Tallness

AtzeDiggiBro

Minecraft Panda from the Trails & Tails Event&nbsp;I scaled it to 300%dimensions:&nbsp;length: 6cmwidth: 3,6cmheight: 3,6cm&nbsp;If you like to use my method of supports :&nbsp;To ensure a really clean surface of the belly I used a technique invented by a german youtuber @Manbo3D,using PETG for the connection between the support and the first layer of the supported model.Since PETG has different characteristics than PLA , it doesn't really connect to PLA, resulting to a really clean surface.Removing the supports will also be way easier than with normal PLA supports.&nbsp;&nbsp;&nbsp;Important information:<figure class="image image_resized image-style-side" style="width:32.31%;"><img src="https://makerworld.bblmw.com/makerworld/draft/463113/2024-01-28_94870449a7eea.jpg"><figcaption>flushing volume options</figcaption></figure><ol><li>be sure to set the flushing volume from the black PLA to the PETG (support) to 750 to ensure a clean print. (as you can see in the picture)</li><li>After removing the PLA support, the PETG support layer will still be sticked to the model. Just gently remove the PETG layer with a knife or a sharp object and it will come off really easy (I used a cutter knife).</li><li>Also ensure that you choose the right Filament (PETG) at the “support /raft interface” settings</li></ol>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;I will also upload a version with normal support settings.&nbsp;As always, I would like to hear your feedback!

Minecraft Panda "Trails & Tales Event" Version 

Hadley

techam

Small Stand for your Nintendo Switch Games.&nbsp;There are two versions, the taller one is meant for dual color printing.&nbsp;The second version was mady by me years ago, when multicolor-printing wasn't a thing, therefor the Logo is just an indentation and the Stand can be printed flat.&nbsp;Have Fun.

Hadley

Paul prints

Sarah prints