SabreDesign

Ghost Pumpkin

0.2mm layer

Thanks a lot for altering the model! I had to change the support settings to get the mouth looking nice. Furthermore used variable layer hights. It looks georgeous! 

gerdjentz

The ultimate Panda Touch Dock V2.0.1 for BBL P1x

0.2mm layer, 3 walls, 20% infill

Thank you so much for this awesome model! Getting a USB-C cable into it was a bit challenging (I ordered an angled cable made from some kind of plastic and striped part of it down to the bare cables).

But well: it was definitely worth the effort!

Hugo

Foldable and stackable Crate

Foldable and stackable Crate, 0.2mm layer, 2 walls, 15% infill

This model is just awesome! Thank you so much for sharing your work!

I printed 10+ in three sizes, for now.. 

wuguigui

Shark Magnet

0.2mm layer, 2 walls, 15% infill

Thank you so much for sharing your work! Our small school of sharks looks so cute ;-)

I had some issues with getting the teeth fit and used some glue to make sure they will not come loose. But that is really not a problem. :-)

devilinside

Build Plate Holder V2 for 5 - 25 Plates

7 Plate 0.2mm layer, 3 walls, 15% infill

Great work! Thank you for sharing! :-)

Printed in PLA - extrudr NX2 metallic grey and Amazon Basics silk silver.

Clyde Frog

Reusable Soap Dispenser

Very easy print with a very nice result! Thank you for sharing! :-)

SK07 Skipper07

Windmill 2.2.4

0.16mm layer, 2 walls, 15% infill

That was a fun print! 

Scaling up to 135% resulted in the need to separate the green base into four tiles (using the easy way with Bambu Studio). I also used the other blades with the correct orientation. Needed to increase the infill to get a nice print result of the blades because of the upscale. 

Thank you so much for your nice work!

reddadsteve

Speedy Gonzales

0.2mm layer, 3 walls, 10% infill

Great model, nice to print - cute dynamic looking result! Thank you for sharing your work!

PS I sized it up by 25%.

JamesThePrinter

Woven Easter Basket

Full Basket

Very nice! Model and print settings work like a charm. Thank you for the work! - I used Sunlu PLA Rainbow 04 (not Silk) for this print.

Haruo

Donkey Kong Barrel

0.16mm layer, 4 walls, 15% infill

Wirklich wunderschön die Teile. Ich habe sie mir in mein  Büre gestellt und sie verändern die Atmosphäre wirklich sehr ins positive. Nur zu empfehlen!