TazDaMan53

hdz3dworks

<h2>Auxillary Fan Forced Air Diffuser</h2> I noticed on long prints the left corners of my prints would lift more often than anything else on the build plate. I did some testing and when the auxillary fan is set to 70% by default it&#39;s still blowing a very strong concentrated stream of cooling air right across that side of the bed. This stream of air would hit the edges of the models and it forces them to cool sooner than the rest of your model on longer prints. I decided to make a diffuser style grill to break up the strong current of cold air across the model and make it a little easier on the part to reduce lifting. I made different versions to suit your air flow needs and so far I prefer the 60% rectilinear but the others do break up the strong air current as well but allow different amounts of air flow across the bed. I&#39;ll post some videos of the air current testing I did with my diffuser installed versus another printer with nothing on the auxillary fan output and the difference is pretty dramatic. The air flow with no restrictions is very strong and turbulent and with this grill in place it&#39;s a gentle stream of air that&#39;s not as turbulent but still moves enough air to do the job. To install: Start the back end of the rear fins into the slot just beyond the midway point then slide the remaining fins in and pushing them towards the opening until they&#39;re all inserted and tight against the front of the opening on the fan housing. You can adjust the fit and centering once the entire strip of fins is inserted. You will see that there is enough clearance for the toolhead to move in front of this diffuser but you have to make sure it&#39;s inserted all the way in and against the plastic fan housing.

Auxillary Fan Diffuser

need to print

crua9

I made this model to be extremely easy to print and cheap to make. The plate that has the dog all together is meant for an example, but you can print that. Just note it will cost more to print that and you need to have your flush settings right.&nbsp;I worked very hard on this model because the original was extremely far from user friendly. To the point I made it from scratch.&nbsp;If you print it unassembled, what I did was print it with PLA and then use superglue. The type I used was the brush on type like <a target="_blank" href="https://www.amazon.com/gp/product/B0161S0T2I/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;psc=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0161S0T2I/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;psc=1</a> What I was able to do is use one of the flames to hold the sign. But if it doesn&#39;t look right, I have made them where you it connects only to the base. It is just a little harder to glue it. Anyways, have fun with this and do whatever you want with this model. As mention I made everything, but this site treats it as a remix so the license has to be the same as what they think it came from.&nbsp;Another thing to note, the eyes are like they are because with a 0.4 nozzle I had problems with the color switching and white dots showing up on the black. At 0.2 this isn&#39;t a problem in my experience.

This is fine dog

memes 

DENIS GOMEZ

Spider Ham !!! High Resolution

spider-man

yaroslav haievskyi

Statue of a sitting ghost, I would really appreciate it if you would give me a heart at the top, thank you.Free 3d models in the group <a href="https://www.facebook.com/groups/free.3d.model.stl" rel="nofollow">https://www.facebook.com/groups/free.3d.model.stl</a>Category: Sculptures

A STATUE OF A SITTING GHOST

spooky stuff

lucamoretti86

ModelDo NOT adjust the size in your slicer!! The layers will not come out right. Do not change the size, this will cause errors in color change compromising the entire print. Use my print profile or you will not get the desired results. It can be printed safely without AMS and on any printer. I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you!&nbsp;Nozzle: 0.4Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Jade White At layer #16 (1.36mm) swap to Charcoal At layer #18 (1.52mm) swap to Gray At layer #20 (1.68mm) swap to Sakura Pink At layer #26 (2.16mm) swap to Jade White for the rest.

mickey mouse easter - HueForge

micky Mouse 