Swayyzees 3D prints

crua9

I made this model to be extremely easy to print and cheap to make. The plate that has the dog all together is meant for an example, but you can print that. Just note it will cost more to print that and you need to have your flush settings right.&nbsp;I worked very hard on this model because the original was extremely far from user friendly. To the point I made it from scratch.&nbsp;If you print it unassembled, what I did was print it with PLA and then use superglue. The type I used was the brush on type like <a target="_blank" href="https://www.amazon.com/gp/product/B0161S0T2I/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;psc=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0161S0T2I/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;psc=1</a> What I was able to do is use one of the flames to hold the sign. But if it doesn&#39;t look right, I have made them where you it connects only to the base. It is just a little harder to glue it. Anyways, have fun with this and do whatever you want with this model. As mention I made everything, but this site treats it as a remix so the license has to be the same as what they think it came from.&nbsp;Another thing to note, the eyes are like they are because with a 0.4 nozzle I had problems with the color switching and white dots showing up on the black. At 0.2 this isn&#39;t a problem in my experience.

This is fine dog

dragons

Cherry Labs

<h2>Summary</h2>This phone/tablet stand is designed to be as universal as possible, print in place, and fold flat while being very durable. It comes in 3 sizes. Each variant is designed around its specific load.Small - 52x83x3mm - About the size of a credit card and I've been carrying one in my wallet for a few days now. This will work with any phone size. The largest I've tested is 6.3"Medium - 60x100x4mm - A stronger, more rigid variant. It can handle any phone size and I've tested it with tablets up to 9" in portrait and landscape.Large - 120x80x5mm - This is the overkill variant. I've found it to be practically unbreakable and it can handle even iPad Pro's. As you can see in the pictures, I've tested it with my 15" Macbook Pro.I've been asked a lot if I am willing to sell these and have started doing so on <a target="_blank" href="https://www.etsy.com/listing/651772961/universal-phone-tablet-stand-credit-card?utm_medium=SellerListingTools&utm_campaign=Share&utm_source=Raw&share_time=1539802739000&utm_term=so.slt/" rel="nofollow noopener">MY ETSY STORE</a>. I've made it available there in a variety of colours as well as Polycarbonate and nano diamond infused PLA.Please contact me if you would like a custom design. Custom designs are available as STL files and in any size batch production. Any custom design, (RAL++) colour and material, is of course possible.<h2>Print Settings</h2>Printer Brand: Prusa                                            Printer:                      i3 MK3&nbsp;Resolution: 0.10mm - 0.20mm                                            Infill:                      10% - 100%&nbsp;  Notes:   I recommend printing at 0.15mm layers to make sure the hinges come out correctly. It has been confirmed to work at up to 0.20mm layer height. It prints fine at lower infill but I opted to print mine with 100% infill and 5 perimeters for extra rigidity. I have only printed these with a 0.4mm nozzle and can't guarantee an easy time with larger nozzles there is at least 1 confirmed success with a 0.8mm nozzle.It has been successfully printed with a variety of PLA, ABS, NGEN, PETG and Polycarbonate filaments.<h2>Post-Printing</h2>Gently break the hinges loose. On a decently calibrated printer this requires little to no effort.This doesn't require any post processing.&nbsp;&nbsp;<h4>-------</h4>I've decided to upload my model here myself, because there have been more than a few people who tried to pass it off as their own, to get points in the rewards program.You can verify this is my model by checking out the attribution that Bambu labs themselves have listed here:https://wiki.bambulab.com/en/knowledge-sharing/Links-to-STL-models

Phone/Tablet Stand - Flat fold - Print in place!

HANDY MODELS

PennyD

&nbsp;Sleek lithophane globe base that uses an inexpensive LED light assemby that doesnt produce any heat. Supports are optional if printed upside down, but would improve overall quality inside the groove if used. Printed in silk PLA. Would be beautiful printed in wood pla and sanded and stained. Designed to fit the standard size lithophane globe generated by lithophanemaker.com If you change the cylinder ledge size, this stand will no longer fit. You may shorten the cylinder thickness to 4mm or stretch it out to make it taller if you like while designing the globe on their site. If you dont have good settings for a lithophane, see my other designs, I have one of my dog that you can use to get my settings and save as a print profile.My affiliate link for the lights I like:<a target="_blank" href="https://www.amazon.com/gp/product/B086VL9F8G/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B086VL9F8G/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1</a>&nbsp;&nbsp;

dragons

HANDY MODELS

lithos