论在何处漫游都希望获得额外清洁感的旅行者的必备品。&nbsp;打印大约需要 30 分钟，并且不需要任何支撑！&nbsp;&nbsp;&nbsp;<a target="_blank" href="https://paypal.me/xonggg?country.x=SG&amp;locale.x=en_GB" rel="nofollow noopener">If you found this product helpful or enjoyed it, consider buying me a coffee :D</a>Your support helps keep the creative juices flowing! For enquiries: xavierongjh@yahoo.com

Bum Buddy: Travelling Bidet Sprayer for PET bottle

Camping

Create with Jake

Printed on a P1P by printing the blue first, then red, then white, then gray. Should be able to print on AMS printers as a single print. Snaps into standard hitch receiver.

Punisher Hitch Cover

Truck

SH Designs

Attach this adapter to any standard drill and stir stick for more effective mixing. Depending on your printer and printing results and stir stick sizes, you may need to increase or decrease the size for best fit. This was a solid fit for me that allowed me to easily attach and remove stir sticks from Sherwin Williams, Home Depot and Menards stores.

Stick-n-Spin Painting Tool

Tools

<h2>Flower Shaped Floating Can Cooler</h2> Introducing the Floating Can, a stylish and functional addition to your poolside retreat. Inspired by the graceful petals of sea roses, this innovative model brings a touch of floral elegance to your aquatic adventures.&nbsp;The Floating Can boasts a captivating floral design that effortlessly glides across the water&#39;s surface. Its buoyant construction ensures it remains afloat, bobbing gently along the pool&#39;s currents.But the Floating Can is more than just a pretty sight—it&#39;s a practical solution for keeping your beverages cool while you enjoy the pool. Featuring a secure compartment, it provides a safe space to store your favorite drinks, ensuring they stay refreshingly chilled in the warmth of the sun.Whether you&#39;re lounging poolside with friends or enjoying a solo swim, the Floating Can adds both style and convenience to your aquatic experience. Embrace the beauty of nature with this floral-inspired marvel, and elevate your poolside relaxation to new heights.&nbsp;Please note that the Floating Can is ideally designed to hold 0.33ml cans. While it has not been tested for larger and heavier cans, caution is advised when using them with this model.<h3>Print Instructions</h3>If you encounter difficulty printing certain overhangs and notice your print failing as a result, consider implementing support structures for assistance.&nbsp;

Flower Shaped Floating Can Cooler

Pool

OCDTOOLFREAK

Yes there are a lot of other battery holders including my own, BUT this one is king of aesthetics with its color a and design looking to par with the Milwaukee family of tools. Mounts solid to the wall and holds up to 4 of even 12 amp hour batteries. Hollowed out to not use so much plastic and and strong enough to keep them locked in. Lets face it we all buy the most expensive tools because A- They work great and B- They look good so the accessories have to match. UPDATE: I have now added the Packout feet so it can mount to the Packout wall mount system&nbsp;Thanks for the support and appreciation for my work…..as you all know printing can be expensive and creating takes time if you&#39;d like to support me even further then buy me a coffee here….. https://www.buymeacoffee.com/ocdtoolfreak

Milwaukee M18 battery 4x Packout wall mount

Milwaukee

Morris

Cute snowman you can build yourself - DIY!&nbsp;There are different arms, hats, caps, skis and mittens to choose from. Build your own. Print in different colors, put together with ordinary super glue.This enables hundreds of combinations.&nbsp;Please feel free to remix! Add your own accessories and let everyone take part of your creations! Make new arms, mittens, hats or maybe some ice skates?&nbsp;All holes in both head and torso are at a diameter of 5.2mm so it can easily fit arms, buttons, nose etc. with a diameter of 5mm.

Snowman DIY - Choose your own style!

Christmas

zach13

<h2>DOUBLE CHECK WHICH VERSION YOU NEED BY CHECKING THE VERSIONS BELOW.</h2><h2>Description:</h2>This is a stackable can dispenser. The purpose of this was to fit as many cans of different types as possible in my standard depth fridge which for my use case was the 12oz 7 can version. See the versions section at the bottom for what cans and what capacities are supported. Leave a comment if you'd like me to add a different can size, ideally with measurements.&nbsp;<h2>Printing:</h2>I printed with Bambu PETG Basic but whatever you have should be fine. The pegs that hold it together are fairly tight, scale them down if you need to, especially if you're using a brittle filament. You may also want to use brim on the pegs if you're not using something with good bed adhesion.<h2>Assembly:</h2>The parts are assembled with 20 pegs. You will need an additional 8 pegs per level you wish to stack. Super gluing the joints during assembly is recommended, though not completely necessary depending on your imperfection tolerance. &nbsp;<h2>Versions:</h2>12oz (355ml):<a target="_blank" href="https://www.crowncork.com/beverage-packaging/products/beverage-cans/12oz-355ml-standard" rel="nofollow noopener">Info</a><figure class="table"><table><thead><tr><th>Cans</th><th>Assembled Dimensions (WxHxL)</th><th>Notes</th></tr></thead><tbody><tr><th>8</th><td>134mm x 91mm x 545mm</td><td>278mm+ bed required, likely won't fit in most fridges. No print profile.</td></tr><tr><th>7</th><td>134mm x 91mm x 479mm</td><td>Should fit most American standard depth fridges</td></tr><tr><th>6</th><td>134mm x 91mm x 479mm</td><td> </td></tr><tr><th>5</th><td>134mm x 91mm x 347mm</td><td> </td></tr></tbody></table></figure>&nbsp;16oz (473ml):<a target="_blank" href="https://www.crowncork.com/beverage-packaging/products/beverage-cans/16oz-473ml-standard" rel="nofollow noopener">Info</a><figure class="table"><table><thead><tr><th>Cans</th><th>Assembled Dimensions (WxHxL)</th><th>Notes</th></tr></thead><tbody><tr><th>7</th><td>171mm x 91mm x 479mm</td><td>Should fit most American standard depth fridges</td></tr><tr><th>6</th><td>171mm x 91mm x 413mm</td><td> </td></tr><tr><th>5</th><td>171mm x 91mm x 347mm</td><td> </td></tr></tbody></table></figure>16.9oz (500ml):<a target="_blank" href="https://www.crowncork.com/beverage-packaging/products/beverage-cans/169oz-500ml-standard" rel="nofollow noopener">Info</a><figure class="table"><table><thead><tr><th>Cans</th><th>Assembled Dimensions (WxHxL)</th><th>Notes</th></tr></thead><tbody><tr><th>7</th><td>181mm x 91mm x 479mm</td><td>Should fit most American standard depth fridges</td></tr><tr><th>6</th><td>181mm x 91mm x 413mm</td><td> </td></tr><tr><th>5</th><td>181mm x 91mm x 347mm</td><td> </td></tr></tbody></table></figure>&nbsp;7.5oz (222ml): <a target="_blank" href="https://www.crowncork.com/beverage-packaging/products/beverage-cans/75oz-222ml-crownsleek" rel="nofollow noopener">Info</a><figure class="table"><table><thead><tr><th>Cans</th><th>Assembled Dimensions (WxHxL)</th><th>Notes</th></tr></thead><tbody><tr><th>8</th><td>118mm x 83mm x 481mm</td><td>Should fit most American standard depth fridges</td></tr><tr><th>7</th><td>118mm x 83mm x 424mm</td><td> </td></tr><tr><th>6</th><td>118mm x 83mm x 366mm</td><td> </td></tr></tbody></table></figure>