Svsalgado

drones

lovelowpoly

Pla 0.2mmCan be attached with double-sided tape&nbsp;

Wall Flower Pot

plantas

CloudHD3D

Simple wall lamp for edison/vintage bulbs. The 3mf already have the files in the correct orientation and with the needed supports. &nbsp;I have printed on wood pla with success using a 0.6mm nozzle with a layer height of 0.20mm.Recomended infill between 10-15% with at least 2 walls&nbsp;

Edison Wall Lamp (vintage bulb)

Decoracion

vajcnerd

keychan nozzle, glue parts&nbsp;

Nozzle Keychan

fricadas

AMT_MW

<h2>What it is</h2>A compact tool to determine angles. It also includes a 120 mm linear scale and ring gauges from 1 to 9 mm in 1mm increments (clearance designed is 0.1 mm).<h2>What to print</h2>There are three parts awaiting you, which can be printed with raised or depressed digits & scales.<ol><li>upper part<ul><li>360° scale</li></ul></li><li>lower part variant 1<ul><li>1° vernier scale</li><li>collinear linear scales = 180°</li><li>one leg</li></ul></li><li>lower part variant 2<ul><li>1° vernier scale</li><li>collinear linear scales = 0°</li><li>two legs</li></ul></li></ol><h2>How to print</h2>Recommended is a 0.2 mm layer height and a 0.4 mm nozzle. Printing with a 0.6 mm nozzle and Arachne activated is possible.A multi color version is just a matter of filament swaps. → Prearranged .3mf files with two and three colors are provided, via copy & paste from them the wildest color combinations are achievable.Material at one's discretion, I used PETG in three different colors. Assembly works by simply clipping the parts together after printing. It should feel firm, move without any noticeable play and hold any angle on its own.<h3>Usage</h3>The resolution is 1°. Precision beyond that would in theory be possible with a finer vernier scale. I tried that as FFF-part but wasn't satisfied with the result. Diameter of the round part is 28mm inside (0.1mm clearance designed) and 60mm outside.The linear scales can be used to determine any length up to 120 mm, especially handy when measuring facets.<h4>What next</h4>There may be improvements and modifications based on feedback given here.<h4>Mentions</h4>The foundations for this design were laid by Pierre Vernier & Pedro Nunes a few hundred years ago.

Vernier bevel protractor - Goniometer | Rapporteur | Winkelmesser

Herramientas

Gregoune

Made initially for the Aeropress Go. allows storage and/or draining for the Aeropress, stirrer, spoon, cup and filters box.

AEROPRESS STAND

Cocina

TripleGWorkshop

My personal setup is this tiny spot!<figure class="image image_resized" style="width:64.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/119935/2023-10-25_bpdv9edn4z0b.jpg"></figure>

Fishing Pole Holder Wall Mount ANY Size

Ordenar

Fixumdude

Groovy little print in place old school VW Bus with rotating wheels.&nbsp;Introducing the FDM (Fixum Dude Motors) print in place VW Bus. Find the entire FDM Collection of vehicles here: <a target="_blank" href="https://www.printables.com/@fixumdude/collections/696315" rel="nofollow noopener">https://www.printables.com/@fixumdude/collections/696315</a>Prints without supports. Samples are printed in PLA with 0.2 layer height, at least 3 perimeters, and 10%-15% gyroid infill. Light blue example printed in Hatchbox Baby Blue PLA. V2 fixes some minor visual issues on the rear of the bus.

Fixum Dude Motors PiP WV Bus

juguetes

Raulito3d

Cute Christmas tree decoration, with a little touch of fitness.

Christmas Kettlebell

navidad

squinn

This print-in-place locking bag clip has been designed so that it can be printed without supports, has a fun curvy shape, uses an outward angled handle for easier one-handed use, and is a nice size at just under 6 cm when closed.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-21_kei37ynb43g3.gif"></figure>I'd recommend you set the “Strength→ Wall Loops" option to at least 5 for increased strength. In addition to the STL, I'm also attaching the Fusion360 file if you'd like to make adjustments.&nbsp;The original “Cam Lock Bag Clip.stl” (which I'd still recommend you start with if you're printing in PLA) is designed with a .2 mm tolerance around the pivot joints. If you have trouble with the plastic fusing in your print conditions though or are printing in other materials - such as PETG, I've now also attached two versions that increase the spacing tolerance slightly (.3 mm and .4 mm) which you could use as an alternative.&nbsp;This is a complete from-scratch design, but there are many great cam locking clips. Although notably different, I've marked this model as a remix of the very cool model that ‘jfedor’ did which used a similar approach for making a clip printable without requiring supports (which itself was a remix of Andrei's popular version that does require supports).

Curvy Cam Lock Bag Clip

cosas

Factorian Designs

Looking for a chic and modern vase design? Check out my 3D printable vase! With a sleek and minimalistic aesthetic, this vase is perfect for adding a touch of elegance to your living space. 3D printed this vase is both durable and visually appealing. Its unique design allows it to blend seamlessly into any interior style, from contemporary to traditional.&nbsp;Customize your vase size, its is easy to print and can be tailored to your exact dimensions. Whether you&#39;re looking to display fresh flowers or simply add a stylish accent to your decor with dried flowers, this vase is sure to impress.&nbsp;Download yours today and start creating your own beautiful and functional vases!&nbsp;&nbsp;🔹 DETAILS 🔹- quick and easy print, print instructions in download included! - perfect to print in vasemode! (spiralize outer contur/ Spiral vase mode in some slicers) - no supports, brim or raft needed! - vase in pictures are 180mm and 230mm tall - a little gravel, sand or stones should be added on the inside to keep your vase from falling over - the vase with a different shape can also be downloaded, see my profile&nbsp;➜ Premium designs and other platforms:<a target="_blank" href="https://factoriandesigns.com/" rel="nofollow noopener">Premium Designs</a>&nbsp;A heartfelt thank you to everyone who supports my work!&nbsp;----&nbsp;❗ For Private Use Only! Commercial License?If you&#39;re looking to sell my printed models commercially, **subscribe to my patreon** and gain access and selling permissions for all my designs. Additional benefits include e-commerce support, slicing guides and product picture usage! <a target="_blank" href="https://www.patreon.com/FactorianDesigns" rel="nofollow noopener">Patreon Commercial License</a>&nbsp;----&nbsp;🎨 MORE  DESIGNS  You like the art style? Then take a look at my other creations!: <a target="_blank" href="https://makerworld.com/en/u/845620596" rel="nofollow noopener">Maker World Designs</a>&nbsp;or find me at: <a target="_blank" href="https://factoriandesigns.com/" rel="nofollow noopener">Factorian Designs</a>&nbsp;---&nbsp;✔️ Want my favorite 3D-printing equipment &amp; filament ? Get it here!<a target="_blank" href="https://factoriandesigns.com/products" rel="nofollow noopener">Recommended Equipment &amp; Filament</a>

MODERN VASE "MEEK": Add Style to Your Home Decor!

regalos

TerTerro

Train Tracks compatible with Brio/IkeaFlexi tracks, can easy bent to needed shape.

Train Tracks compatible with Brio/Ikea - Flex A style

trenes

Dingus Dude

To be sure you're always downloading the most up to date file, use my “DD” profiles. See changelog below for detailed updates.&nbsp;BetterBoxPrint In Place With Customizable Dividers&nbsp;This is another version of my Print In Place Hinged Box and part of my BetterBox series!Check out the rest of the lineup below to find the ones that fit your needs!<figure class="table" style="float:left;width:35%;"><table class="ck-table-resized" style="border:2px solid hsl(0, 0%, 100%);"><colgroup><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/52786#profileId-54587" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377450/2023-10-31_730cd850c55aa.gif"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/52786#profileId-54587" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/52786#profileId-54587" rel="nofollow noopener">Double The Storage Flip Top</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/22697#profileId-20609" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377450/2023-10-27_f53e9d31a992f8.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">Original Bambu Parts Box</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/45918#profileId-47727" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377450/2023-10-27_50d65c4b44a158.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/45918#profileId-47727" rel="nofollow noopener">Empty Storage Box</a></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;-Now back to the box that you came here for-&nbsp;This fits X1C/X1E and P1P/P1S hot end assemblies. Note: The hot ends must have the fan installed on them to fit.&nbsp;FEATURES:&nbsp;Print In Place Hinged Box&nbsp;Hotend Assembly Holders:<ul><li>Has small retainers in the space that securely holds the hot end assemblies in place. It's designed to be a snug fit so they don't fall out when you close the box. See the gallery for detailed look.</li></ul>Compartments:<ul><li>Fully customizable! Use all the included dividers or print any of the ones you want plus more. Whatever you want to store, this box can accommodate. Please share how yours is arranged! There are litterally HUNDREDS of variations! Mix and match divider colors to help organize!</li></ul>&nbsp;Box Dimensions175mm length107mm width (not including hinge and latch)61mm height (closed)&nbsp;Thanks to <a target="_blank" href="https://makerworld.com/en/u/4049918149" rel="nofollow noopener">Nanodesigner</a> for making a 3D model of the Bambu Lab X1C Nozzle! You can find that here: <a target="_blank" href="https://makerworld.com/en/models/14019" rel="nofollow noopener">link</a>&nbsp;&nbsp;&nbsp;Of course it's not necessary but if you want to add to my <a target="_blank" href="https://paypal.me/davebarbier?country.x=US&locale.x=en_US" rel="nofollow noopener">beer fund</a> it would be much appreciated! 😄&nbsp;

BetterBox - Customizable Divider Bambu Parts Box

bambu

eds_3d_shop

🙏😊💬Quote from user feedback: &#34;…finally a design that is minimally invasive and works well all the time, does not fall down during operation, without danger of destroying LED and without having to stick some constructions on the first-stage-motors with double-sided adhesive tape!&#34; &nbsp;⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏 ! Please take bed adhesion very seriously when printing these little helpers, use 3DLAC OR GLUE STICK if necessary, BUT not BRIM, if you want a nice Logo quality! In my printprofile the color sequence is set so that the logo color is printed first in order to get very nice, sharp contours. When BRIM is switched on, Brim will also be printed in LOGO color and unsightly marks will be left on the edges !<h3>⚠️Does my AMS need version 2.1 or 2.0?</h3>If your AMS was delivered to you by Bambu Lab before October 2023, then just print version 3.0.If your AMS was delivered to you by Bambu Lab after October 2023, then I would simply measure the AMS Feeder Funel - see the pictures below.<h4>⚠️If the funnel diameter is about 14.3mm, then you should print version 2.0, if it is about 14.5mm, then print <a target="_blank" href="https://makerworld.com/en/models/187388#profileId-206439" rel="nofollow noopener">version 2.1</a>👌</h4><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2024-02-13_08bb8c9fc5171.png"><figcaption>If the funnel diameter is about 14.3mm - then you should print version 2.0</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2024-02-13_d9278fcd1061b.png"><figcaption>If the funnel diameter is about 14.5mm then print <a target="_blank" href="https://makerworld.com/en/models/187388#profileId-206439" rel="nofollow noopener">version 2.1</a></figcaption></figure></td></tr></tbody></table></figure>Thanks to my supporters and testers <a target="_blank" href="https://makerworld.com/en/u/2843581120" rel="nofollow noopener">@linshuuyuu</a>, <a target="_blank" href="https://makerworld.com/en/u/815356263" rel="nofollow noopener">CROKOBIBI</a>, <a target="_blank" href="https://makerworld.com/en/u/4070704053" rel="nofollow noopener">@TheEngineer</a>, <a target="_blank" href="https://makerworld.com/en/u/1817999304" rel="nofollow noopener">Susi-Knalltüte</a><a target="_blank" href="https://makerworld.com/en/u/1817999304" rel="nofollow noopener">@user_1817999304, </a><a target="_blank" href="https://makerworld.com/en/u/3627188750" rel="nofollow noopener">@Encore94</a> With their great help I was able to check and improve the functionality of the version 2.1!!! 🙏❤️👍&nbsp;<h3>Why this Version 2.0?</h3>There are several reports that AMS units that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Thanks to information from users, I made appropriate changes to my popular Feeder Protector and at the same time I made some improvements that I was able to collect from users over time.<ul><li>I titled the PTFE channel towards the spool so that the filament now has better guidance, even when the spool is almost empty.</li><li>The model is now even more suitable for Hydra Mod where PTFE no longer touches the AMS lid.</li><li>Few changes to the holding function, which now provides easier installation and good holding function.</li><li>PTFE path is now shaped in such a way that differences in the thickness of PTFE tube are no longer so important. I still recommend using a Bambu Lab PTFE, which is what I tested and have best expierience with.</li><li>And most important - version 2.0 now fits the old and new revisions of AMS feeding funnel.</li></ul>Thanks to my supporter and tester <a target="_blank" href="https://www.printables.com/de/@CerialPhreak_1003972" rel="nofollow noopener">@CerialPhreak_1003972</a>. With his great help I was able to check and improve the functionality for the Hydra mod and the new revision!!! 🙏❤️👍&nbsp;<h3>Bambu Lab X1 AMS Feeder Button Cover/Protector - what is that good for?</h3>I have read some reports that the abrasive filaments &#34;grind&#34; the feeders from AMS (which are from soft plastic too) very quickly! And this problem may <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-the-feed-funnel-assy" rel="nofollow noopener">affect the loading and unloading filaments</a> !<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 70.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2023-10-25_8hoqibaoyj3w.png"></figure></td><td><figure class="image image_resized" style="width: 66.69%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2023-10-25_u8iyxwgrbe3q.png"></figure></td></tr></tbody></table></figure>I found an interesting feeder cap at Printables (thank you, Maverick Ng, for sharing your model!) and reconstructed it so that the cap sits very stable on the feeder and can still be easily pulled on and removed. Look at Installation-Video on my Instagram Channel - its very easy! :-)&nbsp;For version 2.0 I achieved the best results with the PTFE length of 18mm. I used a replacement PTFE tube that came with my Bambu Lab X1 Carbon.&nbsp;Please read the print instructions carefully! They are important so that the small parts can be printed correctly and then sit and hold well on the feeder!<h4>Print / Install Instructions:</h4><ul><li>place them with the logo on the build plate</li><li>first layer line width: 0,36 (0.4 mm Nozzle)</li><li>first layer speed: 10ms per second (for perfect look of the button-surface)</li><li>2 perimeter, 4 top/bottom layer, 20% infill</li><li>take better PLA/ASA - they are stiffer, for better hold on the feeder</li><li>print layer height: 0.16mm and WALL generator: Classic (in this case please no Arachne) !!!</li><li>It is helpful to swith your Bambulab Printer from “Standard” Speed to “Quiet”!</li></ul>Cool recomendation from User <a target="_blank" href="https://www.printables.com/de/@SHAYDED_915092" rel="nofollow noopener">SHAYDED </a>(Thank you! :-): “If you are struggling with sagging, move the parts closer to the aux fan, orient the overhang towards it, and crank it up to 70-100%”. I had no problems with sagging (just printed 4-5 of them at once and slow), but why not? :-)Take a look at the Video/Post about this model on my instagram channel: <a target="_blank" href="https://www.instagram.com/eds_3d_shop/" rel="nofollow noopener">https://www.instagram.com/eds_3d_shop/</a>&nbsp;!!! Please take a look at this video, here you can see how you can easily get these protectors on the feeder properly!⚠️IMPORTANT!⚠️ You don&#39;t need to disassemble your AMS or remove any parts!<figure class="image"><a href="https://www.youtube.com/watch?v=B__yoIvm2HE" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2023-12-25_f39cd3895ac75.png"></a><figcaption><a target="_blank" href="https://www.youtube.com/watch?v=B__yoIvm2HE" rel="nofollow noopener">YouTube Video: Installation and removing of „Eds Perfect Fit Protector for BambuLab AMS Funnel-Feeder“</a></figcaption></figure>Short and cool description from User <a target="_blank" href="https://www.printables.com/de/social/35822-spectregadget" rel="nofollow noopener">SpectreGadget</a> : “Push forward with the back of the cap against the lever to snap it in place. Then line up an press firmly down to get over the existing inlet, until it snaps in place.”&nbsp;Please look at these pictures - good example of correct installation 👌😊👍<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2024-04-08_a801552bcd1f6.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2024-04-08_e60113e41f4b8.png"></figure></td></tr></tbody></table></figure>&nbsp;— ! —&nbsp;Thanks for downloading, rating in advance and please don&#39;t forget to like👍and to BOOST 🚀 this model! ;-)&nbsp;⚠️If you have an A1/A1mini with AMSlite - take a look at this design 🦾😊<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2024-05-18_ccdb0c618a4df.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td><td><figure class="image image_resized" style="width: 97.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2024-05-18_bfa54dc7f896d.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td></tr></tbody></table></figure><h3>Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052774/design/2024-01-12_00009ce9c82bf.png"></a><figcaption>🔗<a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">Eds_3D_Shop designs on MakerWorld</a> 🔗</figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;&nbsp;