SwirlingAether

K2_Kevin

<h2>2 Versions!</h2><h2>Bambu Z-Axis Lead Screw Lube Helper!</h2>The Lube Helper tool will apply the perfect layer of lube on the lead screws on z axis.Designed to reach all lead screws on the X1C, P1, and A1 Series Printers.“It&#39;s a lube helper, a lubinator, the lubiest lead screw luber for your 3D Printer!  Introducing the Bam-Lube Tool, a lube helper that spreads the perfect amount of lube.”&nbsp;⭐️Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!<h3>How-To-Lube? Put grease on your tool, then rub your rods.</h3><img class="image_resized" style="width: 52.8%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472091/design/2024-05-31_af3c481da24bd.png">&nbsp;&nbsp;Design Notes:<ul><li>45° - A1/A1 Mini Profile / Version - Allows you to get into that channel on the A1 / A1 Mini</li><li>Perfect angle to apply correct amount of lube</li><li>Comply with my Bambu Tool Set style</li><li>Compatible with my Bambu Tool Set Holder</li><li>Magnet option</li></ul>&nbsp;<ul><li>PROFILE OPTIONS:</li><li>◉ PLA - BOTH TOOLS - Straight and 45° Tool(s)</li><li>◉ A1 Mini PLA - BOTH TOOLS - Straight and 45° Tool(s)</li><li>★️ TPU - (My Favorite)️️️️️️</li><li>◉ PETG - BOTH TOOLS - Straight and 45° Tool(s)</li><li>◉ ABS - BOTH TOOLS - Straight and 45° Tool(s)</li><li>► 45° - A1/A1 Mini - 45° Tool Only</li><li>► PLA - Straight Tool Only</li><li>► PETG - Straight Tool Only</li></ul>&nbsp;&nbsp;<a target="_blank" href="https://makerworld.com/en/models/478077#profileId-389176" rel="nofollow noopener">https://makerworld.com/en/models/478077#profileId-389176</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/478077#profileId-389176" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472091/design/2024-05-28_d462038107b57.png"></a>&nbsp;Check out more Bambu Tools <a target="_blank" href="https://makerworld.com/en/models/14462#profileId-37136" rel="nofollow noopener">Here</a>:<a target="_blank" href="https://makerworld.com/en/models/14462#profileId-37136" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472091/design/2024-05-22_8770b12c5c2fc8.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472091/design/2024-05-22_d4c231e3df5c18.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener"><img class="image_resized" style="width: 52.49%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472091/design/2024-05-30_50927ad4d1de.jpg"></a>

Bambu Z-Axis Lead Screw Lube Helper

Printer Accessories

Eternity Labs

I took my son to the beach over summer, it was a great day. The worst part was having to pay for a Water toy. &nbsp;I decided to make a toy for this competition so that other fathers/mothers out there could print a fun toy cheaply at home rather than paying holiday prices.&nbsp;The main water wheel will rotate when you spill water into the top!&nbsp;Bottom plate allows water to quickly leave the container ready to play again!&nbsp;Hours of fun at home or outdoors, this isn&#39;t just limited to the beach!&nbsp;I hope you enjoy this model.&nbsp;Consider giving me a boost if this model was useful!&nbsp;Ways to support me &amp; access to commercial licences:&nbsp;<a target="_blank" href="https://www.patreon.com/Eternity3D" rel="nofollow noopener">https://www.patreon.com/Eternity3D</a> - Free membership available for some .stl access, paid membership needed to resell prints of my designs.&nbsp;One Time Direct support - <a target="_blank" href="https://buymeacoffee.com/eternity3d" rel="nofollow noopener">https://buymeacoffee.com/eternity3d</a>

Water Wheel Toy for Home & Beach

Beach Toys!

goldiesvinyl

Axolotl Magnet

Magnets

MKCAMC

I created these signs to help celebrate the holiday season. Assembly is easy. The post has a piece that fits inside a hole in the bottom of the sign. Glue is recommended but not necessary. I hope you enjoy them!

Grinch Signs

Christmas

Williams Industries

This is included in my Patreon below, which will have about 100 files in total for the Halloween themed drop. This is a layered print and this is meant to be printed on a Bambu with AMS or Multicolor printer. Makes for great wall art, or you can scale it down and add a magnet on the back for a magnet. If you would like to sell this, please join my patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>

Happy Halloween Sign 

Halloween 

mcgybeer

Cute Mini Octopus, the original!It's designed so it can be printed at once. No assembly or supports required.Spare tentacle available as well, no need to discard failed prints!

Cute Mini Octopus

Toys

Sakul

A case with a Magnet in the bottom to prevent the needles from falling out.The top part is prrinted in TPU and should fit tightly on the case.&nbsp;Magnet dimensions: 47x22x10 cmSmaller should work too.

Spill Proof Needlebox with Magnet

Sewing

LoboCNC

This is a 3D printable version of the <a href="https://www.irwintools.com/product/59200cd/handi-clamps" rel="nofollow">Irwin Handi-Clamp</a>. Squeeze the handles to close it on your workpiece and the self-locking lever mechanism keeps it closed. Just press on the lever to release. Great for clamping jobs needing light pressure and one-handed operation. Opens 0 - 39mm (0 - 1.5 in).Everything presses or snaps together without glue or fasteners. If you want the clamp to automatically spring open, you will need one small rubber band, like the kind that comes on green onions.Printing You want to print this as rigid as possible. I used PLA with 5 perimeter lines and 30% infill. CF filled PLA would be even better. I used 0.2mm layer thickness.The bar and lever sides of the clamp do need some supports in specific areas, as indicated last photo. I recommend manually painting on supports as indicated rather than turning on automatic supports everywhere.Assembly The leaf spring has some built-in mouse-ear brims that need to be broken away first. Then insert the short leg of the spring into the slot in the lever-side handle. It should press into place. Then, slide the lever over the curved bar on the bar-side of the handle and place the two handle pieces together. The D-shaped pin should be a press fit into place but you may need to tap it into place lightly with a small hammer. (If your pin happens to be a little loose, you might try reprinting it scaled up by 0.5% or so.)To make it spring open automatically, you'll need to loop a thin rubber band through the eyelet in the bar-side of the handle and then hook the other end over the little nub on the other side as shown in the fifth photo.Operation Squeezing the clamp closed will cause the lever to slide along the curved bar and it self-locks into place when you stop squeezing. Pressing on the end of the lever will cause it to unlock. Note that the little leaf spring may not contact the end of the lever once the clamp is locked. The spring's job is to initially apply a light pressure to the lever to get it to start locking on the bar. When you stop squeezing the clamp, it will flex back and the spring will no longer touch the lever, but the self-locking will still stay engaged.And <a href="https://youtu.be/pHbJEg4Dp80." rel="nofollow">here </a>3Dprintsmith has posted a video of his build of the clamp.