Sw7897897

eds_3d_shop

🙏😊💬Quote from user feedback: &#34;…finally a design that is minimally invasive and works well all the time, does not fall down during operation, without danger of destroying LED and without having to stick some constructions on the first-stage-motors with double-sided adhesive tape!&#34; &nbsp;⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏 ! Please take bed adhesion very seriously when printing these little helpers, use 3DLAC OR GLUE STICK if necessary, BUT not BRIM, if you want a nice Logo quality! In my printprofile the color sequence is set so that the logo color is printed first in order to get very nice, sharp contours. When BRIM is switched on, Brim will also be printed in LOGO color and unsightly marks will be left on the edges !<h3>⚠️Does my AMS need version 2.1 or 2.0?</h3>If your AMS was delivered to you by Bambu Lab before October 2023, then just print version 3.0.If your AMS was delivered to you by Bambu Lab after October 2023, then I would simply measure the AMS Feeder Funel - see the pictures below.<h4>⚠️If the funnel diameter is about 14.3mm, then you should print version 2.0, if it is about 14.5mm, then print <a target="_blank" href="https://makerworld.com/en/models/187388#profileId-206439" rel="nofollow noopener">version 2.1</a>👌</h4><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2024-02-13_08bb8c9fc5171.png"><figcaption>If the funnel diameter is about 14.3mm - then you should print version 2.0</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2024-02-13_d9278fcd1061b.png"><figcaption>If the funnel diameter is about 14.5mm then print <a target="_blank" href="https://makerworld.com/en/models/187388#profileId-206439" rel="nofollow noopener">version 2.1</a></figcaption></figure></td></tr></tbody></table></figure>Thanks to my supporters and testers <a target="_blank" href="https://makerworld.com/en/u/2843581120" rel="nofollow noopener">@linshuuyuu</a>, <a target="_blank" href="https://makerworld.com/en/u/815356263" rel="nofollow noopener">CROKOBIBI</a>, <a target="_blank" href="https://makerworld.com/en/u/4070704053" rel="nofollow noopener">@TheEngineer</a>, <a target="_blank" href="https://makerworld.com/en/u/1817999304" rel="nofollow noopener">Susi-Knalltüte</a><a target="_blank" href="https://makerworld.com/en/u/1817999304" rel="nofollow noopener">@user_1817999304, </a><a target="_blank" href="https://makerworld.com/en/u/3627188750" rel="nofollow noopener">@Encore94</a> With their great help I was able to check and improve the functionality of the version 2.1!!! 🙏❤️👍&nbsp;<h3>Why this Version 2.0?</h3>There are several reports that AMS units that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Thanks to information from users, I made appropriate changes to my popular Feeder Protector and at the same time I made some improvements that I was able to collect from users over time.<ul><li>I titled the PTFE channel towards the spool so that the filament now has better guidance, even when the spool is almost empty.</li><li>The model is now even more suitable for Hydra Mod where PTFE no longer touches the AMS lid.</li><li>Few changes to the holding function, which now provides easier installation and good holding function.</li><li>PTFE path is now shaped in such a way that differences in the thickness of PTFE tube are no longer so important. I still recommend using a Bambu Lab PTFE, which is what I tested and have best expierience with.</li><li>And most important - version 2.0 now fits the old and new revisions of AMS feeding funnel.</li></ul>Thanks to my supporter and tester <a target="_blank" href="https://www.printables.com/de/@CerialPhreak_1003972" rel="nofollow noopener">@CerialPhreak_1003972</a>. With his great help I was able to check and improve the functionality for the Hydra mod and the new revision!!! 🙏❤️👍&nbsp;<h3>Bambu Lab X1 AMS Feeder Button Cover/Protector - what is that good for?</h3>I have read some reports that the abrasive filaments &#34;grind&#34; the feeders from AMS (which are from soft plastic too) very quickly! And this problem may <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-the-feed-funnel-assy" rel="nofollow noopener">affect the loading and unloading filaments</a> !<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 70.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2023-10-25_8hoqibaoyj3w.png"></figure></td><td><figure class="image image_resized" style="width: 66.69%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2023-10-25_u8iyxwgrbe3q.png"></figure></td></tr></tbody></table></figure>I found an interesting feeder cap at Printables (thank you, Maverick Ng, for sharing your model!) and reconstructed it so that the cap sits very stable on the feeder and can still be easily pulled on and removed. Look at Installation-Video on my Instagram Channel - its very easy! :-)&nbsp;For version 2.0 I achieved the best results with the PTFE length of 18mm. I used a replacement PTFE tube that came with my Bambu Lab X1 Carbon.&nbsp;Please read the print instructions carefully! They are important so that the small parts can be printed correctly and then sit and hold well on the feeder!<h4>Print / Install Instructions:</h4><ul><li>place them with the logo on the build plate</li><li>first layer line width: 0,36 (0.4 mm Nozzle)</li><li>first layer speed: 10ms per second (for perfect look of the button-surface)</li><li>2 perimeter, 4 top/bottom layer, 20% infill</li><li>take better PLA/ASA - they are stiffer, for better hold on the feeder</li><li>print layer height: 0.16mm and WALL generator: Classic (in this case please no Arachne) !!!</li><li>It is helpful to swith your Bambulab Printer from “Standard” Speed to “Quiet”!</li></ul>Cool recomendation from User <a target="_blank" href="https://www.printables.com/de/@SHAYDED_915092" rel="nofollow noopener">SHAYDED </a>(Thank you! :-): “If you are struggling with sagging, move the parts closer to the aux fan, orient the overhang towards it, and crank it up to 70-100%”. I had no problems with sagging (just printed 4-5 of them at once and slow), but why not? :-)Take a look at the Video/Post about this model on my instagram channel: <a target="_blank" href="https://www.instagram.com/eds_3d_shop/" rel="nofollow noopener">https://www.instagram.com/eds_3d_shop/</a>&nbsp;!!! Please take a look at this video, here you can see how you can easily get these protectors on the feeder properly!⚠️IMPORTANT!⚠️ You don&#39;t need to disassemble your AMS or remove any parts!<figure class="image"><a href="https://www.youtube.com/watch?v=B__yoIvm2HE" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2023-12-25_f39cd3895ac75.png"></a><figcaption><a target="_blank" href="https://www.youtube.com/watch?v=B__yoIvm2HE" rel="nofollow noopener">YouTube Video: Installation and removing of „Eds Perfect Fit Protector for BambuLab AMS Funnel-Feeder“</a></figcaption></figure>Short and cool description from User <a target="_blank" href="https://www.printables.com/de/social/35822-spectregadget" rel="nofollow noopener">SpectreGadget</a> : “Push forward with the back of the cap against the lever to snap it in place. Then line up an press firmly down to get over the existing inlet, until it snaps in place.”&nbsp;Please look at these pictures - good example of correct installation 👌😊👍<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2024-04-08_a801552bcd1f6.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2024-04-08_e60113e41f4b8.png"></figure></td></tr></tbody></table></figure>&nbsp;— ! —&nbsp;Thanks for downloading, rating in advance and please don&#39;t forget to like👍and to BOOST 🚀 this model! ;-)&nbsp;⚠️If you have an A1/A1mini with AMSlite - take a look at this design 🦾😊<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2024-05-18_ccdb0c618a4df.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td><td><figure class="image image_resized" style="width: 97.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2024-05-18_bfa54dc7f896d.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td></tr></tbody></table></figure><h3>Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2024-01-12_00009ce9c82bf.png"></a><figcaption>🔗<a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">Eds_3D_Shop designs on MakerWorld</a> 🔗</figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;&nbsp;

v.2.0 AMS Feeding Funnel Wear Protector

LordBoos

Skelly, the Skeleton Girl (Filament Painting) - HueForge<h4>Printing instructions:</h4>Filament swaps ONLY, no MMU or AMS required, but AMS makes it much easier.Use Original HueForge profile to get the intended look, my models are very sensitive to print settings because of color blending between layers. Every setting and filament changes for AMS are carefully prepared and fine-tuned in the Original HueForge print profile, feel free to change colors, but I recommend not to adjust other settings. If you want to experiment with your own settings or non-original print profiles, for best look print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm.You can use same filaments as I did, or you can experiment with your own.Don't forget to upload a make!<h4>Filaments Used:</h4><ul><li>PLA BambuLab Basic Black Transmission Distance: 0.6</li><li>PLA BambuLab Basic Blue Gray Transmission Distance: 3</li><li>PLA BambuLab Basic Beige Transmission Distance: 8</li><li>PLA BambuLab Basic Jade White Transmission Distance: 4</li></ul><h4>Swap Instructions:</h4><ul><li>Start with Black</li><li>At layer #7 (0.48mm) swap to Blue Gray</li><li>At layer #13 (0.72mm) swap to Beige</li><li>At layer #31 (1.44mm) swap to Jade White for the rest.</li></ul>

Skelly, the Skeleton Girl (Filament Painting) - HueForge

HueForge

brody.bolanos

Bambu Lab P1 / X1 Series Modular Bentobox Aux Fan (4/10/2023)Designed a modular second aux fan / bentobox for Bambu Lab printers. Assuming a lot of people will upgrade their P1P to the P1S, they will most likely have 2 aux fans now and this could be a good use for the 2nd one! This is separate from my other model ( <a target="_blank" href="https://makerworld.com/en/models/23644" rel="nofollow noopener">https://makerworld.com/en/models/23644</a> ) as this is meant for users that plan on using the printer in a both enclosed or open environment. Use the dual aux when printing PLA or filaments that need cooling in a non-enclosed setting. Switch over to the bentobox when printing enclosed with filaments that can release unpleasant or harmful odors. The bentobox will recirculate the air, passing it through the filters and ideally removing any odors. &nbsp;Contents<ul><li>Updates</li><li>Files</li><li>Additional Parts</li><li>Printing Information</li><li>Assembly</li><li>Wiring Options</li></ul>The X1 and P1 Version are different! This is to account for the Lidar clearance.&nbsp;This will only fit on the right side of the printer! You cannot mirror to work on the left, where the original fan goes, as the frame rails are are different heights ( among other things). <h4>Future Update (8/15/2023)</h4><ul><li>Working on an update that will mount the fan to the side panel. Now that P1 users have that option, it will be a faster print, save filament and save space if the fan base is no longer need. <ul><li>See “Test” folder, currently waiting on the new panels to verify fitment - 8/25/2023</li></ul></li></ul><h4>Update 7/28/23 </h4><ol><li>Finished the design for the upgraded fan ducts that provide airflow to the back, middle, and front of the build plate<ol><li><a target="_blank" href="https://makerworld.com/en/models/23661" rel="nofollow noopener">https://makerworld.com/en/models/23661</a> </li></ol></li></ol><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_9nmybmxrx1es.png"></figure><h4>Update 7/25/23 </h4>Added multiple wiring instructions.<ol><li>Using fan_1 port to power the aux. Control via Bambu Studios</li><li>Using fan_1 port to power the aux. Control via Gcode.</li><li>Keeping the fan_1 port open for the chamber temp fan, wiring 2nd aux to the 1st aux fan. Control via normal way.</li></ol><blockquote><h3>Files</h3></blockquote>Main Files<ol><li>Back Plate 3A</li><li>Dual Fan Stand 4A</li><li>Fan Case 6A</li><li>P1 Modular Fan Top 7A</li><li>X1 Modular Fan Top 8A</li></ol>Optional Bentobox Files<ol><li>HEPA Box 1A</li><li>HEPA Cover 2A</li><li>Carbon Box 5A</li></ol>Print File<ol><li>P1 Print File</li><li>X1 Print File</li></ol><blockquote><h3>Additional Parts </h3></blockquote>Base Components <ol><li>Aux fan <ol><li><a target="_blank" href="https://us.store.bambulab.com/products/auxiliary-part-cooling-fan-x1-series-and-p1p" rel="nofollow noopener">https://us.store.bambulab.com/products/auxiliary-part-cooling-fan-x1-series-and-p1p</a></li></ol></li><li>Qty 2 : M3*6</li><li>Qty 24: 6mm*3mm round Neodymium Magnets<ol><li><a target="_blank" href="https://www.amazon.com/dp/B09TQP1KZ5?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B09TQP1KZ5?psc=1&ref=ppx_yo2ov_dt_b_product_details</a></li></ol></li></ol>Optional Components for Bentobox<ol><li>Qty 1 : 80mm*40mm*15mm HEPA Filter<ol><li><a target="_blank" href="https://www.amazon.com/dp/B0782T7L6P?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B0782T7L6P?psc=1&ref=ppx_yo2ov_dt_b_product_details</a></li></ol></li><li>Acid-Free Carbon Pellets - Minimum 4mm Diameter<ol><li><a target="_blank" href="https://github.com/nevermore3d/Nevermore_Micro#sourcing-the-proper-acid-free-carbon" rel="nofollow noopener">https://github.com/nevermore3d/Nevermore_Micro#sourcing-the-proper-acid-free-carbon</a></li></ol></li></ol><blockquote><h3>Print Orientation</h3></blockquote><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_if06atl7nsy4.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_wu8wyw2misk2.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_opljwm8e6mbh.png"></figure>&nbsp;<blockquote><h3>Print Settings</h3></blockquote>DO NOT USE PLA, IT WILL BREAK. Please use PETG, ASA, PLA+ , etc. I used Polylite Pro PLA+Set your K calibration and adjust setting based on your filament Quality<ul><li>Please see build plate file. </li></ul>Support <ul><li>Please see build plate file. </li></ul>Other<ul><li>Bed adhesion - use brim if you're having adhesion issues, its already configured in the print file so please go over the settings first. </li></ul>* To remove the support from the fan top , I just used pliers and pulled the support out which was pretty easy. Sometimes some of the support stuck but it was easy to clean up with a small knife. The supports on the 2 larger tabs on the fan casing should looked at after the supports are removed, just make sure it's clean on the bottom side since these tabs are what hold it tight against the fan stand. &nbsp;<blockquote><h3>Assembly</h3></blockquote><ul><li>Remove the fan from casing, remove the sticker over the wiring and redirect the wiring as shown below. Don't put the fan in the printed case yet. </li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_h8qchxo18x22.jpg"></figure><ul><li>Glue in the 24 magnets<ul><li>3 on the stand</li><li>6 on the carbon box</li><li>8 on the HEPA box</li><li>4 on the HEPA cover</li><li>1 on the back plate</li></ul></li></ul>&nbsp;<ul><li>Place the fan into the new casing, make sure the fan is centered by using the alignment poles</li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_l8sga615s3jd.png"></figure><ul><li>Attach the back plate using re-using the 3 screws that originally held the fan into the casing. Tighten the screws 90% of the way making sure the backplate can still move a little.</li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_ivz5jsbdv186.png"></figure><ul><li>Slide the upper assembly onto the fan stand, same way as the OEM aux fan and use the 2 longer screws that come with the aux fan to tighten the case against the stand. Then make sure the back plate is squared up and tighten the 3 screws the remainder of the way.</li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_m97ksiyhwtqh.png"></figure>MOVE THE BUILD PLATE ALL THE WAY DOWN FOR THE NEXT STEPS<ul><li>The stand connects to the floor via lining up the L shape cutout with the L shape extrusion on the floor. There is also a caution sticker and under that sticker is a hole that we will use to screw the stand to the floor. I re-used 1 of the 2 shorter screws that came with the aux fan. </li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_rpgsoq1t540w.png"></figure><ul><li>Assemble the carbon box, HEPA box, HEPA cover. </li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_gdp6slsnyzis.png"></figure><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_uq7vh8ci03r6.jpg"></figure><ul><li>Rotate filter cover around ( the protrusion gets in the way of the bentobox) or use on the the below models<ul><li><a target="_blank" href="https://makerworld.com/en/models/23650#profileId-22261" rel="nofollow noopener">https://makerworld.com/en/models/23650#profileId-22261</a> </li></ul></li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_bxot5dhpbn0y.jpg"></figure><blockquote><h3>Bentobox</h3></blockquote><ul><li>To use the bentobox, slide the assembly onto the fan casing. The top of the HEPA filter cover needs to overcome the protrusion on the frame so it takes a little bit of force to push into place. Then use 2 M3x6 to hold in place.<ul><li>Once everything is printed, in place, and screwed down, the model will clear the printing plate. </li></ul></li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_hwr0s8qnv8na.png"></figure><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_4cla5v0yk5ma.png"></figure><blockquote><h3>Dual Aux</h3></blockquote><ul><li>Slide the fan top onto the fan casing and use 2 M3*6 screws to hold into place. <ul><li>Once everything is printed, in place, and screwed down, the model will clear the printing plate. </li></ul></li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_9lydrevbtgtz.png"></figure>&nbsp;<blockquote><h3>Wiring Options ( Option 3 is the best and requires no modifications to the existing aux fan wires)</h3></blockquote><h3>Option 1- Using the fan_1 port ( where the chamber fan would connect) and Bambu Studios to control the fan. </h3><ul><li>Follow the instructions to remove the back plate to plug in the aux fan. The fan plugs into Fan 1 while the original aux fan is plugged into Fan2</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_4maaef750gs9.jpg"></figure><ul><li>Cable manage the wiring </li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_la2mod8h0fai.jpg"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_6xjjld9r753r.png"></figure><h4>Bambu Studio</h4>So I know you can change the Gcode to make it work with the fan which is “M106 P3 S0 ; turn off chamber fan” (option 2 below) but you can also change the config to make it show up in Bambu Studio.<ul><li>For me on PC it's under C:\Program Files\Bambu Studio\resources . Open the Config file with an application like Notepad++ <a target="_blank" href="https://notepad-plus-plus.org/downloads/v8.5.1/" rel="nofollow noopener">https://notepad-plus-plus.org/downloads/v8.5.1/</a></li><li>Under "FUNC_CHAMBER_FAN" : false," change it to true ""FUNC_CHAMBER_FAN" : true," . Notepadd++ will ask to change this under administrator, click yes and save the file. </li></ul>{ "printers": [ { "display_name": "Bambu Lab P1P", "func": { "FUNC_CHAMBER_TEMP": true, "FUNC_FIRSTLAYER_INSPECT": false, "FUNC_AI_MONITORING": false, "FUNC_BUILDPLATE_MARKER_DETECT": false, "FUNC_FLOW_CALIBRATION": false, "FUNC_MONITORING": false, "FUNC_MEDIA_FILE": false, "FUNC_REMOTE_TUNNEL": false, "FUNC_LOCAL_TUNNEL": true, "FUNC_VIRTUAL_CAMERA" : false, "FUNC_PRINT_WITHOUT_SD": false, "FUNC_ALTER_RESOLUTION": false, "FUNC_CHAMBER_FAN" : false, "FUNC_EXTRUSION_CALI": true, "FUNC_PRINT_ALL" : false<ul><li>Re-open Studio and on the device screen you'll now see the chamber fan which is what we'll use to control the 2nd aux fan. </li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_s1q2y4ab0xi0.png"></figure>&nbsp;<ul><li>For the bentobox air flow, you only need to set a fan speed until you feel a breeze coming out of the top filter. </li></ul><h3>Option 2 - Using the fan_1 port ( where the chamber fan would connect) and Gcode to control the fan. </h3><ul><li>Same wiring as above but instead of changing the config file for Studios we change the gcode. This was suggested from @bjws_297864:<ul><li>Remove the filament start code that modifies the chamber fan and added this to the end of the printer start gcode: ;========turn on chamber fan to filter VOCs ============= {if filament_type[initial_extruder]=="ABS" || filament_type[initial_extruder]=="ASA" } M106 P3 S50 ; set chamber fan to 20% {endif}</li></ul></li></ul><h3>Option 3 - Wire the 2nd aux fan to the original aux fan. This way both fans are controlled as one without needing to change any code. This is how I have mine set up. </h3>What's required:<ol><li>JST MX 1.25 Connectors<ol><li><a target="_blank" href="https://www.amazon.com/gp/product/B0B3MSD154/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0B3MSD154/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1</a> </li></ol></li><li>Minimal soldering skill</li></ol><h4>Wiring Diagram </h4>Bambu wiring = Dark grey (GND) , Black (+), light grey ( tach) , white (pwm)<figure class="table"><table><tbody><tr><td> </td><td>Bambu </td><td>JST MX 1.25</td></tr><tr><td>+</td><td>Black</td><td>Red</td></tr><tr><td>-</td><td>Dark Grey</td><td>Black</td></tr><tr><td>Tach</td><td>Light Grey</td><td>Yellow</td></tr><tr><td>PWM</td><td>White</td><td>White</td></tr></tbody></table></figure>As pointed out by <a target="_blank" href="https://www.printables.com/@MozzieT_1023044" rel="nofollow noopener">@MozzieT_1023044</a> if you're wiring the 2nd fan into the existing one, it's probably best to only connect the PWM wire and not the Tach wire. The speed readout may get a bit confused as to the actual fan speed if the two fans pulses don't align for whatever reason. I still have my 2nd tach wire connected without any issues but I do plan on disconnecting it next time I take my panel off. -9/8/2023<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_7idliu8ym2h5.png"></figure><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_8ivrxuvjho5o.jpg"></figure><ul><li>Behind the power panel, there are two screws under -V and +V that aren't being used. I just wrapped the wire around these screws and tightened down. You should use a terminal ring but I didn't. </li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_j393m510343b.jpg"></figure>And finally how it all looks wired up:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/205537/2023-09-27_4so3n2cujura.jpg"></figure>That's all! &nbsp;If you like my designs and want to say thanks, you can buy me a coffee and help fund the filaments I need for prototyping. A donation of any amount to <a target="_blank" href="https://www.buymeacoffee.com/brodyB" rel="nofollow noopener">Buy Me a Coffee</a> or <a target="_blank" href="https://paypal.me/brodyb10?country.x=US&locale.x=en_US" rel="nofollow noopener">PayPal</a> would be greatly appreciated!&nbsp;As always, given different printing environments, filaments, etc., prints may not work perfectly for everyone. If you are having issues please message or comment and I will try my best to resolve the issue.

Bambu Lab P1 X1 Dual Aux Fan / Bentobox 7/28 Updated

Lüfter 

miham_3d

Easy print, cute owl led box. Easy to assemble, just glue the LED strip inside the lamp and glue the cover on top of the lamp.

Owl LED lamp

Adam L

Update 3/5/2023: I liked the bottom on another similar design so much that I came up with an alt-bottom edition to offer that as well (see STEP and STL files for the 10x2 mm magnet version).I wanted a neat way to store tea on a fridge or mini-fridge for easy access and visual identification, as these are common fixtures in offices. Should work on anything magnetic and flat-ish.Includes a slot to put one empty (or full) teabag to indicate what is stored inside.&nbsp;Printing notes:Printed in cloudy white PETG from California filaments using 2 walls, 10% gyroid infill, and tree support only on the dispenser hole overhang steep area (see pic for suggested paint-on support area). Cleanup should be minor, if any.Magnet notes:Included versions for 10x2 mm disc magnets, as well as 12x2 magnets. Use a drop of super glue to keep them in their little holes. Also included a STEP file for people to make different magnet variations if they wish.If you want other mounting options , see remixes.&nbsp;Author/license notes:It turns out someone else and I thought of very similar ideas at the same time independently, but the other post happened to come first. Therefore, to be safe, I listed this as a remix of <a href="https://www.printables.com/model/413856-tea-bag-dispenser/" rel="nofollow">https://www.printables.com/model/413856-tea-bag-dispenser/</a> to avoid violating any contest rules. If anyone happens to care for licensing reasons, I list this under my own license as I created this from scratch totally separately.

AMS

HueForge

Lüfter

Owl

Tee