Russ

K3YPT1C

Project: nuka cola poster darker.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 135.06x210mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.4mm and the Actual Depth is 1.6mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Beige Transmission Distance: 8 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red.   in my photo i used eryone silk red At layer #14 (1.04mm) swap to Jade White At layer #17 (1.44mm) swap to Beige for the rest.&nbsp;for better results switch Beige for gold, but i dont have any gold left,i am new to making hueforge others will be uploaded soon

Hueforge - Fallout - Nuka Cola Poster

hueforge

Maoirae

Made night lamp with Fallout TV series design. This TV lamp is made to use Bambu LED lamp kit 001. There are two screens, one color and one just white. Inside of the lamp is colored with black arylic paint to block any light to come through body and over that is painted white for better light reflection through screen.

Fallout Lamp TV Vault boy Vault-tec

lamps

MindFlow

I was having some major motor overload / pullback issues with my Elegoo spools with the AMS . This was the reusable spool I could find I liked the most as it saved a lot of filament and worked great with a under 3h print ! The problem is , like almost every other reusable spool. these are made for bambu filament and have a small bulge in one of the sides which doesn't let other brands fit without making a small cut in the cardbox. I didn't want to spend the extra time dealing with that everytime so just removed the bulge and now it's a perfect fit for Elegoo spools and other brands , taking under 1 minute to remove cardbox sides and fit . Confirmed perfect fit for Elegoo, Polymaker and Overture Spools ! This remix is based on a remix of the original model with a label added

Reusable Hex Spool - Remixed for Generic Brands w/ Label

printer mods

Acheituno

I share this super hero brick inspired by the recogniced brick toys, but with the famous IRON MAN character from MARVEL&nbsp;This time I share a great paper or roll holder for your toilet or if you prefer it only as a decorative wall figure.&nbsp;Enjoy It!!

Iron Man Brick Toilet Paper Holder

iron man

3DPODesigns

After upgrading my P1P to a P1S I found my previous mount for my WyzeCam would no longer be useful. This solution enables you to still monitor your prints without worrying about opening or closing the door depending on the material being printed.Example pictured is printed at default .2 layer height settings with supports enabled.<figure class="image"><img src="https://media.printables.com/media/prints/550486/rich_content/76860d5f-e05c-4ce2-8028-d30732b52e74/thumbs/cover/800x421/png/screenshot-2023-08-11-185459.webp"></figure>&nbsp;Once printed, the bottom inserts can be used for either adhesive rubber in order to keep it non-slip but removable, or Medium Size Command Strips if you'd like a more semi-permanent solution(I haven't tested Command Strips yet, but the dimensions are correct per their description). I've opted for the non-slip rubber, and have included a small template in the files to help you cut out the correctly sized strips. I traced the template then used scissors to cut them out. Please trace the inner outline of the template for the correct size. <a target="_blank" href="https://www.amazon.com/gp/product/B08Y7N9652/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1" rel="nofollow noopener">Adhesive Rubber</a> used. (I've found its come in handy for other projects as well)<figure class="image"><img src="https://media.printables.com/media/prints/550486/rich_content/3e0902d8-8cf3-4894-a7e0-d6512a18f34c/thumbs/cover/800x600/jpeg/img_2864.webp"></figure>&nbsp;Simply place the mount on the top glass of your P1S, and it should slot right on top of the silver handle. <img src="https://media.printables.com/media/prints/550486/rich_content/6210911b-56ee-4886-beff-426b3f4f56b3/thumbs/cover/800x600/jpeg/img_2863.webp"> Obviously you will not be able to remove the top glass and use the camera at the same time, but if you're like me and have your AMS top mounted, it won't be a common thing anyway.<figure class="image"><img src="https://media.printables.com/media/prints/550486/rich_content/6760b0ff-3d49-410b-92d0-fd8cc06c6ae8/thumbs/cover/800x568/jpeg/img_2856.webp"></figure>The viewing angle of the camera isn't what I'd call ideal, but is perfect for monitoring each layer and the movement of the tool head which is what I'm most concerned with.IMPORTANT!: Night vision does NOT work as the glare from the IR Lights obstructs the image. Please print with your chamber light ON if using this setup. I would recommend disabling night vision all together. Also, turning off the “Camera Status Light” in advanced will get rid of that red dot you see in the photo.&nbsp;I'd recommend making something like this <a target="_blank" href="https://makerworld.com/en/models/28421#profileId-24869" rel="nofollow noopener">LED Riser for AMS</a> to help the quality of the video.The picture below is with the chamber light off and the LED Riser light on. The photo above is without and only with the chamber light.<figure class="image"><img src="https://media.printables.com/media/prints/550486/rich_content/b366c2e8-18cb-4900-ac04-c0aa7a0d0db1/thumbs/cover/800x455/jpeg/image01.webp"></figure>&nbsp;Please feel free to let me know if you have any issues with the model.&nbsp;&nbsp;If you found this model useful, please consider buying me a <a target="_blank" href="https://www.buymeacoffee.com/3DPO" rel="nofollow noopener">beer</a>, thanks!

hueforge

lamps

printer mods

iron man

stuff