Sziszi

___Sam___

Uses gyroid infil to silence the noise of deinflating a paddleboard when you let the air out of a paddle board it makes a very loud woosh so there are actualy silencers you can use to open the valve more quietly. So i designed my own verson, putting this into the valve opens it but then vents it out through the handle which is filled with open gyroid infil, forcing the air to slow down and be more released more gradualy. ideally print with the 3MF file as that has the print settings built in, the modifier allowes a clear path of infil for the air to escape. im afraid i havent printed it yet as winter has come in and i won't be using the board.

Gyroid Paddle Board Deinflation Silencer

MoltenPlastic3D

Custom open/closed led sign for your shop, I hope you enjoy! I make my boxes with a power switch, plug, and ac adapter for a cleaner more professional look. I also included my light box profile and filament profiles i use which helps to eliminate pinholes and wisps so feel free to try that out on the front plate i also have an A1 profile i will add later. For the base and back I tend to just use the generic bambu .24mm height profiles. I will include links to the hardware I use for mine. I included a generic backplate with a 16x8mm hole for whatever light setup you use. I will always post my designs on here free for you to use and sell, but feel free to use any of my links below or even buy me a coffee! :)&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/moltenplastic3d" rel="nofollow noopener">https://www.buymeacoffee.com/moltenplastic3d</a>&nbsp;LEDs: https://amzn.to/3OLypBJAC Adapter: https://amzn.to/49GPYuZFemale Plugs: https://amzn.to/3wlk1d7Switch: https://amzn.to/49yks2e

Hanging 2 Sided Open/Closed Light Box

Model

dangles_

VERSION 2Changes made to the main design and have been confirmed to be sturdier and easier to get the blade in. Old versions have been removed and print profiles for main model and shorter model have been added. Version 2 also includes a “push stick” in the profile to help safely install the blade. &nbsp;About the ModelCuter that makes cutting those annoying sheets of Christmas gift paper rolls smoother and cleaner. &nbsp;PartsDesign is based around a #11 Hobby Blade. Packs of a lot of these can be found on amazon for very cheap. &nbsp;AssemblyOnce printed and blades have been acquired, you can *carefully* slide a blade into the slot. Using the printed “push stick” to push the blade further in. The lower hole is designed to allow you to use a small screwdriver to pull the blade down into place (as well as take it out).

Wrapping Paper Roll Cutter (VERSION 2)

Tools

Bambu Lab

A1 mini test model - Swatch Display Board by Bambu Lab

SUP

Model

Tools

P1S